Regarding the upgrade of RAM

Similar Questions

• The upgrade of RAM will improve the speed side Windows and Mac?

  I use VMware fusion for music production and this program requires plenty of work. I have a MacBook Pro 4 GB of ram and when I turn on VMware it goes to 2 GB of ram in Mac and 2 GB ram under windows. My Mac's speed is normal when VMware fusion is off but when I turn on my Mac is very slow. The upgrade of ram will improve the speed on mac and also windows (windows is also very slow)

  BTW, my English is not very good

  Well, take a peek in the Windows Task Manager to see how much memory is required/used. If an operating system requires more memory available, it will start to swap out the disk, which will introduce a huge performance impact. If the answer to your question is probably yes.

  André

  PS: After adding memory to the host, you must also change the client memory for the virtual machine.

• Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

  Hello

  I have two questions:

  1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  However, it seems that I can't enter the BIOS more.

  I tried several buttons, but it just won't let me get bios of the laptop more.
  Which button to use to access the BIOS?

  2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  Are there recommended RAM sets should I use because of compatibility issues?

  Thanks in advance for any help.

  Kind regards.

  > 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  > However, it seems that I can't enter the BIOS more.

  To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

  > 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  > Are there any sets recommended RAM should I use because of compatibility issues?

  Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
  Value report great price

• the upgrade my ram and gpu

  Product name: HP 1000 Notebook PC

  Product number: F0C66PA #ABG

  I want to upgrade my ram 6 GB or 8... I do not know the maximum capacity of my laptop and it is also possible to add a gpu in this laptop?

  No manuals or technical information available to me,

  He said:
  http://images.crucial.com/upgrade/HP+-+Compaq-memory/HP+1000+series/HP+1000-1410AU-upgrades.html

  GPU in most laptop today cannot be upgraded, it integrated or soldered on motherboard in the round.

  Kind regards

• The upgrade of RAM and adding the Bluetooth Module in VOSTRO 1500

  Hello

  I'm planning to upgrade my laptop RAM 3 GB to 1 GB and also bluetooth with it.

  There will be problems in the upgrade. I am currently using VISTA ULTIMATE SP1.

  Dell Vostro 1500 / Core 2 duo 1.66GHZ/120Go/Vista Ultimate SP1.

  Please give me suggestions on this.

  Kind regards

  Maryse

  
  

• Satellite P10 804 will not accept the upgrade of RAM

  Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

  In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

  Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

  The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

  Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

  Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

  1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

  The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

  Any advice welcome. Thanks for reading.

  > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

  Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

  The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

  So it must be a module problem

• Where to buy the upgrade of RAM for my Satellite M30-344?

  Hello

  I want to upgrade my RAM from 512 MB to 2 GB memory. After reading in the nets, he would say the PC 2700 DDR SODIMM (33135 PA-2MIG) would correspond to my laptop. Anyone know where to buy it? could not find it on ebay and other suppliers of portable... Is it too old and trade off already?

  See you soon,.

  Kat

  Where to buy?

  Hey buddy don't you hear something on the shops online, amazon, ebay, etc.  ;)

  If you know what Rams are compatible, then simply google for some nice offers.

  You can also buy it at a computer retailer in the city center

  As you can see, you have more options.

  Good bye

• Laptop computer ZE5700 The wired connection is not picking up or connection/Can the upgrade of RAM at 2-4 GB

  Help, please. I am preparing my very old laptop that I found in my garage for a work at home job contract. I decided to see if this is true for her to make the laptop to meet the minimum requirements before as I have buy a modernized one. I have no problems with the Wi - Fi connection and I wish it was one of the requirements. But the laptop should be wired. I plugged my ethernet cable in the assigned location, it shows that it is running, because there is a green/yellow light in the port. Even if the CAP is turned on and is, it does not show as a network.

  Also can I take the RAM at least 2 to 4 GB

  Thank you

  Theresa Metel

  Hi TheresaMetel:

  Thank you for your inquiry.

  I hope you had a good weekend.

  I send a link to a document on "Ethernet" click here, click the link for the Internet solution and connection to the local network using an Ethernet cable.

  Your computer is a CTO model and therefore there is no online prescription.

  I provided you a link to the user guide, click here.

  I am also you send a link to a document ' Memory Specifications and upgrade of RAM (Windows XP, 2000 and 98) " click here.

  I hope these are useful to make your decision.

• G42-490TU: advice on the upgrade of RAM - Cd u pls answer by 08/11/2015

  Hello

  My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
  RAM: 2.00 GB system Type: 32-bit operating system.

  I thought to increase RAM to improve efficiency, speed of my PC.

  Could you please suggest which RAM should go for? I will buy a new RAM or the existing RAM can be improved?

  This is the first time, I'll increase RAM, please advise how to do with less spending of cost with the purchase of RAM and still receive many resulting new RAM?

  If possible, pls answer by 08/11/2015 as snack, I have to buy a new RAM, I could get a good deal.

  Thank you best regards &,.

  Isha

  Hey @HPIsha,

  I recommend 2 x 4 GB. Your system is a maximum of 8 GB of RAM. Your guide showed you how to change the memory. Very easy.

  Thank you.

• After the upgrade of RAM it take too long to begin and start windows.

  Original title: laptop

  Hello

  I have (HP compaq presario V6615EN)
  Core 2 duo 1.83 GHz
  2 GB OF RAM
  Windows vista Home premium 32-bit
  It took 20 seconds to start and windows boot
  (Yes, only 20 seconds)
  When I upgraded my ram to 4 GB it takes too long to start and windows boot
  nearly 160 seconds

  Hello

  1 - is the operating frequency of the matches with the 'old' RAM newly installed?
  2. how many RAM sticks are there?
  
  Let's try the following steps:

  Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

  If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

  For more help, I suggest that you post your question in the HP support forum.

  http://h30434.www3.HP.com/PSG/

• Some problems with the upgrade of RAM on Lenovo ThinkPad T500?

  Hello

  My laptop is Lenovo ThinkPad T500 and its main features as follows:

  -Processor Intel Core 2 Duo T9400 (2.53 GHz, 1066 MHz, 6MBL2).

  - 4 GB PC3 - 8500 DDR3 SDRAM 1067 MHz SODIMM Memory (2 DIMM).

  -ATI Mobility Radeon 3650 with 256 MB.

  I really need to upgrade the RAM to work with SharePoint 2010 and Windows Server 2008 R2. and my big question is:

  * How many memory locations that I have in my Lenovo ThinkPad T500?

  I read on (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55644#t) that the maximum memory size for T500 is 8 GB.

  Yes, in case if my Lenovo ThinkPad T500 laptop has only two memory slots, so, I'll have to buy 2 memory cards of ThinkPad 4 GB PC3-8500 DDR3 Low-halogen SO-DIMM, in order to get the 8 GB... and I have to throw my current memory cards...

  My other question is:

  * Is easy to install/remove RAM in Lenovo ThinkPad T500?

  Sorry to ask the second question, but I have never dealt with before material.

  I would appreciate your inputs.

  Thank you for your consideration of my request and I look forward to hearing from you soon!

  The T500 has only two slots of RAM, so the upgrade to 8 GB would mean that your two existing 2 GB modules would need to be removed.

  Replacement of the RAM is simple; Remove the four screws for the Palm and the locations of memory will be under the palm rest.

  See the HMM for more detailed instructions: http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.html

• XPS 8700 does not start after the upgrade memory RAM

  Dear members of the Forum.

  I have a XPS 8700 with the following specifications:

  Core i7 4770 k

  2 TB HARD DRIVE

  16 GB of Ram (4 x 4 GB)

  NVidia GTX 660 (1.5 GB)

  BIOS version A10 (later).

  RAM sticks in my current system are all Micron Tech (here) 4 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s.

  I had two RAM modules of tech Micron (here) 8 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s so that I can move on to a total of 24 GB.

  After the discussion here and here, I installed the modules in slots 1 & 2 (both white) so that the system is not able to start. Not even got the bios screen. I also tried 3 & 4 configuration (both black) I ran my computer with the two 8 GB sticks only, with the same unfortunate results.

  I also saw that it is a normal problem of compatibility problems between the types of ram, but I consider that this is not the case. In addition, bad positioning of the modules is not also the case because if I put my old ram glue the computer starts normally.

  I used tape you will static isolation.

  Is the problem, a problem of compatibility between my computer and the RAM modules?

  If the RAM is damaged does these effects (do not start)?

  How can I check if the RAM modules are damaged?

  What would be your suggestions?

  I thank very you much in advance!

  Mauricio

  Hmm, I'd say you two bad sticks of RAM.  If the system POST even with them, I would swap them if you can.  We know that the RAM slots work because you have 4 x 4 sticks without any problem and your computer can take up to 32 GB of RAM.  Your admission that you bought the right kind of RAM, voltage, and speed, etc., so that shouldn't be a problem.  I would say as bad RAM.  When you do not install, just check that you make pairs in each of the colored slots, for example. matching pairs in the slot of white and black.

• Question regarding the upgrade of the FMS

  Hey,.

  We are modernizing our 5.6.2 to 5.6.3 FMS.  The manual recommended to make a backup of the FMS database.  Our UNIX based with a mysql db external system running on another machine.  Because I do not seem to have direct access to this external machine to login - I was wondering how many people bother to make this external db backup before upgrading their FMS.   I made the backup of the FMS itself, but can't seem to get connected to this computer today.

  Since the "hot spot" of the country.

  ;-o

  '

  '

  '

  THX

  "mark".

  I recommend it, but it's your comfort level if you choose to do or not.  I only got 2 upgrades failed within 5 years, I've worked with Foglight.  One of them was due to lack of disk space for the upgrade and the other has permissions issues, in both cases we set the heart of the problem and have been able to get the upgrade to always try the work successfully on a future.  This is not to say that you will not encounter issues, but generally speaking, I have not seen much.

• G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?

  Hello

  My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
  RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.

  I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.

  I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?

  Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?

  Thank you best regards &,.

  Isha

  The problem is the operating system of your laptop is 32-bit.

  A 32-bit operating system can use @ 3.25 GB installed memory.

  Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.

  As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.

  You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode.  You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.

  In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.

  If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.

• Satellite M45-S169 - overheating and the upgrade card RAM/graphics

  Hello

  I have need some answers and solace to the questions I have on my laptop. Here are the following questions:

  Laptop overheating fast enough, hereby, I mean in about 10 minutes, the laptop Burns upward. It is the model or is there something wrong with it? I can't keep the laptop without maintaining that it plugged into the wall at all times. That this has something to do with my battery like that I need a new?

  I am able to install the new RAM * (2 GB Max) and if yes, someone knows how it slots are for this model? (Not really opened to check because I'm bad to put things together after taking them apart)

  I am able to install a new graphics card for the laptop or I'm stuck with ATI RADEON XPRESS 200 M Series? (and if it is not too much to ask, is the graphics card, I have good, bad, or so - so)

  Sorry if there are too many questions, but it would be really nice if I get the answers to all these.

  Hi Honu_2,

  (1.) you should clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans and read this article please:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  2.) Yes, it seems that you need a new battery if your laptop only works with AC/DC adapter connected.

  3.), you should check your owner's manual. As far as I know this model supports up to 2 GB of RAM. This means that you can install 1 GB into the two slots.

  (4.) the graphics card upgrade is not possible because it s/set soldered on the motherboard and your laptop is designed only for the preinstalled graphics card.

  By the way: these questions are already answered here. Check out the forum for similar topics, you will find many interesting things! ;)