Regeneration in a particular cycle stop

Similar Questions

• Printer stopped working after I removed a paper jam - Deskjet 6988

  I removed a paper jam today, according to the instructions. But since I did it, it will not be printed. The power light is, as if it's OK, but he absolutely refuses to print.

  My printer is a HP Deskjet 6988 and I am on Windows 7, 64 bit.

  Whenever I try to print, the print queue displays the print job for about a second, then he faints. I try to print again, it disappears. Then, if I do it a third time, it appears in the list and stays there, but the printer does nothing.

  After two minutes the queue no longer mentions it as the "impression". Instead, it says, "error printing". I try to delete the print job, but it just sits there, saying "error printing". It will not erase. The only way to remove it is by the printer stop or restart the computer.

  If I try to print after that stuff all over again.

  I tried closing the printer and reboot, restart the computer, power cycling (stopping the printer, unplug the cables, waiting..., plug again and restart).  I ran the Diagnostic Utility and it tells me that it works very well - well, very good for a very large paperweight.  I used troubleshooting via the Control Panel, and he said: "a print job in the print queue prevents other printing of print." But as I have already said, delete the print job does not solve the problem.  I am stuck in a loop of the removal of print jobs and nothing works.

  Help, please!

  Hey Tigger,

  It may have been stuck in the diagnostic mode - not able to move forward or backward for a time very long.

  Next time, if this never happens again, you can try a Reset of the printer:

  Here are two types of reset the base printer:

  (1) if there is a keyboard, turn it off, then on and press on # and 6 (press and hold while turning on the printer).

  (2) without a keyboard?  So unplug that LEAVE unplugged for 30 seconds to a minute.  Reconnect it.  (Be careful with this one - will not shock).

  It can become a little more complicated than that, but a basic reset sometimes "will have the printer attention" if it's just "spinning" and nothing else will not physically.

  I'm glad it works again.

  Maybe printers receive loners.   The smile.

• Programmatically formatting graphic mixed signals

  I am writing an FPGA application where I am acquiring data from a unit under test (USE). The PXI-7842R digitizes 3 groups of signals:

  1. an analog voltage monitor

  2. 5 digital signals connected to the analog inputs (limitation of the pinout of the connector) and converted into Boolean values

  3. 11 digital signals connected to the digital inputs

  That's a total of 1 analog and 16 digital inputs. I want to show them on the same graph, so I used a graph of mixed signals.

  To avoid reconfiguring the graph of mixed signals, everytime I open the app, I wrote a Subvi to programmatically format the chart. I pass a reference to the graphic indicator of mixed signals and try to adapt it to look how I want. The indicator has been designed as a cluster of analog waveform 1, 2 bus waveform Digital 5 signals 1 waveforms digital bus 3 and 3 different digital waveforms. The Subvi is called inside the host VI using a statement box controlled by the 'First Call' function. Then host vi bed a U32 to the target-to-Host DMA FIFO, formats the data in the correct order and the beams while an indicator of mixed signals. During an attempt to format the chart programmatically, I get errors in property not valid which seem to depend on State. Unfortunately, the documentation of the properties seems to be quite uneven for errors I get. The Subvi attached through the following sequence:

  1. configure the shared axis and shared properties (IgnoreAttributes, ShowBusseswithLines)

  2 set up the area of tracing analog scale Y (superior plot, area 0? documentation is inconsistent on this point)

  3 set up the area of tracing digital scale (sector 1) Y?

  4. name the digital bus (3 in total, should be numbered 0-2).

  5 name the plots

  Correctly all steps 1 through 3, but I get an error when you try to set the Active Bus to 0--> ' #1077 Error, invalid property (Bus Active)»

  I tried to set the Active plot area to 1 before setting the bus, and I get the same error.

  But then sometimes if I rerun the VI host without change, the Subvi ends correctly (even if the area of the scale becomes huge and empty). The only way I can remove the errors is to set the for loops to iterate 0 times, allow the host VI run a few cycles, stop the host VI, remove the constants 0 and run again. And then there is no property errors.

  I then tried to create a constant of mixed signals with the correct sequence of the empty slots and it allows to set the MixedGraph::Value property at the beginning of the Subvi. Now error #1077 occurs at the level of the active node before Plot Bus Active node. The thing first on the definition of the constants of iteration 0 does not help when the value property is an initial value.

  Here are my questions:

  1. the ActivePlotArea property must be configured to use ActivePlots or ActiveBusses, or is that only for sizing and moving areas of land?

  2 - is ActiveBus ActivePlot to define first of all necessary to property? for example, if I have ActivePlot = 0 (for analog plot), the ActiveBus property will always fail?

  3. what else is necessary for the property ActiveBus of function call?

  4. why the Subvi is failing the first time but succeed during subsequent calls without be initialized does not yet reach every time after you initialize (except for loops are set to 0 and Subvi finishes once)?

  5. because I show a legend of the plot, I don't want the names of digital signal appears again in the scale box Y. How can I hide the names but to allow the plot area to extend completely to the legend of the plot rather than leave a large area of wasted white space?

  Hi Nick,

  The reason your Subvi does not work, it's the bus you want to change do not exist when you run.

  If you want to run this sub - VI like initializer, you must first initialize all of the plots you will be change.

  I've included a small example of how to achieve this by grouping together a constant of analog waveform with some constants of digital waveforms and food nerd in the property "value" Mixed Signal curve.

  

• VBScript to send emails on a service

  Hi all

  I was wondering, if there's a VBScript that I could use it send me an email when a particular service stops? I looked on the Net and can't really find anything.

  Basically, I have a service that works all night and will run all day, and if randomly, it hangs or stops, I want to know about this e-mail. I want that to happen automatically.

  P.s. I am a beginner in the script, so be easy on me!

  Thank you
  Damian

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://msdn.Microsoft.com/en-us/security/aa570371.aspx

• UCH12 quick-loader does not load fast

  Just bought my XZ and the fast charger UCH12 today, it took more than three hours, is responsible for 39% in full.

  What is wrong with him?

  Really quick takes XZ which 3.0?

  Glad to hear that you got your Xperia XZ

  It is perhaps also releated to the maintenance of the battery function in the phone.

  Maintenance of the battery is a device that increases the battery life. It is automatically detects when you leave your fully charged device for a long time and adapts to the speed of during this period to reduce the wear of the battery. The service will begin a regular that temporarily charge cycle stops when the battery level reaches 90%. The feature will resume then 70 minutes before the user data indicate that the battery should be fully charged and load until the battery has reached 100% load. It takes one week for the feature to learn your charge cycle at least.

  The interview of the battery is activated, you will receive a message when the battery is fully charged. Maintenance of the battery is a recommended feature that is enabled by default. You can, however, disable battery maintenance in the settings menu:

  1. On your home screen, tap the Application screen.
  2. Find and tap settings > battery > battery maintenance.
  3. Drag on to the right.

• assignment of session system variable to a dynamic repository variable obiee 11g

  Hi all

  It is possible to assign to a session system variable (: USER) in a referential dynamic variable initialization block?

  Something like below

  Select the country of DM_users where user_name = ": USER '"

  We should use NQ_SESSION. USER?

  It is possible with a session variable that is independent of the system. But we have some questions to create session variables in our environment. Any help will be much appreciated

  Thank you

  AJ

  Once again: it is not a block for a variable repository init. It is a block init for a session variable.

  If your admins have a problem with that then they better run a full review of all the variables and init blocks and see those who are garbage, who is misconfigured, who is not marked with 'performance', even though they should be postponed.

  A system is saturated with session variables does not mean you can use variables to repository instead of session ones. The scope of a variable of deposit is the same for all users. You cannot change this behavior, unless you force the BI server to cycle (stop and start) whenever a user logs on (it's a joke by the way).

• All of the controls display disabled if transformation dialog... WHY?

  Transform each.  A reasonably useful, if the minimalist dialog box disables all THE controls view.

  Including Zoom and pan.

  And of course the really useful things, like hiding boxes of delimitation and frames/edges and Guides... they also don't work.

  Why such a monochromatic and linear force in 2013?

  Adobe has spent NOT of its record profits hiring more programmers?

  Are their all scripts that move you this heinous oversight, the surplus of what... 1995?

  New: Here users can not tell you why. Illustrator is a very old and archaic program that did not follow over time. But you already know that.

  Or is there another explanation?

  There is further speculation. Mine is simply that the user base continues to tolerate. At the end of counts, that's why. If you want more explanation, read on:

  Adobe PostScript was created in the 1980s. Adobe has dominated the graphics industry since then. So people are buying Illustrator because it carries the Adobe brand. None of this has changed.

  It becomes a cycle of self-fullfilling. Newcomers buy Illustrator beginning - we're assuming that it is the "value" because it carries the Adobe brand. As a result, most Illustrator users have very little experience with any other mainstream 2D Bézier programs drawing, or not at all. Long-time Illustrator only users are becoming more acquired in its archaic interface and bulky and fearing having to apply that kind of effort in learning any other program. They - self-protection Tower - advise newcomers that it's the "professional" choice the 'value '.

  If the cycle is repeated.

  Illustrator users only together Illustrator features assume to be "cutting edge" for its category of software. Adobe marketing, of course, support this myth.

  And it follows an absurd comedy. Literal decades pass before Illustrator users realize that 'page 2' is not only possible but valuable in a drawing program. The year 2013 (and who knows how many others) comes and goes without Illustrator never acquire the most basic features of a good set of basic geometric shape tools direct. You discover this. But there is nothing new. This is the way it has always been.

  Adobe continues to market the archaic functional bases same with occasional changes than a façade of the skin of the user interface. A long feature taken granted in another Bézier drawing programs is only occasionally added and even in the case of wobbly way paralyzed by membership dedicated to an obsolete interface Foundation which Adobe does not dare to change fear that risk alienating existing users.

  The interface becomes more and more scattered, cluttered, redundant, incoherent and outdated despite its changing style façade. The confusion resulting complicated is seen by newcomers as "powerful" and "comprehensive" thinking that must be why he's so unintuitve. They come here to ask 'how' and become vested in the very esoteric learning curve.

  And the cycle repeats.

  Other suppliers try to capture or retain market share by emulating the interface schema more prevalent in the hope to facilitate the "passage" to their products. They focus more on reproducing the same features of old Illustrator on innovation, even when their interface foundations are higher. Diagram of the Illustrator interface becomes the de facto standard and overall software segment is stagnating in a never-ending cycle of 'me, too' offerings.

  Domination of the Illustrator has so effectively the entire segment in old for many decades of lethargy. Users become adicted to same old mediocrity.

  Meanwhile, other graphics in growth segments software walk on. Users of 3D modeling, for example, enjoy a multitude of patterns of interface different, each competition to ensure superior features and a superior user experience. The basis of the user assumes a position of versatility and adaptability and is less dogmatic defensive of a paticular software. Obtaining and maintaining the professional competence in several programs are considered the norm. And the category advances, become more powerful, even while becoming more affordable (growth).

  Energetic beginners devote their efforts to the development of the energy situation: platforms, scripting, data, games and mobile applications-based solutions. Open source innovates in terms of business model, if it is in terms of software functionality and provides powerful applications to nearly zero price.

  And everyone yawns during the debate of 2D drawing and "yesterday's news" appears in more archaic, more as its stagnation continues. And unfortunately continues to fail to reach its potential yet-to-be-understood.

  Finally, self-fullfilling cycles are broken. Thereafter. The last disturbance to this particular cycle comes from Adobe itself: it's the only legitimate rental license regime, which continues.

  It remains to be seen if this becomes also a trend with other software providers, or if it breaks the stranglehold of Adobe on the market. If tolerated by the user base, it becomes certainly more remunerative for the vendor (at least for a time) and who continues as customers become willingly taken trapped by dependency provider-specific. Which allows the seller to deliver a value less than the cost the same (or even less), while maintaining the same price (or even more). It is the dream of all software vendors.

  It's the dream of every situation of monopoly. It's the dream of every socialist. And it works (for once) if only enough customers are properly are suckered in there. But ultimately even walls of Berlin and long distance call rating programs down. The cost and pain of the end of the cycle of self-protection, self-perpetuating is directly proportional to how long his damage is allowed to continue. It is best to nip these cycles in the bud. But history shows that does not always happen.

  So there is no reason your "why": that's what customers buy, driven by what they buy.

  JET

• The easy listener questions

  Jin
  
  I have 10g on Windows 2003.
  
  The listener.log file gets reset / regenerated whenever the database is stopped / started?
  
  The size of my listener.log is 740 MB size. Is it very important?
  
  Under Windows, how to create a listener for the second? It is advisable to have a second listener running in case of failure of the other earpiece?
  
  Thank you, John

  user629010 wrote:
  Jin

  I have 10g on Windows 2003.

  The listener.log file gets reset / regenerated whenever the database is stopped / started?

  Any log file is a Mute . There is no intelligence to do any activity as "reset / regenerated" on the power on/off. So the answer is an absolute No.

  The size of my listener.log is 740 MB size. Is it very important?

  Depends on! If you have a size sufficient storage and won't mind a file less than 1 GB, it is not. If you are concerned about your use of the disk and do not want to keep logs of the months and months of old data are, it is great and you must cut out keeping just the data for no more than a week.

  Under Windows, how to create a listener for the second? It is advisable to have a second listener running in case of failure of the other earpiece?

  In general, No . Yet there may be counters as if you want to protect yourself from the failure of the only listener and want to have a failover of the listener , you may want to have a second earpiece. But as already said here in this thread, it is not normally necessary. To create a second listener, just fireup NETCA and create a new one on a different port and it will take care of everything.

  Thank you, John

  HTH
  Aman...

• management of special characters in the command prompt

  Hello
  I have a guest on employees who must be active in a particular cycle of the year, who is also selected by using a command prompt. Now I use a variable presentation to capture the cycle and use it in the SQL property of the guest of the employee.
  
  The problem is the cycle of value has a 'degree' symbol like "2 ° Cycle 2010" and so the guest of the employee is to throw a syntax error - [nQSError: 27002] near <>°: syntax error ".
  
  Could someone help me please in this manipulation.
  
  Thank you
  Ronnie.

  Hmmm,

  use

  SELECT "employee." "" Full name of the employee ' OF 'Customer' where 'the time '. ' {' Cycle"='@{Ciclo}{valueOf (CURRENT_CYCLE)} ' and 'objective measures. "' objectives ' > 0

  Published by: kart on June 25, 2010 14:25

• [10054] network error - after calcscript

  Hello all, I have this problem, run a maxL script.
  
  It works fine on a couple of different servers, but one in particular, it stops. The script stops after that a long calculation is complete (40 min).
  
  Useful info:
  -essbase 7.1.3 Server
  
  Any help is appreciated!
  
  Here is a part of the newspaper:
  
  [Mon Jan 25 15:14:47 2010] Info (1019018)
  Engraving for the [Database] database parameters
  
  [Mon Jan 25 15:14:47 2010] Error (1042013)
  Error network [10054]: cannot receive data

  Hi, take a look at this post he is around the same problem you are having, there are a lot of answers on the question it should give you something to go.
  Network error message

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to stop the Apple Watch finished my training in outdoor cycle automatically when I hit the break (with the intention of resuming)?

  When I use the external development of cycling in Apple Watch and I stop to use the restroom or coffee and the trip a pause, a moment later he (without any input from me) will complete the activity. It's very frustrating because I'm trying to get a new badge for most cals burned on cycling but obviously impossible training if I'm trying to break the journey at any point. If anyone else has experienced this?

  Lock your Apple Watch while you train

  You can lock your screen Apple Watch, so nothing can accidentally touch the screen, change your settings or to end your workout. Just press the screen and type Lock.

  When you want to stop your workout or make changes, firmly press the screen and press to unlock.

  Use of the workout on your Apple Watch - Apple Support

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• How to stop up to generate a waveform of the entire cycle when click on the stop button

  Dear engineer OR,.

  I have generated three AO signals to control my scanner and data acquisition. Two ramp signals is to control the galvanometric scanner (x and y). A TTL signal is to trigger the acquisition of data. Whenever I click on stop, the ramp stops every time that it is when the button is clicked, what causes a voltage jump when will resume the program again because the ramp will start in the place original (this jump of fast voltage can damage the galvanometric scanner). Could you please give me some suggestions on how to stop after only a waveform of cycle whol's over? The VI I used is attached. The FLIM control.vi is the main vi include Subvi Galvo control.vi

  Thank you very much!!

  Hello, dgql!

  From a point of view purely programming, there are a few ways you could implement this.

  (1) create a conditional stay:

  You can add features to the code such that, once you reach the stop button, the code checks the value of your signal before you actually stop the VI. In pseudo-code: "If the signal is > 0 and less than a certain value, stop." Otherwise, keep the control of signal until the value lies in this range. »

  (2) to reset the signal from the ramp at each start of your VI. This may or may not work with your application, depending on whether you must have the previous value of the ramp carried over.

  Let me know if these are of no help!

• Windows Vista downloaded update, start-up went in the update configuration but does not update, but after a minute or so stops and it's a cycle.

  Update configuration without end with 0% then stops then after configure updated again with 0% and shuts down again and it will be just a cycle... What should I do?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  http://support.Microsoft.com/kb/949358

• How to stop a particular program to always re - install on automatic updates?

  I'm running Vista 64 last month.  Windows PowerShell crashes my computer. I uninstalled and restored my computer.  I just discovered that the automatic Microsoft Download guard re - install on my computer.  I don't want this program.  How to stop that particular program to always re - install on automatic updates?

  Thank you.. .but I think I got it.  You can return to your regular lives.  :)