Registration with Web services via printer - officejet 6700 premium

Similar Questions

• Printer OfficeJet 6700 Premium - features iOS5. Cannot print from devices

  Printer OfficeJet 6700 Premium with latest firmware update as of August 25, 2012. Apple iOS devices 5, iPhone4 and iPad (v3) devices with installed AirPrint. The printer is visible and selectable from Apple devices.

  Of any one of the two devices, I select the print option and wait for the document to print. No document print devices.

  Not sure what the next step.

  Hello

  Try to bypass the temporarily from router to refuse any multicast router question:

  Click the icon on the printer wireless, and then click settings.

  Select Netowrk default settings and confirm any command prompt.

  In the menu Wireless select Radio wireless and make sure it is set to.

  IOS click settings, and then click Wi - Fi.

  Select the SSID printer include 6700 in his name.

  Allow 3 minutes for good to set the connection.

  Now, reconnect the printer to your router by entering the same wireless settings and follow the wireless configuration wizard.

  If you were able to print without similar problems, it means that the router is causing the problem.

  Unplug it for a minute and check for the difference.

  If there is no change, please specify your router brand and model.

  Kind regards

  Shlomi

• Scan to email app with printer Officejet 6700 Premium - attachment does not come through

  I'm trying to get the scan to email app with my printer to work.  I can get the printer to send to my email, but there is no attachment when it arrives.

  I tried to send to my email on my ipad (a .me account) as well as on my laptop (microsoft outlook).

  I set up two e-mails to the printer, the document goes through and says it's successful but when I open the email there is no attachment.

  I also added eprintcenter.com to my contacts.

  HELP Please!

  Everyone concerned, my answer to about scanning to email does not send an attachment is here.

  Re: Eprint Scan to e-mail - not attached SCAN:
  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/eprint-scan-to-e-mail-scan-not-attached/m-p/3180271#M45314

• Do not print Officejet 6700 Premium: Magenta, yellow and new cartridges, others do it.

  Replaced all four "setup" in new ink cartridges, they were recognized, show "full ink" on the Panel, but only cyan and black printed, yellow and magenta only. Test print on printer directly report page: same result, cyan and black are OK, yellow and magenta will not print. Any help? Bought these original cartridges again, 933XL.

  Thanks for the link/document showing how to solve my problem. I had already done most of the steps proposed but remained the problem of horizontal white streaks in magenta during Diagnostics.

  I called HP support, this time to connect to a branch in the United States,-(not supported by the 'HP' I had initially called with foreigners, answering the line who tried to get me to buy a service contract).

  HP will send a replacement magenta cartridge and I'll see if that solved the problem. Otherwise, I was told my printer is still within the warranty and will be replaced by another which has been refurbished.

  That will be fine. However, it is always frustrating to pay $42.00 for the new original HP ink cartridges, then half their levels making cleaning head printer and diagnostics on an old printer for 2 months of use.

  BTW: to all those who want a good HP assistance number: 1-800-474-6836 or 1-650-857-1501

• hp printer officejet 6700 premium e-all-in-one - h711n and mac 10.8.3

  Apparently, this printer can be installed in a mac than 10.7.

  I couldn't find a driver for a mac 10.8.3. Could someone help me to find or other which option should I

  Nice day!

  You can find the MAC driver at the bottom of the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=&LC=en&OS=219&product=5058338&sw_lang=

• OfficeJet 6700 Premium: Unable to connect to the server

  I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?

  Hey @bhigh904,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.

  When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings

  Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Officejet 6700 Premium installation problem

  I want to install everything at the time of my new printer (Officejet 6700 Premium) and after I put the ink in, I get the message «Use the cartridges configuration» supplied with your printer

  I have no installation cartridges, just the I bought - HP 932 (black) and HP 933 (colors)

  You can contact your employer to see if they have cartridges of Inbox, if they do not, please contact us in the U.S. at 1-800-474-6836 and you can order the replacement of cartridges of configuration.

• Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

  Please can someone help?

  Printer name model e-all-in-one Officejet 6700 Premium

  Firmware MPM3CN1232AR

  Software 028.000.1315.000

  Driver 09.84.00.1173

  Win 7 SP1 64 bit

  Wired ethernet connection

  Problem

  On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

  This is true for all the qualities of printing on any documents .pdf or. doc.

  I use all the HP printing paper and original cartridges.

  I aligned the print head and checks suggested on the help pages.

  I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

  They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

  The problem does not occur when scanned or copied documents are printed

  Is there a solution out there on this new printer please?

  Hi 007OHMSS,

  I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

  There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

  And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

  In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

  I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

  First turn off you will want the printer already available on the computer before you continue.

  For Win7 PC (XP is similar but not identical)

  1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
  2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
  3. Check the box "use an existing port.
  4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
  5. Now in manufacture of list on the left, select "HP".
  6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
  7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
  8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.

  9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

     10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

     11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

     12. once highlighted, select in the drop-down list ""Installed "; "

     13. When finished press apply

     14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

  15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

  I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

  So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

  So thanks to you and also to 007OHMSS who worked on this problem and original posters

  All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

  Congratulations so all round and thanks again

• OfficeJet 6700 Premium: Officejet 6700 Premium - Support for direct printing HP (Ad Hoc) wireless

  Please can someone confirm if you can set the to either ad hoc printing or using HP Officejet 6700 Premium Wireless Direct. I can't find anything in the user manual.

  The situation is that a friend has just moved into his own office with a connection high speed standard with a wireless router, in 'Serviced Offices'. These connections allow broadband to the office and he has to pay for a dial-up connection to the internet.

  So he paid for two ethernet connections which probably come out through internet gateway of the complex. However, he lost the ability to print at its 6700 HP that has been previously set up wireless. He tried to install the printer using infrastructure mode by connecting to the network without wire of the complex, but still can not access the printer. It could be that the wireless network is on a different network for LAN connections segment.

  The only solution I can think off is to let each PC with ethernet for Internet connection and install a wireless dongle in each PC to connect to the wireless printer. However, as noted above though I can't find the instructions for the Officejet 6500 to print Ad Hoc has nothing in the manual for the 6700.

  Is this possible?

  Fozzie

  ShlomiL wrote:
  

  Hello

  To clarify, the printer will support HP Wireless direct however with its latest firmware installed.

• Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

  Printer model: hp officejet 6700 premium e-all-in-one

  OS: windows xp, service pack 3

  Method of connection: network

  Description of the problem: number of page do not match

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the reports of the device"" tab.

  Then click on "check printing.

  The report provides: Total number of printed Pages 8159

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the "devices" tab

  Then click on "printer ews home page."

  Then click on the 'Tools' tab, I see:

  Total number of pages

  6725

  Difference = 8159-6725 = 1434

  Can someone tell me why these numbers are different? They represent different totals?

  MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your number of pages.  I would like to help.

  The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• CAN; t enable web service on HP Officejet Pro 8600 N911a

  N911a HP Officejet Pro 8600 that we have installed this printer as a network printer.  Everything works fine except that I can't activate the Web service to printing or scanning to an e-mail.  He says that the printer is unable to access the internet.

  Hello. Power cycle the printer and the router to see if that will clear up the error message. Do disconnect the router and then turn the printer off using the power button. Then plug the router back in and once it is up a running, turn on the printer and try to reconnect to the web services

  Then, if he is still unable to connect, I would set a static DNS on the printer. To set a static DNS, you must Access the built-in web server (EWS). Do so you by entering the IP address of the printer in the address bar of the browser of your choice.

  Once it opens your Officejet EWS, locate the tab titled 'network '. From there, look in the left column on the new page that will pop up and select IPv4, wired or wireless will depend on how the printer is connected to the network. That will bring up the page set static DNS. This will be the 2nd part of this page.

  Set the radial dial to the manual. Then, for the favorite/Primary manual DNS, set it to 8.8.8.8 and the manual Alternative/secondary to 8.8.4.4; then click on apply.
  NOTE: If another message with an option to click on 'OK' is displayed, read this message. Most of the time there is an option to cancel the change you did right and you want to avoid to click on this message. Just sail away this page by clicking on another tab.
  Power cycle the printer. Once the printer is upward and through calibrations to turn on. Try again to connect to web services by touching the icon.

• Faxes sending Officejet 6700 Premium [851648] of the control panel of the printer (form)

  I have a problem with my printer HP Officejet 6700 Premium [851648] when sending a fax using the control panael (screen) of the printer. It quickly shows me a blue screen with a power icon and a Error Code: "B82658AC". It shows a masseg tells me to turn off the printer. But when to send a fax via the HP utility program, sends it without problem. This is the first time to send a fax after the purchase of the printer. I did the Test and show me that everything is OK. My printer is connected directly to the telephone line. I just want to now how to fix this problem, thanks.

  Hello! Welcome to the @Mu96aFa forums

  I read on the fax number you are having and I personally would say the troubleshooting guide below for you. The guide check all connections fax, settings, etc..

  Can't send or receive faxes

  Also, check and update the firmware if necessary: having the latest Firmware and product updates

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see other possibilities for you, as a replacement or trade. If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada, region of: click here.

  Best wishes

• HP Officejet 6700 premium has applications in a stone printing

  I have problems printing with HP Officejet 6700 Premium.  My impression always asks on the ground by having "quequed" and I can't seem to remove the item from "quequed" if I try to print my requests.  I tried to shut down my computer and restart it, but my print request is still in status 'stone '.  When I tried to "cancel all documents print", it did not because the article is still in status 'stone' and has not been deleted.  I tried to get out all my caps that were connected to my computer and my printer and restart the computer, and concluded that the question I wanted to be removed from the print job was still in status 'stone' so I couldn't print the next job.  This is not the first time it happened, but I'm frustrated and don't know how to fix the status of 'stone' so I can use the printer to print my requests.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• HP Officejet 6700 Premium: IHP AIO Remote app does not connect to my printer.

  Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the

  the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop

  Wally

  Hello @wwwally, greetings!

  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.

  I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to http://hp.care/2bUVkrw to download and install HP Scan and capture the app.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Tips for creating an application with web services please?

  I created a simple application for a client who interacts / monitors a device VISA with LV 2009.  The architecture is essentially a state machine with a timeout for VISA calls that retrieve the current state.

  The client asked that the app will also be controlled via the web and asked me to set up a demo with one or two simple functions.  I have the experience to bring charges against the Server Web LV7 model, but not with web services.

  So here's what I did...

  (1) added a line to my application that would inject actions in the state machine.

  (2) created a simple VI pushes these actions in the queue and plans to use it as the Web Service.

  And then I followed the examples for Web Services, thinking that the Web server is running in the same program as the development environment, such as the version LV7.  This doesn't seem to work.

  Could someone give me a quick overview on how best to do that, or to report an article?  I have simple working WS, but here are a few questions...

  @ Jed Davidow:

  We met this difficulty with our web app (LV 2009) as well.  Because now we feel the solution the easiest way is to activate the VI server in your main application (EXE) VI and place calls to its hierarchy of web services in the open Application > VI Open > call by Ref > close VI > structure to close the Application.

  Although we try to minimize the use of the present in web services, it makes sense for some resources shared and accessible throughout the world as references to database, configuration globals, etc.

  I also note that there seems to be an instability that we have not been able to identify which may (or not) be attributed to the use of this technique.  The symptom is LabVIEW from memory immediately at some point.

  I am currently looking into migration towards 2010 LV, and it seems that the same constraints between instances of the application are in place.  I expect that, but I was expecting some more simplified with the next version of LV interprocess communication methods.

  --

  James