Reinstall optiarc DVD/CD drive on PC XPS
Roxio forced uninstall me my optiarc cd/dvd device, I can't locate to re - install... Thank you very much!
Hi KATY,.
Why are there Roxio required that you uninstall the DVD/CD-ROM optiarc?
You can read the following article and try to run the Fixit of material and check if it helps.
Hardware devices do not work or are not detected in Windows
Tags: Windows
Similar Questions
-
Adding a DVD - RW drive for a XPS 8700.
I just bought an XPS 8700 provided with Windows 7 (my choice) and one disc of 12 x DVD - RW. This machine replaces a decade old Dimension 8400. I want to add a second DVD disc to avoid the shuffle of disk by making copies.
The last time I did was when they were still using old PATA drives where the drive data cable was the old ribbon cable and you used a splitter to the power cable.
I have never installed a SATA drive so I have a few questions. When I order my second drive, what wires I need to complete the installation - or is all the wiring already in the computer?
One last question is the format used in the 8700 XPS and how to remove the coup de grace in the drive Bay?
Thanks for any advice - Tom
TomHF
You need to buy a DVD/RW SATA drive 5.25 "similar on the drive shown here:
http://www.Newegg.com/product/product.aspx?item=N82E16827106289
A data SATA 18 "cable is necessary, there should be a spare cable/power connector SATA inside of the case for a second optical drive.
One end of the SATA data cable is connected to the optical drive and the other to a SATA connector located on the motherboard [page 13].
Two 6-32 X 1/4 screws are necessary to install the drive in the Bay.
The installation procedures of the player can be found here:
Greetings to "how to remove the coup de grace in the Bay.
You can use the same instructions as given for the hard disk, on page 42.
Bev.
-
Need help!
Recently bought a laptop Dell Inspiron 1525 using the Vista operating system.
The DVD + RW device worked but recently failed.
Device Manager found the driver who is Optiarc DVD +-RW AD 7580 A ATA Device
Device Manager is a (-) marker that tells me that the driver does not work.
I tried to update the driver but the message received is "already installed the latest driver.
I wanted to uninstall driver and rebooted the system.
On reboot, the system attempted to reinstall the driver for my CD ROM
I then received message 'disk device software was not successfully installed ".
Also received message "Windows cannot load the device of this material. Code 39 "
At the present time, my CD-ROM device does not work.
I would appreciate anyone who has a solution to this problem.
Thank you in advance.Have you recently installed a new burner software? Several of installs it burner can cause error 39. You can rightclick this link to another thread of responses on the deletion entries "Upper filters" and 'down '. You can remove those creating the CMD file I'll paste it in below, created by William Keener.
- Copy carefully and then paste the following three commands in Notepad:
Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\CDFiltersBackup.reg
reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v- Save the file to your desktop as DeleteCDFilters.cmd.
- Right click on the DeleteCDFilters.cmd file to your desktop, and then click run as administrator.
Note After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom filter of CD/DVD drivers by double-clicking on the CDFiltersBackup.reg that the command script exports to your desktop.
(Soon we will see a button "FixIt4Me" of his team to do this automatically.)Mark L. Ferguson MS - MVP
-
driver problem Optiarc dvd rw ad - 7561 s ata device
Dear Sir.
Recently, I buy a compaq presario CQ61-115EE before Laptop.Twodays I was watching the movie by the player. After that, I loaded panasonoic camera digital cd software tried to install in my laptop, because installed everything except fast player and at that moment, I uninstalled all programs related to the software of panasonic. On this day evenining I'm watching the movie again via a system drive, but is not running. So I went to the cotrolpanel Device Manager. In that I crossed optiac dvd rw file and observed in driver Panel. In this appearance, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. And I tried to update via internet but showing only already updated file is in the laptop.My LAPTOP is compaq presario CQ61-115EE with windows vista Home premium service Pack 2.
Optiarc DVD RW AD-7561 ATA DevicePlease help me solve this problem.
Thank youvsrao
Engineer (execution of piping)
MuscatMuscat vsrao
Hello Valerio srinivasa rao,
Have you tried to uninstall your optical drive through the Device Manager and restart your computer? If this isn't the case, you should do it. Otherwise, have you tried this miracle solution?
Link:
http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computerprior to this fix. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be that the drive is dusty
(goal) or bad. Hope this helps you. Let us know anyway. Make it a great day!
"In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not
Hi guys,.
My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not
Its not reading any cds/DVDs.
Please could you help me how to fix it
Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.
Mine is under WIndows Vista SP2
I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.
Please someone help me how to solve this problem.
Thanks in advance.
Kind regards
Rambeau
++
@bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.
You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)
-
Need driver for Optiarc DVD RW AD 7580 s drive for Windows Vista 64-bit
I just bought a new Lenovo Ideapad Y550's.
Everything works well except the drive Optiarc DVD RW AD 7580 s. I checked the configuration of the pilot and found that a file system 32 called cdrom.sys driver has been installed.
What is the correct driver for a 64-bit Vista system? In a few weeks, I'll move from Vista to Windows 7. Will it then a new driver?
Where will I get the right driver for my 64 bit Vista system?
Help, please.
Well, I took it to the center of service, and in about five minutes, they put it right.
Asked about this, they said that it was a problem with the 'settings '. They did not specify.
Now, everything's fine.
-
Aspire 5741 driver Optiarc DVD RW AD - 7585H
My Aspire 5741 with Windows 7 DVD player no longer works and I see in Device Manager there is a problem with the driver. I'm dissolving device as someone had suggested ndo rebooted but he has been unable to reinstall the driver.
I tried to locate the driver for him on the Acer Support website, but it is not listed. Why ACER does not provide the driver. In my view, this dvd player is manufactured by Sony, but their web site says to get the correct driver from the manufacturer of the product which is in this case Acer.
He '; s frustrating when they list a lot of other drivers, but not the dvd player.
I'd appreciate the help. Thank you.
Hello...
Before you remove and reinstall the device CD drive, you can remove the filter upper and lower registry to resolve the problem.
Click Start, then select run.
Type regedit in the run dialog box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow
- In the navigation pane, find and then click the following registry subkey:
-
device driver was not installed optiarc DVD RW AD 7581 ATA device
Graduated fron windows vista home premiun, Ultimate and optiarc dvd rw ad-7581 ata device will not work. How can I fix it?
Hello
Check with the Maker system and/or the manufacturer support and Forums real player
(if any). There is no reason for the reader who has worked on Vista HP does not play
on Vista Ultimate.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Problem with Optiarc DVD Drive
My DVD drive is an Optiarc DVD RW AD - 7203A ATA Device. I have this message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». How can I solve using the Windows registry?
Hello
Try the microsoft 'fix - it' for your problem below
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
and read this information too
-
Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem
Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?
The DVD player worked before HARD drive went bad now, it won't work.
And I just replaced the HARD drive, but now cannot load an operating system that he...
Help, please...
Hi dynamitenews
1. are you able to boot to the desktop?
2. what happens when you try to start the computer?You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.
Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questionsIf nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
BIOS WARNING-
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.I hope this helps.
-
After the upgrade to Windows XP Pro to Windows 7 Ultimate on my laptop Dell Vostro 1500, the Optiarc AD-5560 DVD +-RW drive doesn't recognize DVD-R media. I tried to burn a DVD of the musical of my daughter using create DVD Windows to find that player whirred and sputter before it me a disc unrocognizable the notification. After trying several different and even during running brands in store for an additional brand, it is clear that the player does not play well. I also tried:
> Thanks to the system of solving the problems in Windows 7 which asked me to insert a valid disc type.
> Tried other formats (DVD + R, RW, etc.) which he acknowledged immediately
> Prayed to Almighty God to fixI don't have these problems with XP people. Help, please!
Hi jtclements,
Find the following article, with a few good troubleshooting steps:
http://support.Microsoft.com/kb/314060
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Optiarc DVD RW AD7710H driver does not install
Separated from this thread.
I have exactly the same problem with my Optiarc DVD AD-7710 on Sony laptop and I also uninstall and sought changes to the equipment and the updated driver to update, but unfortunately the problem was not solved at all. The problem started recently without doing anything. Seems that some update in the operating system or the driver caused this problem to be happen. Material to DVD does not have no problem because I can boot my laptop with kaspersky rescue CD and then I see the content of the CD but when windows 7 is driver problem happen.
Please help me if any body has resolved the problem.
I did what you said above (all points) but the problem was not solved, fortunately the problem was solved by downloading Microsoft DVD fix tool "MicrosoftFixit.dvd.MATSKB.Run.exe" and run it.
Please say the same for others who has the same problem.
-
Optiarc dvd rw ad 7280 s ata device has a driver problem
"" How can I solve this problem of pilot-"optiarc dvd rw ad 7280 s ata device has a driver problem" and error 19
I am using windows 7 Home Edition
The does'nt of the computer recognizes the optical device
How can I SOLVE this
E-mail address is removed from the privacy *.
Thank you
Hello.
-Run these attach the.
http://support.Microsoft.com/kb/316529/
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
-
Original title: dvd player
recently replaced HDD and reintegrated windows 7. Now my dvd player cannot play a bluray disc. Any ideas how to solve this problem?
Duplicate the content of the thread:
After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc
My hard drive recently broken and we replaced and reinstalled windows7. Now I'm watching a Bluray DVD and the drive will not read it. I tried the fix auto and that said they detected a problem but can not fix this. Any ideas?
Hello
You can check these links and try...
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
-
HelloWith the help of the window - 8 installed on newly purchased Dell Inspiron notebookFor a few days, I wasn't able to use my CD DVD drive because there is a driver problem, here's the trouble shoot reportcould someone help me how this issue be resolvedTSSTcorp DVD +-RW Drive SN - 208BB has a driver problem fixed is not fixedThere is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. The driver must be reinstalled.Information InformationalDeviceName: TSSTcorp DVD +-RW Drive SN-208BBID: SCSI\CDROM & VEN_TSSTCORP & PROD_DVD +-RW_SN-208BB\4 & BB94CF & 0 & 040000Error code: 19Reinstall the complete device driverThere is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. Reinstall the driver may resolve this issue.
You can check the following registry key? :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?
If so, for UpperFilters and LowerFilters, value which is listed under "data"?
Maybe you are looking for
-
Trouble with Touch ID when you want to put one, it says that it does not recognize the finger
Trouble with my ID touch, when I want to configure it says it cannot recognize my finger
-
Cannot install Windows Update - 8024AFF error Code
original title: 8024AFF error Code Hi, I can not install updates on Windows Vista. I get the message Error Code 8024AFF. Can anyone help? Thank you!
-
Keyboard layout has changed. Symbol and the number of keys do not work properly.
my friend borrowed my computer and then I came home and tried to send someone. When I type I can't get the shift to capitalize the letters or the numeric keys to make an exclamtion, or the sign or dollar etc... can you help me.
-
Dell Studio XPS 1647 speakers not working not
Hello, on my Studio XPS 1647 speakers suddenly stopped working. I started it yesterday to the top and there is no sound. Speakers they are silent, but will not reactivate. I downloaded the latest driver and have had no luck even after several reboots
-
11.1.2.3 configuration maintenance for Standalone Essbase
Hello gurus,We strive to apply 11.1.2.3 patching on Standalone Essbase 11.1.2.2.Here, we wanted to confirm as to how the EMP Configurator must be launched to the configuration of the components of the EMP?Should I run Setup using -forceRegistry comma