Reloading CS3 on Windows XP from the disk

Similar Questions

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Download black screen during installation of Windows 7 from the disk.

  Original title: loading Windows 7 with windows 8 is already installed

  Dell computer brand new.  (Terrible dealer. They charge $ for help on something other than the material.)  The new computer comes with windows 8 is installed.

  Like any windows 8.  Ordinate of windows 7.  They sent the disc and no key.

  Dell will not help with installation unless you pay them $!  They say that it's a Microsoft product, and they are not obliged to help, even if it was purchased from them!  It's like buying a new washing machine or a car.  You need to contact the manufacture to get help with it?

  No, you communicate with the store, it was purchased from.  This applies to any new product I know. But not with Dell!

  Sorry for the rant.  I just found this totally outrageous situation.

  MY PROBLEM:

  Installing windows 7 from the drive, they sent.  Ten minutes into it the screen goes all black.  It is said that there is a file on the disk.  Also a button to continue.

  I stopped the installation and am at a loss as what to do...

  Thank you, Al

  Hello

  Have you checked to see if your model computer has Windows 7 drivers available from Dell for it?

  If not, it will not install properly or work properly.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  ___________________________________

  Have you changed the order of startup and boot the Windows 7 disc, they sent you?

  You press F12 in a Dell to change the Boot order

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19500812.aspx

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  ____________________________________

  Or ask Dell to replace the disc if it is faulty.

  ____________________________________

  Or download the correct ISO file and make your own drive and use the product key that is on the sticker COST Dell sent you.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• Bootcamp - Windows 10 should not see or read files from the disk HARD Apple intern.

  I have just successfully Windows 10 next OS X on my 15 "Macbook Pro mid-2014.

  Windows 10 should not see or read files from the disk HARD Apple intern.

  Should which driver I uninstall?

  On OSX, if the following Terminal command produces any output, then you cannot read partition OSX on the side Windows? FileVault2 will also disable access to the OSX partition.

  Cs diskutil list

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• If I have to start windows from the disk to do a repair, I lose all my data backed up?

  Computer will not complete boot. Happens to the black screen with green progress bar and stay there. The computer invites me to start from the windows disk. However, if I have to start windows from the disk to do a repair, I lose all my data backed up? Thank you.

  Computer will not complete boot. Happens to the black screen with green progress bar and stay there. The computer invites me to start from the windows disk. However, if I have to start windows from the disk to do a repair, I lose all my data backed up? Thank you.

  Hello

  in Vista, if using a Microsoft Vista DVD(NOT a Manufacturers recovery Disk), the "boot" disk repair process, you ask about, it's only a "Startup Repair", not a repair of the operating system installation; population

  You must have an operational Vista operating system to do a repair installation of the files using a Microsoft DVD of Vista system

  BUT, if the use and start from a manufacturers recovery disk, which guest from the disk is likely to reinstall the OS and lose all your data

  Please explain with more information

• How to uninstall Windows 7 from the recovery disk?

  By mistake, I installed Windows 7 on the recovery disk. I have only windows 7 installed on my Dell Inspiron. However, it is now a multi-boot, as Windows 7 is stored on the operating system and the recovery drive. How delete/uninstall Windows 7 from the recovery drive (more free space on it is exhausted). I already tried to 'Format' and 'Remove the Volume' in the disk management page, but the options are grayed out and I can't access it.

  It's probably that you managed to install on the Dell recovery disk victory because it would be too small.

  Open the recovery partition in Explorer to view the files.

  Use msconfig to remove incorrect boot entry

• Windows vista USB flash drive installation AND recover the WINDOWS KEY from the recovery disk

  Hi all

  I formatted my laptop some time ago. Now I want to reinstall windows vista (came along with my laptop). The thing is due to a problem that my CD drive does not work so I would like to install windows vista by using a USB key. Can you get it someone please let me know if this is possible... If Yes, how I've go ahead make a bootable USB.

  As someone can tell me if there is a way to retrieve the WINDOWS KEY from the recovery disc.

  Thank you.

  Hello

  This can help, but you will need a Vista system to create the working bootable USB key:http://www.askvg.com/how-to-create-bootable-usb-drive-to-install-windows-vista/

  As for the product key, it should be on a sticker on the laptop (usually on the bottom). If it is not readable, contact the manufacturer for further assistance. As we said already, the product key is not on the installation disc.

  Replace broken laptop optical drives is not too difficult, you can see this as another option.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I downloaded Windows XP from the Windows Service Center. It is an exe file. How can I extract this to a disc and burn I can install it?

  I downloaded Windows XP from the Windows Service Center. It's a .exe. When I click on it, it is extracted to a folder I called "xp". How can I obtain these data on a disk to install XP from a CD? Should what steps I take? I am running Windows 7.

  original title: Burning a disk XP

  Putting aside if the 64-bit version of XP is what you need, when you ran the exe, the file that was extracted (i.e., in the folder named "xp") should have been an ISO file.

  Files ISO are CD images and are intended to be burned (NOT copied) to a writable CD.

  Assuming that you have the correct hardware (CD burner), you can burn your ISO as described here: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-from-an-ISO-file

  Note that what you downloaded is NOT "Windows XP Mode" which is available for use with Windows 7 Professional, enterprise or ultimate edition.  The image you uploaded is for installation on a separate computer (or in a dual-boot configuration) - assuming you have the required license keys.

• Code product key? had reboot my computer and I need a code for Windows Vista from the bottom of my laptop

  Hi, I'm having a problem with my laptop. I bought my laptop online, a year ago, and I got a virus. Then, I had my computer reset and I need a code for Windows Vista from the bottom of my laptop. After looking through records and information, we found that he had no number. He worked initially but then recently he was asked for a product key or something of the sort code. I was using my laptop but I cannot customise my background etc.

  Can you help me?

  Thank you very much

  The code is located on a label and is a 25-digit alpha-numeric (and very hard to read) code separated into 5 groups of 5 numbers separated by dashes.  If you can't find it on the bottom of your laptop, open the battery housing and remove the battery and look there - I know of cases where this is where it was placed.

  If you can't find the product key, your only choice is to contact the manufacturer and see if they can help.  Sometimes the relocations made with recovery disks don't need to be activated (depends on the manufacturer and their recovery process must ask them and confirm before you spend money on the recovery discs).  A valid product key is required for activation if activation is required - there is no way around this problem.  And in case you are considering on it, you can't switch from one product not enabled - you need to do a clean and complete installation (update disc will not work).

  I hope this helps and that the manufacturer can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Recover windows 8 from the windows.old folder

  Hello

  I'm trying to recover windows 8 from the windows.old folder, but no luck yet. I upgraded my system to winodws8.1 and I can see that there is a windows.old folder.

  Therefore, a way to return to previous windows, if someone has forgotten to do disk recovery or restore point.

  I tried the steps of the back roller by copying the files and then recovered the boot sector, I get the two installation after that but does not work.

  is there someone who can explain to me step by step.

  Here is the link where I got the idea, but he should know more...

  http://support.Microsoft.com/kb/971760

  Thank you

  SIMER

  Hello Simer,

  Thanks for posting your question on the forum of the Microsoft community.

  I suggest you try the steps in this article and check if it helps.
  Reference:
  Retrieve files from the Windows.old folder
  http://Windows.Microsoft.com/en-in/Windows-8/restore-files-upgrade-Windows-old

  You can also run system file checker (SFC).

  Refer to this article:

  Use the System File Checker tool to repair missing or corrupted system files

  https://support.Microsoft.com/kb/929833/en-us

  Note: It can ask the difficulty Windows Installation DVD and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Hello

  I have 2 laptops Toshiba, Qosmio X 300 - 14U and Satellite T130 - 12 K, and my question is:
  I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Thanks in advance

  Hi frakri,

  What drivers tell you exactly? Display, chipset, sound, etc. ?

  Theoretically, it should be possible, but it s according to the material. For example if your Qosmio has the same chipset as satellite you can use these drivers. Otherwise it wouldn't work because the hardware is different.
  First, check the features!

  In addition, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• My DVD Maker 2 will not install the driver from the disk

  I recently bought a DVD Maker 2, but cannot load it the driver from the disk... Please notify that I searched for hours on the Internet for the free down load for my legacy but no luck, please advise...

  Hi L.A. Hastie,.

  ·         What version of the operating system is installed on the computer?

  I suggest to contact the manufacturer or check with the place where you bought the DVD maker for more information and help.

• reuse the license of Windows XP from the old office to the new office

  We have 4 old desktop computers with windows xp I want to reuse the license of Windows XP from the old office to the new office

  I bought a HP desktop computer and dell preinstalled with Windows XP. The office has not worked for a few years, he has the processor are P4 and slow work.

  I recently bought a desktop computer and wanted to know can I use the same license key to get Windows XP installed on my new desktop computer.

  Note: I have lost my original installation of windows CD but have the office and Windows XP product code is available to me.

  The old HP desktop and dell came with a license with the sticker on the side.

  Any PC which came with a sticker with a key to activate product on it has a license that is related to this PC (and only this PC) for ever. It is not legal to install on a PC using the key videos from another PC.

  If the PC you want to install XP on still has its sticker, then as much as you have a compatible installation XP CD, XP can be re-installed using the key on the sticker.

  Only commercial versions of XP can be moved from one PC to another. With the commercial versions, the activation key came with the media, not on a label stuck on the PC.

• white background for hours during the installation of windows 7 from the dvd hp system recovery

  I own a dv7 - 3186cl and recently bought a new hard drive to replace the damaged one.  When I go to install windows 7 from the recovery of the system DVD purchased by hp, it loads a blank screen background image and stays there.

  I had kept it slowed down on it for about 6 hours now.  The mouse still moves, but nothing has changed.

  I ran Diagnostics on the computer before this point and he passed all the tests.

  Someone help me please... I have no idea what to do

  Please reinitate the recovery process. Please remove all other devices connected to the laptop. Here is the link that has the steps:

  http://support.HP.com/us-en/document/c01895783