Remote systems missing - followed by another post

Similar Questions

• View files and directories on a remote system (RIO) on a host (PC)

  Hello

  Please assume that we discuss software based on the example of standard project "Labview FPGA control on Compact RIO." The host is an initiation LV14 ongoing fall of running PC, the remote system is a sbRIO-9636 having a USB HDD and SD card. The objective is the control of the process. The control process is not relevant to the question.

  That question is on the implementation of the following functionality: the user operates a host running a user Labview vi (UI Main.vi) the interface locally on the host computer. Part of this vi should offer the user built in dialogue (some express vi or another) or custom dialog (a vi to measure on request). The dialogue should display the directories and files on the remote system that is running RT Main.vi and it must allow the user to select a single XML file on the remote system (which contains generic configuration information). The file name is passed then to the remote system and the remote system will act to open and fill out a few configuration variables.

  I'm sure that a widely used solution exists for this problem but I have not found the right words to type in my favorite search engine and yet to produce the result. I propose the following:

  (1) the user clicks on a button "select config file" Main.vi UI

  (2) the place of event loop UI Main.vi a message on the main message queue of the UI based on the event value caused by the modifier key

  (3) the UI Main.vi enqueues message loop a separate message on the stream from the network "user interface control flow '.

  (4) the Main.vi RT, RT loop - UI Commands.vi Subvi receives the message from the stream and places it on the message Main.vi RT queue

  (5) the message Main.vi RT loop performs some functions to read disk, directories and filenames of the RT system structures

  (6) name of file and directory (5) data are converted to a variant and went with an appropriate message in the network of RT writer stream

  (7) the Main.vi UI periodically reads the stream network of RT writer (it's in the 'monitoring loop') and place the message received (6) in the queue of messages in the user interface

  (8) the message queue of the user interface main filled the main façade of the UI with the data

  (9) the user selects the directory and the file they want and click on an ok"" button.

  (10) the causes of button click ok the event loop of the main UI to place a message in the queue of messages of UI Main.vi due to the expectancy value change on the ok button

  (11) the places UI Message Loop a message on the stream from the network "User interface control flow" with the selected file name of the selected file as the data (stored as Variant)

  (12) the RT Main.vi, RT loop - UI Commands.vi Subvi receives the message from the stream and places it on the message Main.vi RT queue

  (13) the RT Main.vi message loop opens the XML file and populated the appropriate variables with the configuration options that are there.

  The user must be able to cancel the dialog and avoid using a configuration file, but I have not delt with it here.

  Now for the questions:

  (1) is this a logical approach?

  (2) are there any suggestions for a better way?

  (3) all links to pre-written code that will allow to me impliment all or a part of this with minimal effort (I am referring to dialog bit rather than the forest of streams and events network as these structures still exist and have a lot of custom code in them)?

  Thank you

  James

  I do something like that, but as the interaction of the user on the host, I keep the Configuration files also on the host.  This saves a few steps:

  • Host opens VI of dialogue saying "Choose Configuration file", pointing to the location designated on the host.
  • The user selects a Configuration file.
  • Host bed data packets to send to remote files.
  • The host sends Message 'Configuration' with the previous step Configuration data remotely.
  • Remote control receives the message and any Configuration configures automatically, possibly to send message 'I'm Ready' return home.

  All I/o file consists of the host, and only a single host remote message must be sent.

  Bob Schor

• Satellite A75 - config\system missing or damaged

  A month ago I successfully restored all the settings from the factory with the recovery cd for my satellite A75.
  Everything was working well until yesterday, I have received the \windows\system32\config\system missing or damaged.

  My laptop can not read the cd factory restore.
  What I do next. ?

  Another laptop home bed recovery cd I am comfortable that the CD is fine.

  Should my hard drive be replaced?

  Hello

  > Another laptop home bed recovery cd I am comfortable that the CD is fine.
  Seems the CD/DVD drive cannot handle the recovery disk I m not very well why, but you can try to copy this disc (burn on another drive) and then try to use the copied disc in order to restore the operating system.

  In many cases, this could help.

• readings of Veristand instruments with a remote system

  I'm new to the National Instruments and Veristand material and I'm trying to use an instrument with Veristand to see if I can get readings of this instrument. I use a PC with Windows Vista and I am connected via a network to a PXI-8108 controller in a PXI-1050 chasiss chassis. The instrument is just a thermocouple which I use to become familiar with everything. The thermocouple is connected and the connection SCB-68 block which is connected to a PXI-6221 multifunction data acquisition in the chassis. I am able to create a task in MAX under remote system and everything seems to work. What I want to do is to get the readings in Veristand, and I don't know if I need to create a custom device that is related to the acquisition of data somehow, or if there is another way to do it. I created the DAQ hardware in the system Explorer, but I see no way to link the real DAQ hardware on the remote system. I wonder if anyone can help with this.

  All advice is appreciated.

  Thank you

  You can read the value of your thermocouple directly from VeriStand channel, but the process is different than using MAX.

  In the system Explorer, add your DAQ hardware that is wired to your SCB-68. Make sure that you specify the same name (i.e. ' Dev1'), which is the make up something, you also that you have imported the peripheral canal which hangs to the thermocouple (i.e. "ai0"). There is no way in System Explorer to specify that this channel should be scaling of thermocouple. VeriStand initially served this string value value brute power. However, you can set the limit high and low for this channel to something small as +/-1V, since thermocouples have very small readings.

  You add the balance to your system separately after the deployment of the system definition, you have created the target of RT. For this to connect to the target using the workspace and select the tool to the workspace on the Tools menu called channel scaling and Calibration Manager.

  In this dialog box, you will see your TV listed DAQ. Navigate in the dialog box assign an appropriate scale of thermocouple to your channel. Once this is done, the target will remember the scale for this channel until what crush you.

  I would like to know how it goes...

• VISA does not recognize the remote system max

  I tried to configure the instrument cards in a chassis SMU, and I'm unable to get a VISA to recognize.  Reading some other posts related to names of resources VISA, I found that you should be able to drag and drop devices Max NOR in a Labview diagram, and it will automatically create a resource VISA for device control.  I am able to do that the name for the devices installed on "My System" (COM1 for example), but when I try to do 'Remote system', a few drops in a block of text.  If I try to create a resource VISA directly control, the drop down menu displays only the devices on my system.  I even tried to change the VISA category for the control.  Still not get visa to recognize the remote devices.  Please notify.

  Working with Labview 2012 SP1 f5

  PXI chassis, 1082

  Controller OR SMU 8133

  VISA 5.4 installed on PC

  VISA 5.4 installed on the controller

  The firewall is disabled for the NIC in chassis

  Thank you

  GSinMN

  http://digital.NI.com/public.nsf/allkb/F3AB0B5D7DBA367C86257982005BBF2C

• How to replace Labview RT10.0 with RT8.2 on the remote system?

  LabVIEW RT10.0 is installed on our new PXI-e8133 controller. Our host is running Labview RT8.2. That's why I'm unable to download and run a VI from the host to the remote system.

  I want to download RT8.2 between the host and the target (so replacing/removing RT10.0 on the remote system). On another controller, we could choose the 'old' RT8.2 by download to MAX (which replaces the latest version). This is not an option with the new controller. Add/Remove software MAX, available versions of RT on the host is 'none' (even if RT8.2 is listed under the software on my system).

  How to install RT8.2 on the remote system? I have to completely remove RT10.0 first of the remote system?

  Thank you!

  Unfortunately, the minimum Version of the compatible LabVIEW RT for the PXI-e 8133 is 2010. This means that you must either upgrade to LV2010 or choose another controller.

  Kind regards

  David Ashlocke

  Technical sales engineer

  National Instruments

• Remote system disconnected after having installed MAX 4.7.3

  Hello!

  This topic is related to the question which you can find here.

  In order to fix the problem of locale on Windows (XP in my case), I used the update to 1.1.3 System Configuration and it seems to work. I changed the locale to my local and installed the update. Silverlight goes not down, so what is fixed. However, this created a new problem:

  Now my status from remote devices (1742 - NOR and NOR-1746) is always "offline". The devices are connected to a different subnet to the development computer. Rattling of their IPs have shown that they are there. I can connect to the camera using the project in real time. However, in MAX remote system status remains 'disconnected '. I tried to delete and recreate MAX devices, but that doesn't work anymore.

  I also tried it with the Windows Firewall, power on and off and updated software with NI Update Service. On another computer, which did not have the update yet, I can connect to and modify the devices.

  In addition, I completely reinstalled the development system, but the problem persists.

  Kind regards

  Mart

  
  

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• windows\system32\config\system missing or corrupted display.

  I was remove two conflicting security, CA & Ad-Aware programs.  Everything worked great until I rebooted.  Then the black the Windows\system32\config\system missing or damaged screen appeared.  Is there a way to recover my data and restore my computer without the disk restor?

  Provide information on your system, the better you can:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Let me start with this: (never start with KB307545)

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• remote systems

  How can I configure the values of the bios on remote systems with Dell customer the PowerShell (http://en.community.dell.com/techcenter/enterprise-client/w/wiki/6901.dell-client-powershell-provider.aspx) provider?

  Retok,

  You can always install only HAPI individually using the HAPI_X86_64.zipx file in the folder of the PowerShell Beta.

  Steps are given in the Readme.txt as well.

  Please follow the steps below to install the driver HAPPY
  -Unzip the HAPI_X86 (*) (32/64 bit Arch) .zipx file in your working folder.
  -Open a command with administrator privileges prompt and navigate to your working folder.
  -Run HAPIInstall.bat in the folder HAPI. This should install it driver HAPPY.
  -Run 'Driverquery v' on the same command line and check if the "dcdbas" is visible since the
  list.
  -If dcdbas is visible, then the driver installation is successful.

  Share us your comments, please.

  OMCI is also fixing all the unwanted monitor in the next version.

• I want to uninstall the Acribat XI of the present system and reinstall in another. What is the procedure?

  I want to uninstall the Acribat XI of the present system and reinstall in another. What is the procedure?

  Hello

  Please follow the steps below to uninstall Acrobat XI:

  WINDOWS:

  Control Panel > programs and features > uninstall a program > right click on Acrobat XI and UNINSTALL

  MAC:

  Finder > Applications > utilities > Adobe Installers > Acrobat XI - double click to UNINSTALL

  Or see Uninstall or remove Adobe Creative Cloud applications

  Download it again here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Let us know if that helps.

  Kind regards

  Bani

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Panel Test DAQ opened on the remote system

  Using the command-line tool nidmfpan.exe you open a test panel to a device on your system by specifying its name.  Here is an article which he described.

  http://digital.NI.com/public.nsf/allkb/9B628A8B1B13136F86256DDB0004DE4D

  But what is not mentioned is how to call this function if it will open a panel of test on a RT system.  This is possible because in MAX, you can select the hardware and the same test panel is displayed, but I don't know the right way to call this EXE, so it will open it.  Is there any place that command line switches are documented for this program?  And what is the method for opening a panel of test on a piece of DAQ hardware on a remote system?  Thank you.

  Since nobody has been able to help me I thought about it myself.  If you call the application nidmfpan.exe with the command line switch send_break_action: with the IP address of the remote system it works great.  I also found you can use the/dev: instead of the /devid: to specify the device by a unique identifier instead of the alias MAX.  Thus, for example:

  C:\Windows\SysWOW64\nidmfpan.exe /host:192.168.129.1/dev: {84535FB2-8F2A-11E6-8061-00802F25AF78}

  Or

  C:\Windows\SysWOW64\nidmfpan.exe /host:192.168.129.1 /devid:cDAQ1Mod2

• How a cRIO can access remote systems VISA resources?

  I have a NI 9871 RS485 module on an ethernet 9148 RIO.

  I have also a laptop and a cRIO 9073.

  I can access each of the 9871 serial ports on the computer but not the 9073.

  When you try to access it from the cRIO, I get error:-1073807192, VISA: (Hex 0xBFFF00A8) is denied access to the resource or to the remote machine. This is due to the lack of sufficient privileges for the current user or the machine.

  How the cRIO can access the serial ports of the module 9871 on the ethernetRIO?

  Or how a remote access cRIO visa resources?

  Or how a cRIO can have sufficient privileges to access remote resources from visa?

  Thank you for your help.

  LabVIEW 2010 & VISA 5.1 on pc

  NOR-RIO 4.0 and 5.1 VISA & NI 9871 SERIES scan engine support on cRIO and eRIO

  Hi Woss,

  It is possible that your RIO Ethernet has some parameters of active access which is to prohibit the connection to serial ports.  You can change these settings in a position and Automation Explorer (MAX) for your device by going to the device under remote systems, expanding the category of software under it and choosing NI-VISA.  There will be a tab in the right pane of MAX called Options of VISA.  In this tab, select Server VISA > security to access these settings.

  From there, you should be able to add the IP address of the RIO device that needs to access the VISA on the RIO Ethernet server.  Once you have changed these settings, just click on register at the top of the window and allow the unit to restart.  Let me know if that helps!

• None of the remote systems are found in Max in VMware

  I started using virtual machines and I don't see any remote systems listed in MAX within the virtual machine, but I see the remote system on my real machine. It is not a big problem because I can always run my code and connect to the target of RT of the project within the virtual machine, but when I need to look at MAX it would be nice to not switch back between my VM and the computer. I wonder that if it is behavior, others have noticed, or is - it possible my MAX database is corrupted? The section of the entire remote systems doesn't fail, just no hardware found and listed under it when I update. I wonder if this is a problem with how the virtual machine sets up the connection TCP must work with the real hardware. Hoping that someone more competent than me in this relm can point me in the right direction.

  You have probably done this, but you made sure that your VM is set to a "Bridged" mode where the network connection between the virtual machine and the host allows him to get an address from an external DHCP server and is not only local host machine?  MAX can only auto-detect devices to its subnet via a proprietary (OR-RFP) protocol or via AppleTalk (according to how the devices are configured and what software is on them), and if the interface of the virtual machine network is in mode "NAT" or "Host-Only mode" which interferes or completely blocks the discovery method.

  -Danny