Remote system disconnected after having installed MAX 4.7.3

Similar Questions

• Satellite L510 - WLAN disconnects after having ejected the disk USB

  Hey.

  I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.

  What's happening:
  After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.

  I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.

  HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.

  I would really appreciate if someone could provide any kind of fix for this.

  My laptop:
  -Satellite L510
  -Windows 7 64-bit OS
  -pentium (R) dual-core CPU T4500 2.30 GHz
  -2 GB of ram

  Hi captainmarvel,

  Just a simple question: have you tried to update the driver WLAN?
  New driver WLAN, you can find on the official website of Toshiba in order to check this!

  Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
  You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?

• no connection disconnected after having authenticated in mobile theme 4.2 APEX

  Hello
  
  There is no link to logout after having authenticated in mobile theme 4.2 APEX in apex.oracle.com. Is this a bug?
  
  Thank you.

  Checked and there is no link of disconnection from the Mobile Page and we will address this issue.

• T440s lost Bluetooth after having installed the latest updated via the Lenovo system update

  Hi everyone, my setup - Windows 8.1, Intel Dual Band Wireless AC 7260 with Bluetooth built-in.

  After the installation of the last packet of Intel's Bluetooth (via the Lenovo system update), I lost Bluetooth constantly.

  -J' I tried to uninstall the update of the driver, nothing has changed.

  -J' tried to restore through Windows Restore Point (I did a fresh restore point before you install these updates,) without success...

  I noticed that:

  -When this happened, the fingerprint reader to are featured strange - there is no if light (with green light) initially, Windows, and Windows was asking me a password instead of the fingerprint.

  -In the Device Manager. Bluetooth category disappeared (I was there before the upgrade - for sure.). but I saw a new unrecognized device whose name ends with something like "(de l'énumération n'a pas pu) '-this could probably be the Bluetooth card."

  -L' tray for Bluetooth icon disappeared.

  -The Bluetooth system option submenu and its devices in the Windows settings disappeared (and it was here before).

  -Looking for Bluetooth in Windows 8.1 returned property (with Win + W hotkey) framework "set up Bluetooth devices" or similar, but when I clicked it, it couldn't access this option - just took me to the main configuration screen.

  I had to do a restore of the system using Linux (thankfully made a full HD image backup of the HDD and SSD using Clonezilla readers - that was the only way to fix this-instead of complete reinstallation of Windows).

  The only driver that works for me is the Intel version 3.1.1307.364 issued on August 1, 2013.

  -Anyone else had similar problems?

  Apart from this, the Bluetooth disconnects always happen: see http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-major-WiFi-and-Bluetooth-instability/...

  Can someone give me some advice please?

  I need help with this.

  I found a solution to this problem.

  Apparently, installing bluetooth driver through update system does not install it properly.

  So I downloaded the latest driver of Lenovo driver download page, and instead run autorun.exe, I sailed to 64-bit dir and then run the installation program.

  Everything works fine now.

• Error - DRIVE - no IS NOT READY - the SYSTEM IS STOPPED after having installed a hard drive.

  Original title: need HELP just installed new HARD DRIVE.

  I adjusted has installed a new drive WD Desktop Hard in a Pent III; TRIED to raise the HD; computer and then tells me that the TRAINING SYSTEM - no IS NOT READY - IS INTERRUPED. I checked all cables & connections; & Yes by turning the hard drive. What am I missing or very probably wrong. Any HELP.  Sincerely of Merlin

  Hi Merlin,

  Thank you for the information.

  Have you tried to run a check disk from the BIOS (Basic Input Output System)? If this isn't the case, you can try to do a hard drive from the BIOS test & see if the problem still occurs.

  If you are not comfortable with the BIOS, you you contact the manufacturer of your computer for help.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 2000 laptop: laptop of HP 2000 keeps disconnecting after having entered the password

  I got this laptop a few weeks ago and it worked fine, but then, weeks later, I type the password. So when I got was about to head on the desk, it somehow disconnected instantly. Then I type the password again, it just said 'Welcome' and vanishes in the background with the battery icon and wifi in the lower left corner. Doing so again, the background is blue, but the icons are still there. I restart the laptop, the same process. Any way I can stop this?

  @AssistNeeder553,

  Hello and thanks for the display on the HP support forums.  You'll need to do is start in safe mode and do a system restore to before this problem started.  An update has made a change in the configuration that is not sitting well or you have installed or updated something which that disliked the system.

  HP computers - using the Microsoft System Restore (Windows 8)

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• I can type over the at (@) symbol after having installed C6 PS ID AI BR and Lightroom.

  I installed the Italian C6, but after losing the keybord alt + @ combination.

  Hi Cucuruku,

  Just a guess, but I looked at it and wondered if it could be linked

  http://www.itlisting.org/5-Windows/d93b90bef334ba68.aspx

  You could check in the system tray and try to disable some applications running it and see if it makes a difference.

  -Dave

• New printer Officejet - 8610 pro - after having installed a noise strong cartridges occurs

  Trying to set up a new printer, Officejet Pro 8610. Installed the cartridges - when he tried to calibrate them there was a clicking noise, it cancelled the calibration.  The sound repeats whenever I try to do anything. I tried to reinstall the cartridges. The machine itself does not indicate a problem, and seems to be ready. So far I tried only to copy, which failed. Everything turns and noise.

  The problem was solved by replacing the printer.  Believe me, I've tried all the tricks, reloading, disconnect, etc..  Finally called HP Support - which was very good - and they have helped me determine that I had bought a defective machine.  Replaced it and the new one works fine.

• Application does not not after having installed the wrong version

  Hi all...

  I wrote a simple application that sends an e-mail message and tested many times up to now. Never had any problems. I have make changes every time, I generate for BB OS 4.5.0, version 4.6.0 5.0.0 and 6.0.0. Yesterday evening, by mistake, I installed 6.0.0 version of the application on my BB 4.5.0. When I run the application, it gave me an error. I realized the error and uninstalled immediately. But later, even after you have installed the correct version, the application never worked (4.5.0). By clicking on the 'Send' button simply does nothing (it allows to send an e-mail earlier). The same application with the corresponding versions working on my BBs 4.6.0 and 6.0.0 without any problem. The 4.5.0 version works very well with the Simulator.

  Can someone please suggest a way I can get my 4.5.0 version works on the phone again?

  Thank you very much in advance!

  Well... I deleted all the data of the Application on my phone and started from a square. This corrects the problem.

• question fundamental House window 7, after having installed Avast

  Hi guys,.

  I have a problem. I installed avast 7 on Windows 7. I have a password for my laptop. whenever I turn on it will get stuck to the password window. the mouse does not move. keyboard does not work. tried in safe mode and sfae mode with network too... plss help Mr. on that... Thanks in advance for the help.

  Hi Paul,.

  What happens when you try to connect with the safe mode and safe mode with networking mode, you are able to connect?

  Try the following and see if it helps.

  Method 1:

  I suggest you try starting in the last good known Configuration and verify if you are able to connect.

  Using the last good known Configuration: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Method 2:

  If the problem persists, I recommend that you perform a restore from the System Recovery Options system.

  To do this, follow these steps.

  (a) remove all floppy disks, CDs and DVDs from your computer and restart your computer by using the power button on the computer.

  (b) do one of the following:

  If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If your computer is not listed as an option, then your computer doesn't understand no repair preinstalled recovery options, or your network administrator has disabled the.)

  (d) to select a keyboard layout and then click Next.

  (e) in the System Recovery Options menu, click a tool to open it.

  (f) select System Restore.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Keep us updated on the status of the issue.

• Apple 3rd generation does not after having installed new router put I in the codes manually

  Hi recently had outages etc and a new installed router in wifi but now my apple tv 3 does not work but only home screen sharing/settings see I am signed the Mac for home sharing.  When I go into network settings I see the configuration is automatic, but the router shows that n/a, does that mean that I have to put codes?

  TIA

  Wendy

  You have connected the Apple TV for the new router?  You will need to make sure that the Apple TV is connected to the wifi network, which broadcasts the new router...

  Get help with Wi - Fi on your Apple TV networks - Apple Support

• ProBook 6540 b: no NIC after having installed the drivers

  I tried to rebuild my 6540 b and passing by the pilots tried to install the Marvell LAN driver and it installed properly but the LAN card from the list of devices disappear.

  There are several other unknown devices as theres no driver for the list. I tried different versions of drivers and even others, but nothing has worked so far.

  You are the very welcome.

  You need these drivers in the order of the ID you posted.

  ACPI\HPQ0004:

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  PCI\VEN_8086 & DEV_3B64:

  FTP://ftp.HP.com/pub/SoftPaq/sp48001-48500/sp48063.exe

  PCI VEN_1180 x 2:

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46999.exe

• Why Whatsapp disappeared on Apple Watch after having installed the 2.1 OS

  To cancel the possibility of using Whatsapp for my Apple Watch was a good idea!

  When I boutgh my Apple Watch a guy in the Apple store told me that: "whatsapp now receive only notifications but, in a certain time, you're going to use it fully.

  It seems to me that we return instead to go further.

  Hello

  To receive notifications on Apple Watch WhatsApp Messenger:

  On your iPhone, in the application of the watch, go to: My Watch (tab) > Notifications > under the heading "alerts iPhone mirror of", scroll down to WhatsApp Messenger > turn on notifications.

  Also on your iPhone outside of the app shows, go to: settings > Notifications > scroll down and tap on WhatsApp Messenger > check allow Notifications is turned on and also the show in the Notification Center and display them on the lock screen are both enabled.

• does not restore the system files after clean install

  When I click on the HARD drive which has my backup file, it says that "windows could not find and backup sets on e:\.» Please selection elsewhere. "When I click on"Refresh"this disc shows up... again.  When I look at the contents of the disc there is a file named: N360_BACKUP, however it will not recognize it, so, not restore it.

  Is there another way to restore my files? I was really counting on this form of backup, and if I can't restore it, I lost all my emails, email addresses, contacts and favorites for the past two years, no to the meniton photos, music, etc.

  I have looked at similar positions here and tried the suggestions in them with no luck.

  Hello Terryjoe,

  Thank you for your message.  The N360_Backup referred to Norton 360.  We will be more than happy to help you to restore your data, please answer a few questions first well.  What version of Norton 360 backup/restore are you using?  Below are the steps for version 2:

  1. go to the folder C:\Program Files\Norton 360\Engine\3.x.x.x, you will find a tool Arestore.exe (3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)

  2. navigate to the folder C:\Program Files\Norton 360\MUI\3.x.x.x\09\01, you will find an Arestore.loc file ((3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
     
  3. copy Arestore.exe and Arestore.loc to the root directory where you saved the backup created using Norton 360 (the long file aside the N360_BACKUP) and run Arestore.exe.  It will look in the N360_BACKUP folder to your backup set.

  In your case, you must copy Arestore.exe and Arestore.loc to the external hard drive where you have the file N360_BACKUP. Double-click on Arestore.exe, it will work and restore all your saved data.

  If this does not work, go to the next series of steps...

  4. If she fails to find your backup set, you must delete the corrupted catalog file.

  To delete a catalog file corrupted, go to the N360_BACKUP folder.  There should be a folder with a long alphanumeric name, open that folder.  You can see a file named backup.@db.  It is the catalog file.  You must move this file in this directory (put on your desktop for added security).

  5. Once backup.@db has been deleted, go back and try to run Arestore.exe from the root directory.

  Note: This process may take some time.

  http://community.Norton.com/Norton/board/message?board.ID=Norton_360&message.ID=14505

  See you soon

• Whenever my id of disconnection after system reboot

  Whenever my id of disconnection after system reboot

  Hello

  Please ensure that you have the latest version of the installed Creative Cloud application

  http://helpx.Adobe.com/creative-cloud/release-note/CC-release-notes.html

  We also have the solution for him having to log on each product launch

  http://helpx.Adobe.com/creative-cloud/KB/unable-login-creative-cloud-248.html

  You can view the creative cloud sign me or asking to connect you several times

  Let us know if this helps!