Remove or replace (NOT append) data channels PDM

Similar Questions

• HP Mediasmart DVD on a6750t will not display data channel 5.1 via SPDIF or HDMI

  So, I got a desktop HP custom computer new Friday. Started playing with it on Saturday. I called Sunday morning to request an RMA number and return shipping label. Here's my saga:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Started HP problem calls to 03:47 February 15, 2009

  Region (by spelling rep) said return is processed through warranty / customer). He said that HP does not publish a badge number. Ticket # xxxxxx3374.

  (Transferred to warranty/support service)

  (The line was full of static-asked for the 800 for the reminder. No one said that he had not the number I called in the. EU log www.hp.com. Found the number to call is 1 (800) 474-6836. I called this number.)

  Satya (by spelling rep) responded to the line. I told the rep that I don't get any output 5.1 for the Blu - ray disc software that was provided by HP (HP Mediasmart DVD). Informed him that all MS products, DVD and HD devices sent out to my Yamaha receiver 5.1 channel. [Are the important part of DVD. As the same drive is used for THE DVD and Blu - Ray, it is my opinion that the material works very well.] I repeated several times that the only thing to do not send 5.1 channels of data has been the player of HP MediaSmart DVD software for drives Blu - Ray.

  Satya ran various tests and wanted to "call back tomorrow with a solution. He seemed to think that maybe there is a problem with the hardware, and eventually I wasn't getting something in my order.

  I clearly started I wanted an RMA number and I wanted to return the product. Satya refused, saying that he had to 'search' the problem until it could issue the RMA number and return the product. He said he'd call between 14:00 and 17:00 tomorrow (STD) (I informed him he is currently 04:49 to my place.)

  The problem is not with the hardware. All software Microsoft products that support 5.1 channel send through data 5.1 SPDIF (optical cable) channels. Once again, all the DVD and other 5.1 (HD PVR) devices send (via s/PDIF) 5.1 channels of data to my Yamaha receiver. The only thing not released in 5.1 is the software (HP Mediasmart DVD) Blu - ray disc player. DVD is ran using the player Blu - ray (on the system only) and sends the data of channel 5.1 without any problem.

  Closed the problem HP call 04:52 February 15, 2009

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Thus, any other suggestions? I tried different things such as Passthrough-HDMI, HDMI-PCM, SPDIF and output of 6 speakers on the application of reader software HP MediaSmart DVD Blu - ray without result.

  I decided to try contacting chat support to see if they had ideas... After almost 2 hours of troubleshooting, a support chat, there is no current solution. I find myself with waiting on an another software update (I guess the previous update does not solve this problem and took 6 months to publish), or return the PC with installed defective software.

  When support calls me I will request the RMA and return labels to be reactivated and ship back to HP PC.

  I then go to BestBuy and buy a Blu - ray player.

  Good luck if you are keen on your nice new Blu - ray player and enjoyable new disc from reading over 2 channels.

  Unless you install a different drive (that YOU will have to pay), you're completely out of luck is HD audio (5.1, 6.1, 7.1 channels) via SPDIF or HDMI. I looked on all systems CTO and they ALL use the same software. Well. Mabey HP will be better in a few years.

  I am posting this as a solution only as the solution to the problem was to ship the return to HP PC and get a refund. < sigh >

• writing cannot be porformed, because data channels number does not match the number of channels in the task

  Hello

  I'm writing analogues of the buffer to several channels using NOR-6723.

  For some reason any, whenever I go to the buffer double function (1-d) that contains buffers for all channels.

  I always find myself with exception indicating that the numbers of channels in the data are '1 '.

  I use c#:

  Task m_TaskHandle = new Task();
  
  string sChannelsList = "Dev2/ao21:23";
  
  m_TaskHandle.AOChannels.CreateVoltageChannel(
  
  sChannelsList,
  
  "", 0, 5, AOVoltageUnits.Volts );
  
  int iNumberOfSamples = 4;
  
  double dSamplingFrequency = 1000;
  
  m_TaskHandle.Timing.ConfigureSampleClock("",
  
  dSamplingFrequency,
  
  SampleClockActiveEdge.Rising,
  
  SampleQuantityMode.ContinuousSamples,
  
  iNumberOfSamples /* Only relevant if mode is FiniteSamples */);
  
  // Data code is heredouble[] adSampleBuffer;// array values removed from this code snippet (here i have function that generates data)// array size is: num_of_samples * total_channels (in this case 4 * 3)
  
  AnalogSingleChannelWriter ChanWriter = new AnalogSingleChannelWriter(m_TaskHandle.Stream);
  
  ChanWriter.WriteMultiSample(false, adSampleBuffer);
  
  m_TaskHandle.Start();
  

  Not sure I'm I missing, how the MSTDIO determines the "number of data channels", I receive as an exception, it is always equal to 1.

  would appricate to help.

  Thank you.

  Hi idanbis,

  As the snippet you posted, you can create more than one channel using the ao21:23 range. That said, you should use AnalogMultiChannelWriter to configure your write instead of AnalogSingleChannelWriter operation.

  To write using AnalogMultiChannelWriter::WriteMultiSample (boolean, double, you must know the data you want to write must be stored in a 2D array.) Each element in the first dimension of the array corresponds to a channel in the task, while each item in the second dimension, to a sample of write on its channel. For example, that:

  Double [,] data = new double [numChannels, numSamplesPerChannel];

  Then:

  data [0, 0... numSamplesPerChannel]; It is the set of all samples in the first string (ao21 in your code).

  I hope that was helpful. Let me know if I left any doubt remaining.

  Best regards

  Anzurio

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• G61 does not illuminate unless I have remove and replace the battery.

  Even when the power cord plugged in it will not light. If I remove and replace the battery it lights mode battery and AC. At the same time my HP Support Advisor and HP s Advisor "stopped working".

  I restore to a previous point, no help. Downloaded a new HP advisor, ho help.

  This happened after the recent big WIN7 updated. Help

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K

• cartridge in the slot on the left is not intended to be used with this printer. Remove and replace

  Hello

  After using my printer on a regular basis and without any problem, I suddenly had this coming message: "cartridge in the slot on the left is not intended for use in this printer. Remove and replace.

  I have a computer that is running Windows 7, 64-bit and the cartridges that I use are all genuine HP cartridges, black and tricolor cartridges are XL.

  What surprises me the most, is that the left cartridge is not empty, I without touching it, there was no jam paper, or any other poor behaviour of the printer. It happened just in the middle of printing, the printer just finished a job, and was about to start the second in the queue. Maybe this detail can help or it's just a coincidence...

  Thank you for your help

  Tonphilou

  Hello

  Please follow the steps in the document below.

  http://support.HP.com/us-en/document/c00042821

• How to remove line empty when the data are not for a text field

  I created a PDF with Acrobat Pro 11 model. This model has an address of the employer with the address line 1, address line 2, city, State, zip code, country. The requirement is to show address line 1 and line 2 address in separate lines and address line 2 cannot be present always. If address line 2 is not present then the PDF should not show a blank line. How do I get there?

  These data are populated through xml by a publisher of BI. New line characters do not work.

  Appreciate your help on this.

  Hi sprphoto123,

  If you do not enter data in the text field 2 then you can set the form field property to is not mandatory, but if you want to disable the 2nd text field, you can add a check box in front of it to turn off the field. This can be achieved using JavaScript.

  Kind regards

  Nicos

• Unpack the cluster data channels

  Hi all

  I tried for this research, it seems quite common, but I don't know that I used the right set of words:

  I receive data from a device in the packages. Each sachet contains several images, each image contains two subframes and each sub-frame contains several data channels. In my vi, the package is a cluster, executives are clusters and the subframes are clusters, all the typedef' ed.

  What I want to do, is to take the big initial cluster and divide the data into a set of tables, one per channel data, without generating spaghetti.

  The function "decimate the table" would work great to do the job, but alas, it only works on the berries, no groups, and it seems that my group cannot be converted to tables.

  Is there something that I am missing? I have attached a photo of high level... Note that I'm not an artist. "N" and "m" values are fixed, so there is no variability

  By "append" do you mean "build the table? ' You can use "Cluster of Array" instead?

  Also note that if you have a cluster where the latter are the same, regardless of how many nested groups there, then you can Cast from Type to an array of this type of final element. For example, if all data real of your cluster is single precision floats, you can the Type Cast to an array of SGL.

  If you can upload a screenshot or your code saved to an earlier version, I will try to provide more specific help.

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• END of the TNS data channel

  I use IKM:sql command append, LKM: load sql to oracle ORACLE CKM:CKM
  but by exploiting the module in error:
  For action 'table of analytical work' status is "attention".
  warning Msg:
  17002: null: java.sql.SQLException: IO exception: end of TNS data channel
  java.sql.SQLException: IO exception: end of TNS data channel
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
  
  at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:649)
  
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
  
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
  
  at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
  
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  Description:
  BEGIN
  DBMS_STATS. () GATHER_TABLE_STATS
  ownname = > 'ODI ',.
  tabname = > "C$ _0target_table"
  estimate_percent = > DBMS_STATS. AUTO_SAMPLE_SIZE
  );
  END;
  
  
  then
  For action ' create flow table I$ 'status has warned.
  17008: null: java.sql.SQLException: closed connection
  java.sql.SQLException: closed connection
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:753)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:670)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.updateExecStatement (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  Description:
  create table ODI. I _target_table $
  (
  CALL_TYPE VARCHAR2 (25) NULL,
  MSISDN VARCHAR2 (25) NULL,
  CALL_DATE VARCHAR2 (25) NULL,
  CALL_TIME VARCHAR2 (25) NULL,
  OTHER_NUMBER VARCHAR2 (25) NULL,
  INDICATED VARCHAR2 (25) NULL,
  TERM NUMBER (10) NULL,
  IMEI VARCHAR2 (35) NULL
  )
  
  
  so for the action "insert stream in I$ table" status is RED
  performance:
  17008: null: java.sql.SQLException: closed connection
  java.sql.SQLException: closed connection
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:753)
  
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:670)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.a (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.updateExecStatement (SnpsQuery.java)
  
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.i (e.java)
  
  at com.sunopsis.dwg.cmd.g.y (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  Insert into ODI. I _target_table $
  (
  CALL_TYPE,
  MSISDN,
  CALL_DATE,
  CALL_TIME,
  OTHER_NUMBER,
  INDICATED,
  DURATION,
  IMEI
  )
  Select
  C1_CALL_TYPE,
  C2_MSISDN,
  C3_CALL_DATE,
  C4_CALL_TIME,
  C5_OTHER_NUMBER,
  C6_CELL_ID,
  C7_DURATION,
  C8_IMEI
  of ODI. C$ _0target_table
  where
  (1 = 1)
  
  How can not solve the problem?

  Hello

  I had not fallen on this error, a little but still try to help you,

  I did some r & D and comes to know his problem with connectivity, although I don't know yet (but I'm sure that's not coz of ODI). :)

  Please take a look the link that can help you, below

  http://forums.Sun.com/thread.jspa?threadID=280338&MessageID=1090056&forumid=48

  http://forums.Sun.com/thread.jspa?threadID=5348347

  I hope this helps.

  Thank you
  G

• Why can I not select a channel update for only security releases?

  It is a development machine. I write software that works in browsers, including yours. I would like to keep your current browser regarding versions, except that the framework that I use does not always keep upward. I'm trying to catch up with your security releases. Which is certainly worth the risk and effort. Your information, explains that "releases" set current channel "includes" provided security. How about an update channel which contains only security releases?

  And also, how do I know the number and properties of an imminent update? I only have a button to install a version. No information of what I install.

  Hello Rick, the esr up-to-date channel ('XR support') will get updates of security only: https://www.mozilla.org/en-US/firefox/organizations/faq/

• Satellite A30 921: how to remove and replace the memory?

  Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.

  Thank you in advance.

  Hello

  There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5

  Good bye

• rebuilt drive ReadyNAS 104 replaced always display data degraded data

  Have a 104 - drive in slot 1 readynas failed-

  tested the new drive all tests

  replaced by model and brand

  It detects and rebuilt volume showing raid 1

  Once rebuilt still happens with degraded volume

  running latest firmware

  Have you tried restarting and once rebooted begins the rebuilding process again?

  Someone has any ideas

  Thank you

  Well I would like to back up the data to another drive if you can (do not try and replace the existing data).

  Then with only good new records in the NAS do a factory default (erases all the data, settings, everything) and restore your backup data.

• Laptop HP Touchsmart 15-D020: how to remove and replace the keyboard on laptop HP Touchsmart 15-D020NR

  I spilt a drink on my keyboard and now I can not turn off the caps lock and a number of keys does not work. I need instructions on how to remove and replace the keyboard frame. Thank you.

  On your page of support-look for Maintenance and Service of Guide in the manuals.

  http://support.HP.com/us-en/product/HP-15-D000-TouchSmart-notebook-PC-series/6627588/model/6761859/manuals

• Executable file do not write in tdm/PDM files.

  Hello

  I wrote a wrapper around a VI that controls the entries to designed the hardware and monitors the outputs for the prolonged lifetime of testing purposes.  We use compact DAQ for control and data acquisition.  We do not wish to moor a LabVIEW license for six months to run the desired test, I compiled an executable and built an installation program.  Everything worked without problems on a PC with LabVIEW and everything seemed to work well on a PC without LabVIEW with the executable... until I decided it was time to start analyzing the outputs recorded (tdms files).  The application is able to not control my material, no problem, I could see it passes through different States and key measures that I display on the user interface are valid, but the log files are simply cannot be created, not even an empty file.  At the lowest level, the open storage VI [TDM] is called to open or create the file (filename is entered by the user or created with timestamp if he did not) and each 'bit' of data is written by writing data [group of channels] and write data [channel] live on the PC with LabVIEW, the output files are created without problem.

  Did not work with executables before.  How can I start to debug (without installing LabVIEW on the PC in question - and when all goes well when run on a computer with LabVIEW installed)?  Have tried to build the executable with active debugging, but do not know how to "enable" debugging or a walk through as in LabVIEW... or if it's even possible...  I don't get warnings or errors during the race.  Is there something special I need to do in the construction of my executable or installer, particularly writing executables TDMS files?

  Thanks in advance

  -Andy