Remove USB: Lack of notification "safe to remove".

Similar Questions

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• Can't boot from usb, lack of boot USB for dv7-4173us option?

  I couldn't find an option to boot from USB on my

  HP Pavilion dv7-4173us laptop BIOS.

  How to enable boot from the USB port?

  Thank you.

  Hey hpng,

  I am pleased to hear that the option is now available. When you set up a dual boot with Linux, I have very little information on how to do it. The only thing I would say, is to read the document "frequently asked Questions (FAQ) on Linux". It has a lot of frequently asked questions, but the main reason is, to the bottom of the page you will see an option to where I can find more information about Linux.

  Depending on what version of Linux you want to install, I suggest you post your question on the Linux community.

  I hope this helps!

• The lack of notification Center

  I'm under El Cap 10.11.3 (unfortunately) on an iMac 27 end-2011 ", but I think that this problem exists in the Yosemite Park and perhaps even further.

  I see the icon in the menu bar above to the extreme right to Notification Center and have the Notifications Panel in system preferences, but cannot invoke the Notification Center bar in a sweep two fingers of the right edge or by clicking on the icon in the menu bar. I tried the advice of a support wire to reset with a Terminal killall command, and the answer is "no process matching belonging to you were found." I also tried to stop the process with the activity monitor, and the Notification Center does not appear in the list of processes.

  Any means of Notification Center install/restore easily? It's not a big deal, but I can imagine that it would be useful from time to time.

  SystemPreferences-> Notifications

  Do not disturb: uncheck all of the checkboxes, it helps?

• How to remove photos from a photo stream on the iPhone, but keep them on Mac?

  Hello world

  I tried to find the answer to my question in the FAQ, but so far I've failed. I'd be really grateful if someone could help me.

  I have an iPhone (5s) and a MacBook Air (13 inch, early 2015). I have not activated the iCloud photo library, but I use the photo gallery on both devices. Because I often take pictures with my phone, I'm running out of memory space on my phone.

  In regards to this and photo stream feature, I have several questions:

  1. If I want to make more room on my iPhone, I have to delete some pictures. Assuming that I do this, these pictures are deleted from my Mac after 30 days?

  2. How can I remove photos from my iPhone without deleting them from my Mac (because I turned on the feature of photo stream)?

  3. If I import the photos from my iPhone in the Photos App on my Mac (when it is connected to my Mac with a USB cable), they are 'safe '?

  I hope that my questions are understandable and I would appreciate all the help I can get.

  Thanks to all and best wishes,

  Lars

  1. no - as long as you have allowed MyPhotoStream to import photos - if they have not been imported yet then they will be gone

  2. after importation of pictures you can delete them from the iPhone, and they will remain in Photos of the moments / pictures

  3 - Yes - but if you import several times, you will have duplicates - you should use USB or PHM import

  LN

• Stream laptop HP 13: remove pertition of recovery.

  Delete recovery pertition because Windows updates the fillings of the C: drive.

  HP online did you remove the pertition of recovery, but then the computer would not start.

  Used and recovery USB and only partition the HD with the Partition Recovery and only authorized option C: dirve.

  Recovered the system and the recovery Pertition was released with the data.

  The HD is 32 GB.

  As long as you have a usb work checked HP recovery key, I don't see any problem with the removal of the recovery partition. Put the usb recoveryflashdrive in a safe place for storage.

  You can do this by using the console component of disk management snap-in.

  Right click on the Windows icon and select disk management. Click on the recovery partition. Right-click on the recovery partition and click on delete. The recovery partition is removed. Now you can close safely from the disk management console.

• Controllers host USB Icon

  The icon USB in the notification area of the controllers list 4 bar and my tasks C:\ drive.  I use Win 7 as guest on a Mac book OS using OS Snow Leopard.  The listed controllers) 1 Enhanced PCI to USB Host Controller.  (2) universal PCI to USB host controller.  (3) pro/1000 MT Network Connection.  (4) Hign Definition Audio Controller.  (5) VMware Virtual S SCSI peripheral drive Local C drive. \.

  Is this normal?  If this is not how to resolve this so that they do not show here.

  It is normal and expected, however, you can add the following parameter value in the configuration file .vmx to remove the dialog box remove the device safely.  Note: It reappears when you plug an external USB device but you see not the internal devices on the dialog box remove the device safely.

  devices.hotplug = "FALSE"
  

  Note: Modify the configuration file .vmx with stop the Virtual Machine, not suspended, and closed VMware Fusion.  Stop the Virtual Machine of the guest operating system, and then ctrl - click on the entry of the Virtual Machine in the Virtual Machine library and then press the option (alt) key and select open the Config file in Publisher, and then closing VMware Fusion.  Add the value of the parameter to the .vmx config file, save the change while closing the file then open VMware Fusion and start the Virtual Machine.

• HP ENVY 750z desktop PC: transfer Hp Recovery on USB

  I have just recieced my computer of 750z HP ENVY. I see that the computer recovery partition is a drive D: with 2.18 Go Go 17.5. I would like to come back to this space. Is it possible that transfer to a USB key? Would be all I need is one that can contain the 2.18 GB or GB 17.5 all? How would then delete the partition (disk?) for this space to hard drive?  Also if someone could also provide information on what I need to do to use a USB to recover in case I ever do must recover. I've never had to do anything like that.

  Hello

  Yes, but we don't call it 'transfer' we call creating recovery media. Use the following instructions (page #15).

  http://h10032.www1.HP.com/CTG/manual/c04843029

  After that, keep the USB key in a safe place (you may need a day) and you can delete the recovery partition.

  Note: You can only create once.

  Kind regards.

• Is JTextArea append() method thread-safe?

  It was noted in another ad that in JDK 7, the JTextArea append() method is more explicitly described as being thread-safe:
  
  http://download.Java.NET/jdk7/docs/API/javax/swing/JTextArea.html#append
  I do not use JDK7, but here is the code for the method append in JDK6_7 (I guess that he has not changed in JDK7?):
  

  public void append(String str) {
      Document doc = getDocument();
      if (doc != null) {
          try {
              doc.insertString(doc.getLength(), str, null);
          }
          catch (BadLocationException e) {
          }
      }
  }

  As you can see the code simply calls the insertString (...) method of the Document. JDK7 documentation, the insertString (...) method is still marked as being thread-safe:
  
  http://download.Java.NET/jdk7/docs/API/javax/swing/text/PlainDocument.html#insertString
  
  I always confused when you work with Threads. A few questions:
  
  (1) if the append() method eventually calls insertString (...), which is a safe method of thread that does the method append() safe thread?
  
  (2) assuming that the code in the method append has not changed in JDK 7 documentation has been bad for the first 6 versions of the JDK? Or is the documentation for JDK 7 lack instruction thread safe?
  
  (3) I know in the past I've suggested append() is thread-safe. It seems I should change my advice to wrap this method in a SwingUtilities.invokeLater (...). Is this a safe approach in any case to avoid confusion?

  camickr wrote:
  The PlainDocument does not use a lock. Here's the code for the JDK6:

  The lock is #insertString AbstractDocument. The additional filter of PlainDocument #insertString code is thread-safe, because it uses only local variables and GetFilter() reading is true or false/null.

  Even if filtering is not done, is it not theoretically possible that change of threads can occur before the super.insertString (...) is running?

  I guess what I'm asking is that if a single line of code runs before the writeLock() method is called is there way for there to be threading issues?

  Yes, but it's similar to the way in which a synchronized map is thread-safe, you can call containsKey (k) followed by get (k), and these methods are "thread-safe", but if you want to combine you need to do an extra lock. The only thread safe object is immutable.
  One difference here is that a card will return NULL but AbstractDocument launches a BadLocationException. Also if you want to get the lock, the only option is to subclass since writeLock() is protected and final.

• Problems after XP Antivirus 2010 System32\rundll.exe

  I finished the process of "av.exe" on Task Manager; deleted "AV."EXE"prefetch folder. Cannot access control panel; Cannot run programs because of the corrupted rundll32.exe file possible (a box pop up asking what program would I use to run a file); tried to copy 'rundll32' of the disc of recovery in 'safe mode' as well as the extension of file according to the instructions through Microsoft rundll32.  MalwareBytes via USB key ran in safe mode nothing detected.  Still stuck.  Does anyone have a solution to this problem?  I see that several people caught a virus this weekend in addition to myself.  Thanks in advance for any help...

  The problem with the infection by these rogue security programs is that they often bring along other boyfriends, many of whom are much more difficult to remove and which often damage the operating system. You can try to do more in-depth analysis that just with MBAM (even if MBAM is certainly great that does not heal everything!). If you are unable to do this, then you can try a repair installation. If the repair installation does not work, then accept that the system is too damaged to save and do a clean install of Windows. Make sure that you back up your data on a removable media first.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• How to recover Windows on Satellite M40?

  Hello
  I encountered a problem due to the power cut when my PC stop

  No chance to restart because I got the message: error c0000218
  lack file \windows\system\vga850.fon
  in the first window, select R
  If I load the CD provided by Toshiba receovery system I am reading I will format the hard drive and lose all data.
  I'm not an expert
  It has all my work on this computer and I do not understand how ot
  There is the choice to select 2 Advanced
  local > disk > from image
  partition > to image
  control > image file
  > disc
  choice of different options

  I do not see any window by a R

  I have printed information where it says to start a recovery console: no idea what it could be?
  I tried different things, but without success
  pressing F8 but go back to the same issues as above
  safe mode
  with the command

  Any suggestions welcome

  Thank you for your help
  JMB

  Hello

  Looks like a complicated situation. You can now proceed as follows:

  1. ask someone who is an expert, allow him to copy your important files on a DVD or an external hard drive and apply recovery media to reformat and reinstall the operating system. After reinstalling you can put your files and you'll have a system clean and sober.

  2. press F8, and then choose Safe mode. In this safe mode, you should try to back up your data on an external hard drive as USB should work in safe mode.

  In both cases, you need to retrieve the machine, so just prepare to backup your data and reinstall the Windows operating system.

  Welcome them

• Two monitors on a Pavilion 23-b320

  I'm about to buy a 23-B320 Pavilion all-in-one and you want to know if anyone knows if you can add a second monitor to it. It doesn't have the port on the back for a second monitor, but I've heard that you can get a special cable that will allow you to turn a USB port into a video port... Any help would be greatly appreciated

  Hi Tronn42,

  You are right. You can use a converter USB to DVI (or VGA, or HDMI) video port to run on a second monitor. I did not flag 23 precisely, but he's worked on all all-in-one PC, I tried it on.

  For example, here are some converters DVI USB:

  https://www.Google.com/#q=HP+USB+to+DVI+adapter & Safe = active

  For reference, here's a video that talks about connecting TVs and monitors:
  

• Pavilion 500-164: bios update - no option to update

  Fan CPU and PC failure would not start unless the message "Fan failure. Fan has been replaced, but now always make mistake on blue screen BSOD, which reads "WHEA_UNCORRECTABLE_ERROR" and sometimes other errors. Windows tries to start in recovery but BSOD over and over again.

  What I tried:

  (1) reset BIOS default. DONE - behavior even after resetting to BIOS defaults.

  (2) I tried booting from USB drives (several) using the tools of recovery of Linux (Ubuntu Live, Kaspersky, etc.). KERNEL PANIC, etc..

  (3) downloaded BIOS update HP and created update BIOS USB. Restarted with USB (I turned off safe boot, etc. to allow booting USB.) - NOTHING. I tried the two BIOS to run untouched and by going into the BIOS options (by pressing ESC @ boot upward) - none of the options anywhere to read/set the BIOS updated.

  According to a doc Support HP, I tried updating the BIOS of w / in "HP PC Hardware Diagnostics UEFI. The version on this PC is 5.2.2.0 version: I see no option to update UEFI (Flash BIOS). Options like suites: information system, system, testing of components, Test Logs, language Tests, exit.

  What I'm trying next, please?

  BIOS: JA2 v80.35

  CPU: AMD A8-6500

  RAM: 8 GB memory DDR3, DIMM single into the Groove 4.

  NOTE: The system came w / RAM into the Groove 4. Only POST is it RAM DIMM in the location #1. Is this normal?

  Thanks for nothing, Support HP...

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps

• How to fix my iPhone 16 GB 6 more?

  I had my first iPhone 6 more (16 GB) year last to the end of November. My new phone was working on a large until June of this year. I got the camera fixed because it was one of the models with the camera is not able to focus problem. Then, a few days later, he started chashing all the time, there were delays classifications (type id for 30 seconds, none of the buttons would jump to the top, and then I would stop and VERY slowly and glitch, he typed my paragraph). The iphone overheated when I simply opened the Mail and other basic applications. So I brought in, and they have restored my phone to factory settings. Not only I do not hate to lose all my content, but they said I can't restore my back upwards. I took a deep breath and said OK, as long as it is fixed. Only three days later, the problems got worse and more went to the surface. For example, whenever the id to try to go on Safari, my phone to heat instantly and then crash. So, I brought again. They gave me a new phone, and then I thought that things would be better now (I don't PUT MY OLD BACKUP ON THE NEW PHONE AS I WAS LOADED). N ° was the same problems, more they ruined my SIM card. I went to the Apple Store 10 times in the last 6 months, and the problems only get worse and worse. Whenever my phone Gets a diagnosistic test Apple, once he said it was my apps (those who, I promise you, we caught apple supported applications like Spotify), and then finally, the 9th and 10th time I got there, they tell me it's the software. I asked them to clarify, and they said that it was the space memory (I believe that, if I delete things, I needed on a daily basis and has 2 GB of storage for free there). I don't have the money to just update the newest iphone, but after that my father will itself to speak to a Manager, they said that there is a case for the iPhone. I bought it immediately, happy to finally have a phone that works! But it did not work. My phone is still trolling (even I typed all that out).

  I need help to get my fixed iPhone or what I should do next.

  These are all issues that my phone was seen;

  reboots with/without password, breaks down regularly, typing random delay, battery drain, apps crashing, freezes after pressing messages, backkey will not work, lack of notifications but not on all the other products, can not use touchscreen on the occasion, the House and lock button switch the phone immediately, locking time random phone capititilizations

  Notification e-mail remains after reading occasionally, hangs then to take a picture from time to time, when turned on its side on the lock screen, that I can not drag up to go to the camera, apple major lag, slow service in the world, site huge cards late, phone broke 6 times now making appointments make Apple Watch glitch, notifications of end, overheating on simple tasks, can not the screenshot

  Also, I'm on my iPhone 6 Plus 6 as well as the problems have been resolved no matter how many others I restore it to factory settings (and won't it is up), let the rest, turning on and outside and of course put.