Rename the VI in dll

Similar Questions

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• The file wmploc.dll has a version number of 11.0.6002.18065 where 11.0.6001.18111 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: MP3 Association.

  Hello

  Hello

  I have 64 Ultimate, I had a problem with the version number of WMPLOC. DLL, see the attachment. I run Kaspersky AV completely up to date.
  There is a lot of info on the net and none have worked in this newsgroup on how to fix this error however.

  I tried to change the version of the file with resource hacker and I tried all the dos commands to save the version of the file, but it worked only partially.

  I to WMP do not have access to the list of start/programs, don't y at - it programs in one and the list of features "Turn Windows features on or off", my desktop shortcut has been for version 32 bit and who made the error, as did double click an MP3 file.

  I have 32 and 64 bit versions of WMP on my PC, I created a shortcut on the desktop for the 64 bit version and it works however I can't associate MP3s with the 64-bit version, dialogue 'Open with' reverts to the 32-bit version (and I get the error) even if I chose the wmplayer.exe in 64-bit file , I tried to rename the folder WMP 32 bit for windows does not find the exe file in this folder and it uses just Quicktime for the association.

  Y at - it a fix for this problem of association?

  Thank you

  Daniel

  I guess you need go to the 64-bit version of Internet Explorer as well for this. There should be a shortcut to this version in the Menu start - all programs. Tim Baets
  http://www.BM-productions.TK

• How to stop Motion 5 to rename the items?

  How to stop Motion 5 to rename the items?

  For example, I have a folder named "Box" inside this folder are 5 additional folders and in these files are text and circles/squares etc.  Once I have copy and insert the name of the parent is "copy of zone 1", the names of children is now "copy print"1", 1 paper copy etc, and children are also name with a copy to the front and a number in the back.  If you like 50 items in the folder, you need to go to each name and remove the copy, then move to the back of the name and remove the number.  That would make 100 corrections.  If you duplicated "Box" 10 times that would be 500 times I have to delete the copies and 500 times I have to delete the number.  I am an organized person and I do not confuse names like "copy paper 27.

  I only want that this

  'Copy of movement case 12-11'

  to look like this

  "Movement block 12.

  It takes a lot of time to remove the copy at the front and out the number on the back of name.

  In Autodesk Maya 3D they do something similar, it turns 'apples' in 'pasted apples 1 ", so created a script that deletes all the text"stuck"in the name and number on the back the text name.

  I think it's a pretty silly renaming procedure.  Adds text to the front and rear.  Makes me wonder where they got their education.

  David

  David, for starters I can't duplicate what you describe, where things are added to the front and back automatically, you may need to clarify some things.  Looks like what you're saying is you have Group in movement named "Box" If you copy and paste the group, the name of the new group is "copy of copy of box?  Or you add 'Copy from' before the name of the Group at some point before making a copy/duplicate of the Group?

  Movement, like the Finder and many other applications, will add an object in double with 'copy', then add numbers after that. The structure of renaming seems simple enough. For example:

  1. start by a group of layers / named 'box '.

  2. copy and paste "Box" will give you "Box copy.

  3 copy and paste 'Copy of box' will give you «box copy 1"»

  My tests, if "copy" part of the name at the end, only the numbers will be added and increase gradually.  I think that if you get something like "Box copy copy" you have added manually "copy" at the beginning of the name, which is the only way that I could reproduce what you describe. If you don't want to have to remove 'copy' twice, don't start a layer name or "Exemplary" program group. Motion is probably not check if the copy is at the beginning, at the end.

  For what is a way of not having a copy or a number added to the end, it is not a.  It is probably a requirement of how the movement initially creates duplicates of layers/groups and make sure, that it is not destroy the existing layers. This is probably the best. This is similar to the creation of the records or documents in the Finder, just moving, you can go back and rename multiple items with the same name once they are created. If you are uncomfortable with writing scripts, sounds like you are, maybe it's a good option, otherwise you will have to do some manual changes as you go.

• How do I rename the folder of bookmarks 'Unsorted Bookmarks '? or add a folder at this level?

  With the help of Windows8 Firefox EU euballot - 1.1.
  Try to rename the folder of bookmarks 'Unsorted Bookmarks'? or add a folder at this level?
  I tried the suggestions in the forum (ie. Shift ctrl B); access to the file through library; all no chance.

  When you try to add a new folder on the same level as the 'Unsorted Bookmarks' folder, the new folder appears in the folder "Unsorted Bookmarks" and not on the same level.

  Something that I missed?
  Thanks for your suggestions.

  I do not recommend this. IIRC, users have mentioned that this folder has been renamed, when they started a new "Unsorted Bookmarks" folder has been created automatically when Firefox.

• Rename the session restore backup does not work, how can I restore previous session after a crash?

  Computer crashed and Firefox don't remember my session. It happened a few weeks ago while I had looked at how to fix and I learned from my mistake and saved the sessionstore.bak file before restarting Firefox. I closed Firefox, deleted sessionstore.js and renamed .bak to js but to start what it does not always restore session. Previous restoration on the history tab still grayed out, about: sessionrestore revealed without tab. I even tried to copy this file and also naming copies as sessionstore-1 & 2. How to operate?

  You can try to restore a previous version of the file sessionstore.js or sessionstore.bak. You must rename the .bak to .js file to make Firefox see this session.

     right-click: Properties > Previous Versions
  

     http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions
  

     http://kb.mozillazine.org/sessionstore.js
     http://kb.mozillazine.org/Session_Restore
  

     https://support.mozilla.org/kb/restore-previous-session
  

• Rename the folder

  bought a used mac with El Capitan on that, I would like to rename the folder.  I tried to go to users in system preferences, but it does not show up there.  Rename selection is not highlighted.  How to rename it?

  Better is to do it and do it again.

  What to do before you sell or give away your Mac - Apple Support

  EI OSX and apps locked to Apple ID used to 'buy' their and the password for that ID must be entered to update

• Try to rename the profile, now cannot start FF because it says it is already running

  So I wanted to rename the profile from my laptop. I went in the profile menu (on the laptop not Firefox) and finished by unchecking and rechecking the "read only"box. ". After that, Firefox would give an error saying that she could not access the security on the boot files. I searched Mozilla page and followed the instructions to rename profiles with no luck, restarts (multiple) no luck, profile deleted and built a new, no luck, deleted secmod and cert files with no luck. Uninstalled FF 8.01 installed completely and 3.6.3 (I think) and now it won't start because it says it is already running. I'm also getting a flag of Internet Eplorer telling me that another program has tried to change my search engine.

  Any help would be appreciated.

  Oops, something went wrong in this post. You don't have to rename a profile on the disc folder, if that's what you did to get the error "already running."

• Rename the icon on the home screen

  Is it possible to rename an icon that you put on your home screen? For example, I wanted a Hotmail icon on my home screen, but all I get is "sign in" (or something like that) and try as I might, I can't change it as you can a normal folder (click twice slowly on the bottom until it appears he highlighted and then type the new name).

  Thank you

  IndyJ

  Depending on the browser used, it is easy to rename the shortcuts.

  In Chrome (and the stock browser), just tap and hold any bookmark, and choose "Edit Bookmark".  Change the name, and then drag it to the home page.

  WyreNut

• HP Deskjet 2540: installed printer now get the HP StatusBl.dll error

  I have a new Dell computer.  I have a Windows 7 with a free upgrade to a Windows 10.  While Windows 7 I have intalled a HP Deskjet 2540 printer then computer upgraded to Windows 10.  Now on Windows 10.  I uninstalled the printer HP Deskjet 2540 and now get the HP StatusBL.dll error every time when I start the computer.  I drive and looked at disk to find L4uninstall.exe and can't find it.  The disc has a Util directory but no directory of CCC in the Util directory.  How can I get rid of this error at startup of the computer.  I love the HP products!

  Hello

  The error returns after a shortcut remaining once the software has been uninstalled.

  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts to 2540 printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• How to rename the external HARD disk

  Hello

  I use 2 recorders hard drive to my TV, one for Timeshift and record live and 1 to put music, photos and movies on it.

  When I need to shut the drive down to put more music or movies about it, I need to select the one that I'll save close.

  The problem is I can not rename those or put another top icon to see the witch disc I have to choose.
  Even if I rename the drive on the pc the principal name is always toshiba HDD.

  I hope you know what I mean because I worry about losing data or damaging the drive to not close corectly

  Hmm not very well if this would work but try to format the USB stick memory first

  Before the USB flash memory stick should be formatted, you may be able to modify the system files and the name of the device.

• Rename the Alu Stor E 2.5 drive "

  Hello world

  I just bought a Toshiba Stor E Alu 2.5 "500 GB and it showed only 465 GB capacity I stupidly did a quick format of my Dell Latitude 110 L laptop running Win XP pro.

  Since then the name of disc that I put in the properties is not recognized, and even though I have the rename, the only label that keeps returning under explore is "Toshiba USB - HDD".

  It is not a big problem because the drive is still working properly, but for a purchase up, it's pretty boring.

  Can someone explain how to fix this problem?

  Thanks in advance

  > Repetitive title was caused by the present on the disk Launcher program when you buy it.
  > Once removed the name that I had entered appeared on every Pc it was connected to.
  Great! Thanks for sharing this with us!

• Rename the Toshiba Canvio 2 TB

  I'm on a Toshiba Canvio external HARD drive 2 TB on my router (Fritz! Box 7490) as a NAS drive.
  Unfortunately the disc always presents itself as "TOSHIBA-ExternalUSB3-0-01" in the navigation tree.

  So far, I have not found a way to rename the device for example 'media '.

  Could someone tell me please how to do this.

  Simple change of name in Windows Explorer does not work. Must have something to with a disc HARD name provided / delivered by Toshiba.

  Thank you for your support.

  Hello

  The renaming of the option that is available and provided by the Windows Explorer is not to rename the external HARD drive, but the storage name will be changed only in Windows Explorer.

  To be honest I don't very well if you can change the HARD drive name that appears in the menu of the fritz m box.
  However, perhaps you could try to use the clean or clean all commands on a selected disk to remove all its partitions, MBR or GPT volumes and any information hidden on disk MBR sector.
  Details here:
  http://www.SevenForums.com/tutorials/52129-disk-clean-clean-all-Diskpart-command.html

  But use it at your own risk!

• How to read/write tdms 2.0 files with the TDM C DLL?

  Hello

  How to read/write tdms 2.0 files with the TDM C DLL?

  How consequently the datas in interlaced with the TDM C DLL mode?

  Thank you

  Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.

• MAX does not allow me to rename the tektronix oscilloscope

  Hi, I'm trying to set up my TDS 2014 C Tektronix oscilloscope, but I have a few questions:

  (1) I can't rename the Max machine (I have installed TekVisa).  Here is what I get (see the file attached jpg).  So, what happens here?

  (2) my scope is connected via USB and MAX sees, but all examples are for serial communication and I see no VI to the USB, but when you download the instrument driver, it said USB-compatible.  What should I do to get the examples running for USB?

  Thanks in advance...

  First of all, there is no reason Tek-visa application must be installed. You just need to NI-VISA, especially if you plan on using LabVIEW, secondly, how weak is slow? Seconds, minutes? What command do you send to MAX? Third, your scope is a USBTMC device and is listed as such. There is no specific to USB example since one is not necessary. The same code works for the GPIB, series, or USB. Ignore you the control of parameters series.