Replace VMHostID by host name

Similar Questions

• RVS4000 can it resolve local host names

  I just replaced my wrt54g with a rvs4000 on a mixed linux/windows network - one of the very useful features of the wrt54g is that to resolve host names on the local network (but with a non-Linksys firmware).

  Is it possible to implement the rvs4000 so that it resolve hostnames without having recourse to the 3rd party firmware?

  I realize there are options with static ip addresses, dnsmasq, samba, etc. - but it seems an obvious feature to be present on the router.

  Hey John,

  
  

  A large number of engineers and employees of Cisco keep an eye on this forum of the community, so suggestions or problems are noted and who knows, maybe that your suggestion will be used as a new deployment of a firmware or a product design.

• filter analysis interactive by "host name contains".

  I noticed that if you use the filter 'host name contains' and then only part of the hostname "server" (full host name is serverA.zone.mycompany.net, for example), he finds not all hosts.

  It seems that the host name is the analysis of the domain name FULL in parts (serverA, area, mycompany, net) and then apply it contains filter to each of them instead in its entirety instead to add a wildcard such as server *. If I do server * as my filter setting, it works fine.

  I just wanted to check if this is expected behavior. I have validated this in 2.5TP2 and 2.0GA.

  All LI queries are queries of complete keyword where a keyword is defined as any alphanumeric hyphen, or character. As such, serverA is a keyword, but the server is not. If you are unable to create a complete query with a keyword then you should replace the operator of contains begins with or use drops (for example server *). For more information, see my request construction series here: http://sflanders.net/?s=query+building+in+log+insight&submit=Go

• Homepage of database no. connect after changing PC host name

  I changed the host name of the computer recently in Windows 7 and since then, I am unable
  to connect to the oracle database home page, I tried to enter to change some iniialization oracle files, but they are
  locked. How can I save the new host name in oracle 10g XE?

  GabyPR wrote:
  I changed the host name of the computer recently in Windows 7 and since then, I am unable
  to connect to the oracle database home page, I tried to enter to change some iniialization oracle files, but they are
  locked. How can I save the new host name in oracle 10g XE?

  Hello Gaby,.

  You may need to 'operating system administrator' privileges to change these files. Run Notepad as 'administrator' file (right click and run as admin option), then open the files in Notepad.

  You can try to change the listener.ora and replace the old name to the new host, or you can simply add your old host for the 'c:\Windows\System32\drivers\etc\hosts' file name (if the old host name is not used by another computer on your network).

  Concerning

  Gokhan Atil

• HP Pavilion 360: How can I change the host name of files?

  I need to chance the host name of file on my PC I do not know how?

  Ok. Thank you. I'll give it a try!

• Breaking SMB permissions after the NAS host name change.

  Broken SMB permissions after the NAS host name change

  ReadyNAS 104 firmware 6.5.1

  Who can help me?

  I couldn't reach the NAS with Windows Explorer. Problem solved now.

• How to have a different DNS host name to the host name of VICTORIES?

  How to have a different DNS host name to the host name of VICTORIES?

  You are welcome-

  Chapter 18, "Dynamic Host Configuration Protocol (DHCP).

  http://redhat.activeventure.com/9/customizationguide/ch-DHCP.html

  Chapter 7 - resolution of host name

  http://TechNet.Microsoft.com/en-us/library/bb727005.aspx

  And, again

  TechNet Windows Server Forum

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

• Replace bundle bundle by name

  OK, so I have this code and here's what I want to do. I used the service bundle to organize sections of code and the flow of information in a submarine VI (I removed the sub VI for the purpose of this post). now, I want to replace a bundle by block name to facilitate the udate the code later if I need this block. So I want to replace this bundle

  

  and this bundle

  

  with the package by the name function. Nothing I have tried so far has worked. I think the problem has to do with the fact I want to put different type tables, References, and another cluster in the beam according to the name. Oh and I make sure that all possessed the names until I got tired of that, so I'm sure that's not the problem. Code is fixed, but be warned, its kind of a mess. Its my first big code and I need to clean it up, which is part of the reason I'm doing it.

  Any help is appreciated.

  John

  The thing with the bundle name is that he needs a cluster to go in as a def type.  So what I did with the right button on the thread of cluster, create constant.  The name of all the elements.  It's big, so as an icon.  The new cluster in the cluster of entry of all of the wire.  Right-click on the package and replace with package by name.  And all was good.

• IIS and sql server 2000/2005 if problems ip address and host name changed

  Windows Server 2003, IIS 6.0 + SQL SERVER 2000/2005

  Is there a problem if ip address and host name of the server is changed?

  for example

  IIS 6.0 may still work properly?

  SQL Server 2000/2005 can still start correctly?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• My hosts file has been corrupted, while I can't access certain sites like youtube or google etc, how do I replace a new hosts file?

  My hosts file has been corrupted, while I can't access certain sites like youtube or google etc, how do I replace a new hosts file?

  Hello

  The Hosts file and that it can do for you
  http://www.bleepingcomputer.com/tutorials/Tutorial51.html

  How to reset the default hosts file? -Mr Fixit methods and manual
  http://support.Microsoft.com/default.aspx/KB/972034

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Host name can not enter in the browser

  Hello

  I put my printer hostname to HP8600.   On my PC, I can't enter the host name in the url and the HP Web Interface will go up.   I am unable to do it with my Mac.   I can't get to it with the entry of the intellectual property.   I use Firefox on both browsers.   Do you know what could be the problem?   Thank you.

  David

  It seems strange, but it doesn't look like Mac will allow you to do.  I tested it on my own under 10.8.3 and it would not connect to my 8600 or my other printers using the host name.  It would connect using the IP address only.  It seems that just Macs do not support this feature.  I'm sorry.

• JO 6500 E70n-z keeps "forgetting" its host name.

  Greetings,

  I keep having to re-enter the hostname in my OfficeJet 6500 as he continues to go back to «new host»  I it back up when change you and I check it is correct.  But every day, it is up to «new host»  More annoying, any ideas?

  Hi there RWGFromMiss,

  I thank very you much for getting back to me. I would say at this time call your Internet provider to inform them on the issue of host name, that you are experiencing. Also, I suggest making sure that they check the router settings to make sure they are OK work with the printer. The parameters are listed below.

  Password and network name must have no space or punctuation
  If you are using WPA2 security, WPA Personal mode
  Double b/g/n wireless streaming (printer connect only to g.)
  MAC filtering should be disabled
  Firewall settings must be in there by default, settings or the value of lower security
  Multicast 'on '.
  There are the following ports not blocked:
  The incoming (UDP) ports: 137, 138, 161, 427
  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500

  Have a nice day

• Virtual host name

  We have one Equallogic running on a PS4100. I'm relatively new to the learning system so even my way around it. This could be a simple query.

  My question is this: we have an old server with 4 TB of data storage. Call the SERVER1. It is retirement due.

  I would like to move that data to the Equallogic, where I have plenty of room for it.

  However, we have many, many customers running many readers mapped to SERVER1. Instead of remapping all, which will have an age, y at - it a facility inside SAN HQ or group leader to give a virtual host name (which will be "SERVER1") and intellectual property to a volume? Pretty sure that our former NAS system a few years back was able to do this.

  For customers, the transition would be seamless - they would always connect to the same host name, only it is now hosted on the Equallogic rather than being a stand-alone server. I need to update the DNS entries and turn off the original Server1 completely of course.

  Hello

  # The berries of the PS Series by themselves are just s SAN storage device that use the iSCSI Protocol to connect servers to storage. .  They are not the NAS file servers on their own.  Dell offers a NAS device that fits completely into the SAN PS, known as a FS7600.

  Kind regards

  Don

• Availability of the critical apparatus report shows too many bars, not enough host names

  Hello

  The availability of critical devices report includes a graph showing the availability of each server in the selected period.

  On my report, I get 2 bars for each displayed hostname. Maybe the host names are not displayed as there a lot and the report is rendered for optimal playback.

  

  Even when export to HTML and looking at the source, host names are not available to extract and there is no option to export CSV. This is why I'm a bit stuck on how to generate a report with all the listed host names and their availability without going into the backend database.

  Any ideas?

  Hello

  What version of NMS are you running? The current version shows only one line per device. If you have upgraded and still see this behavior, pleaese reply to this topic.

  Thank you