Replacement DVD multi Drive

Similar Questions

• Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

  Hello

  I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

  Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

  Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

  I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

  Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

  Thank you

  Rich

  Hello rich

  Have you noticed the same problem after using Toshiba designed recovery DVDs?

• Qosmio G10 - 133 Question on replacement DVD COMBO drive

  Hello

  my laptop has a DVD driver UJ - 830B labled but the device Manager reports that it is a UJ-830. I posted before saying that I was not able to burn DVDs. He gets partially then error saying unable to burn. I used different software and drives done but all to no avail.

  I bought an external burner that burns without problems, but it defeat the object one integrated into the lapotop!

  Can anyone suggest a suitable replacement disk? I already tried a unit of NEC 5540 a disc, but my laptop does not recognize that it has been installed. I guess it's something to do with master/slave? If the laptop does not recognize the drive, I am obviously unable to Flash any firmware.

  Someone please help...

  Hello

  Seems that you have already noticed that the disc replacement is not so easy.
  The portable internal conduit don t support no rider like external drives for desktop PC as well as the settings are fixed and to my knowledge no editable
  I found a few compatible disk numbers, but unfortunately, I have not found the names of readers.
  It seems that these are the internal reference numbers.

  DVD Super Multi Drive
  -MATSU * A UJ830 (G8CC00021610)
  -MATSU * A (G8CC0001S610)
  Drive DVD Super Multi (Double layer support)
  -MATSU * A (G8CC00021611)
  -TEAC (G8CC00024611)

  However, the service partner may provide you with a compatible drive information.

• HP Compaq Desktop 6000 Elite: Replacement DVD-Rom drive with HP DVD + RW/CD-+ RW

  OK, I have a HP 6000 Elite with a DSVD-Rom (Multi Player) drive.  I would like to replace this drive with a model HP DVD + RW / CD + RW #447310-001. Drive TS-H653 410125-501.    Search for cases iside the PC, I find there's black wire to one (1) and a 1 connector with 2 black, a yellow, a red son.   No one knows it is all the cable/connector that is required for the DVD + RW / CD + RW drive market?

  I read where it is a connector cable BLUE on these units.  If so, where I buy this cable?

  Thank you

  Hello:

  Yes, you just put the existing cables from the old dvd drive to the new.  Nothing else is necessary.

  You can consider a used but tested and working one on eBay. Saves a lot of $$$ than buying again at HP.

  http://www.eBay.com/Sch/i.html?_FROM=R40&_sacat=0&_sop=15&_nkw=447310-001&RT=NC&LH_BIN=1

  When I buy off lease HP business PC that do not come with a DVD - RW drive, that's what I do.

• Satellite 5200 801: how to replace DVD burning drive?

  Hello
  A few days ago, I decided to replace my CD/DVD burning drive (burn DVD at 1 x) with a more faster and more modern.
  The problem is that, while turning on my laptop, it stops without any error message, as if she could not recognize the hard drive, so there is no professional Windows startup (problem of configuration master / slave?).
  I tried with two different burning drives and I also upgraded the BIOS of the laptop to version 1.40 (date 17/04/2003), but there was no result.
  Help me thanks
  Riccardo - Lecce - ITALY (South)

  You guessed it right,

  It's a question of master/slave/CS.
  Find out your old drive (firmware DI has something like 170) and try to locate the sense of them (current setting of M/S/CS) of it through the Internet on specific DVD player forums.

  Then determine WHAT type of disc, you will need to buy to make it work on your computer (or find the firmware suitable for do this... you'll need a different laptop that DOESN'T RECOGNIZE the DVD drive in the State, it is now).

  DVD Slimline portable computer readers usually do not come with a rider to make this adjustment (M/S/CS) on your own but are set with the internal firmware for this. There are other ways on how to get it to work (to force a shortcut on the back of the card), but I would not go for it if I were you.

  Concerning
  chain

• Equium L40 DVD Multi drive - do not burn files to DVD

  Hello

  Whenever I try to burn files to DVD discs using my dvd/rw drive, it holds in check the same point and comes with the invalid 'MS-DOS function' error. CDs write very well that it's just the DVD.

  Please could someone help with this problem?

  Equium L40 series
  Vista operating system
  My * a DVD-RAM UJ-850 s

  Hello

  What burning software did you use?

  I use Nero, and I've never had any problems!

• Satellite M100 - DVD-Multi drive not recognized as an engraver of CD/DVD (!)

  Hello

  After the installation of Win XP SP3 in the last update of windows, Toshiba tools, but also other CD/DVD burning software don't recognize this title, the drive from DVD - ram only as a CD-rom drive.
  Thus, software such as recordIt does not work.

  I have already deleted the drive in the list of material and have reinstalled.
  The driver being used is 'Mat * a DVD - RAM UJ - 841S'
  That's right, so far. But it's not burn CD/DVDs.

  A have you noticed this problem as well?

  Thank you.
  Bjoern

  Hello

  I think that it s a lower upper filter question and I think that you could solve this sequel to this instruction step by step.

  First remove the player of ODD (CD/DVD) from the list in Device Manager.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, you must restart the device.

  Once again, windows will recognize the STRANGE

• Satellite L500D - replacing the DVD - RW drive

  I have a model of Satellite L500D PSL T6A-015003. (portable)

  Recently I placed a CD in the DVD RW drive and the CD did not play.

  When I removed the CD, the disc of black Center that keep the CD etc up to were broken on the disk. The black disc was stuck in the CD I pulled out and a small piece and spring also fell out.

  Can I get a replacement black Center disk or do I have to buy a replacement DVD RW drive. If I have to buy a replacement drive, can someone please tell me where I can buy one, I'm in Toowoomba, Queensland, Australia.

  I have a few details to the reader, these are:

  HL data storage
  Super multi DVD re writer
  Model GT20N (7 7 ATAK)
  Serial number BOCRGTB831062

  I appreciate any help on this

  In my opinion, you should buy another ODD and of course identical. You have any important data on this piece of hardware so use Google and check if you can find an online store in your country where you can order.
  In the worst cases contact the nearest Toshiba service provider and ask if they can order it for you.

• EQUIUM A60: dvd multi writer

  I just got this laptop DVD says it's a dvd multi burner, but apparently not read the DVD.
  the guidelines mention 2 packs of software but these are not included with the machine the drive appears as a rug * a dvd - ram uj 820 s it will be with the correct software recording dvd - r and dvd + r and RW of what software I need and save data and digital photos

  Hi mad,

  Can you please write your serial number complete model (e.g. satellite a60 - xxx).

  In any case if you have new laptop it must be almost all preinstallation and your DVD Multi driver should work fine. As far as I know on your laptop is preinstalled burn program called SONIC RECORD NOW.
  You can also use another burning software. In this case, my suggestion is to uninstall the Sonic Software. It is possible that there are some conflicts if there are two applications.

  If you want to backup your data on DVD - RAM you don t need any software. Record does not now support writing DVD-RAM discs. DVD - RAM is like HARD drive. Put Virgin DVD-RAM in your drive, wait a second and copy your data on it. To record data on a DVD-RAM, open Explorer. Do not use of cut-and - paste. If there is some clerical error, the data will be lost.

  If you want to remove your data go to START > programs > DVD-RAM and there is utility that allows you to remove all data from DVD - RAM.

  Lots of useful information, you can find in the user s manual. It must be installed on your machine.

• A60-155 dvd multi burner no longer works correctly

  don't think I've had this laptop for a month yet. the dvd multi drive worked fine, but now it will play only DVDS but not CDs of any kind-it just read more or if she fails to pick up what is cd, it just turns and makes rattling noises. How can I get to recognize the CD and CD-Roms again?
  I tried to uninstall it and now the computer knows it's there, but the shortcut in my computer icon has disappeared, how can I get it back?

  Hello

  What shortcut you mean exactly? It is very strange that, shortly after, the material has this kind of function of failure. You did some changes or something that can be the reason for this? You can burn all types of CD?

  In my opinion, you should try to reinstall the OS using the recovery CD. If there is the same problem again, it may be a defect in the material.

• Sat Pro L10 DVD Super Multi Drive

  I have a new Satellite Pro L10 with DVD Super Multi player running XP Pro. I was not able to write on the DVD player - either it does not recognize the DVD in the drive or it blue screens and crashes when I use the Windows backup installation until I read the error message. Now I get very nervous, I could not support the 6 weeks I got it...
  I can play the pre-recorded (of movies) DVD in the drive and it can read CDs and some brands of DVD. The manual is singularly useless on the use/troubleshooting of the Super Multi drive

  Hi Christine,

  I don't think you can use the Windows backup to record directly to CD or DVD. The following is an excerpt from the Microsoft web site: -.

  • .......... Unfortunately, the Windows backup utility cannot save files directly to a CD - RW disc.

  Have you tried the software to burn DVDs. I think that you should have Sonic RecordNow and Windvd.

  HTH

• Tecra S3 and the replacement DVD drive

  Hello

  Portable model is Tecra S3 PTS30A-03E008
  DVD disc model is UJ - 832
  DVD player reference number is G8CC0002Q120

  The DVD drive no longer works and I'm looking to install a new one. Is the Toshiba Ultra Slim Bay DVD SuperMulti Drive
  Part number - PA3473U-1DV6 the correct replacement drive?

  Thank you

  Warren

  As I see in the paper manuals for your Tecra s user I can see two optical disk drives are listed as compatible:
  MATSU * A UJDA765
  MATSU * A UJ-832

  Reference numbers are not known to me, but I recommend you to use only compatible devices.

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• M30 - 107 - replace the DVD - RW drive?

  I replace the DVD - RW drive in my laptop. I was wondering if someone could tell me the steps that would be involved in it, or else where I might be able to find this information.

  Thank you!

  Hi Philippe,.

  Feliks is altogether correct with his comments about your request. Because the device is "fixed" in your notebook will invalidate you your warranty if you replace yourself.

  However, as with most laptops, CD/RW can be removed if you really want to. It is normally split into place and then fixed by one or two screws. For example, my A30 is secired by a single accessible screw from the base of the laptop. I don't know about the model M30 you need so you will need to check where it is attached.

  Once the screws are released, the unit can be slipped out of its slot.

  You should then be able to find the label on the device and this will tell you the serial number and model.

  If you are replaceing with a similar device, then you will probably have to remove the plastic frame and cut panels and mounting brackets and adapt them to the new unit.

  Replace the unit and the re - fix it with the screws and the work is done then.

  You can, of course, replace your device with another (Toshibe notebooks) do use several different, but there is no guarantee that you new unit will work properly without having to install new drivers for it.

  HTH

• DVD Super Multi Drive problem - cannot access any CD - Satellite A100

  Hi, 1st post:

  My Satellite A100 features a DVD Super Multi drive, which worked very well. However I cannot now access any CD - error message ' D: / is not accessible. The request could not be performed because of an i/o device error."is displayed.

  However I can still access DVDs without problem. Can anyone help?
  Thank you.

  can try this
  Right click on the drive w / the problem
  Properties
  Recording tab
  and then check the box "enable recording on this CD player.

  If this does not solve it you have Roxio Easy CD Creator is installed to check this
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

  or if you get an I/O device error message, this problem may occur when Windows tries to use a transfer mode that can not use your CD player
  RESOLUTION
  To resolve this problem, change the transfer mode for your CD drive in IDE channel properties. To do this, follow these steps:
  1. Click Start, right click my computer and then click on manage.
  2. under the (Local) computer management, click Device Manager.
  3. in the right pane, expand IDE ATA/ATAPI controllers.
  4 right-click the channel where your CD drive is connected, and then click Properties. In general, this channel is secondary IDE channel.
  5. in the Advanced Settings tab, in the zone transfer Mode for the device that represents your CD-ROM drive, click PIO only. As a general rule, this device is device 1. And then click OK.
  If the problem is not resolved after you change the transfer mode for the secondary IDE 1 channel device, your CD drive should not be located there. Use the same procedure to return to the DMA transfer mode if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the problem is resolved:
  Primary IDE channel, device 1
  Secondary IDE channel, device 0
  Channel IDE primary note, device 1 is connected to your boot disk. It's the hard drive that contains your operating system.

  hope that fix you :)