Replacement Vostro Slim Tower 200 front i/o USB Audio power switching Panel

Similar Questions

• Dell Vostro 200 Slim Tower - for SSD Samsung 850 Evo BIOS settings

  Hi - I am looking to replace the HARD drive in my Dell Vostro 200 Slim Tower with a Samsung SSD of 850 EVO.  I am running the BIOS 1.0.16 and do not see the option AHCI, RAID or IDE only.  Should what BIOS settings I use to optimize the performance of an SSD benefits?

  Thanks in advance for the help!

  I could get my SSD working under RAID (10 Windows) with the following steps (which some may not be necessary).

  1. MiniTool Partition Wizard Bootable 9 CD to clone a copy of the existing for the Samsung SSD HDD (Samsung data migration tool did not acknowledge the Samsung SSD on Windows 10, even though Device Manager it identified as such).  It took nearly 36 hours to clone froma 160 GB 250 GB HDD to the SSD.
  2. Replace HDD with SSD and it started / worked as an IDE drive.  TRIM has been activated and works.
  3. Apply the hotfix to the register noted in the first post of this thread (it may or may not be necessary):
     1. http://forums.HEXUS.NET/motherboards/112584-how-enable-AHCI-RAID-mode-without-reinstalling-Windows-P35-ICH9-ICH9R.html
  4. Downloaded the Intel Matrix Storage Manager 7.5.0.1017 A00 (which is appropriate for the Vostro 200 Slim Tower) from the Dell Web site and run the extracted exe file on the disk.
  5. Opens the folder where the drivers have been extracted and made a right click > install iaahci.inf and iastor.inf files.
  6. Restarted the PC, went into the BIOS and changed the IDE in RAID mode.
  7. When the system is booted, I received the message "Inaccessible Boot Device", so I let the system automatically restarts, go through the automatic recovery/repair options, then follow the guests to launch the advanced Windows options recovery to start in safe mode.
  8. Once in safe mode, I opened the Device Manager, which now showed the following new features:
     1. Disc players
        1. SAMSUNG SSD 850 EVO 500G
     2. Storage controllers
        1. Intel(r) ICH8R/ICH9R SATA RAID Controller
        2. Microsoft storage controller
  9. The system is then able to start and be used normally.
  10. There are still problems with the Samsung Wizard software, but it seems that it is a matter of Samsung.

  Hope this is useful to someone.

• Satellite X 200 PSPB9E - no display, start the power on sequence for 1-2 seconds

  Satellite X 200 PSPB9E - no display, starts to power on sequence for 1-2 seconds. This machine was bought as a defective donor known machine to fix the 'No power, no lights, Dead' problem with my PSPBUA.

  This problem was solved by replacing the NIVIDIA 8700 M GT K000052130 part number

  Thanks for the comments.

• replacement of the iPhone 6, front camera, bumps

  Hi all

  There are similar issues in the forum, but I guess mine is a little different.

  My iPhone still guaranteed 6a standart. Displaced front camera which is a common problem and phone turns off automatically when the battery is about 10%. When I plug the charging cable, it lights immediately. There are the problems of the phone.

  And there are a few bumps, scratches on the phone as below:

  .

  Are these cosmetics of dents or not? Apple repair or replace this phone?

  Warranty does not cover scratches or bumps.

  As for the battery, 10% is why iPhone is OFF to protect the battery.

  It is not advisable to drain your battery at all.

• the hard drive has been replaced in the Tower from my computer and now I need re - install windows vista but have no disk

  hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?

  Hello

  There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.

  And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop

  Contact HP and ask them to send you a set of recovery disks.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• Keyboard Slim magnet in front?

  I just got the slim keyboard and the first thing I noticed.

  Is he supposed to have before magnets so that the keyboard is attached to the front of the screen?

  Mine won't. The fact of the back.

  I have the mobile keyboard and my boy he has me spoiled for type.

  I'm spoiled by the mobile keyboard w / battery.

  Already set up the return to the slim keyboard.

  It worked better here but typing on this thing is terrible.

• Vostro 200, video card and usb ports

  I think that these 2 items will be adapted to my new Vostro 200, can someone confirm.

  BYTECC Site purchased but here Computers Canada

  and it's the video card, I was looking at, not for the game, I know:

  ATI RADEON HD 3400 bought but by computers Canada

  I use an E8300 processor with 2 GB of ram (soon to 4) and Vista Home Basic 32-bit.

  who's going to work.

  Thank you

  Message edited by brucered on 17/09/2008 14:18
  
  

• What size and where can find replacement for the 70-200 2.8 L IS lens screws?

  Three of the four live in my 70-200 2.8 L IS lens magically disappeared the same day... I can't find anywhere online, what size they are. I can't afford to send the lens in the Canon - I don't know if I can find the screws, I'm able to screw, lol.

  The screws in question are the in the ring closest to the camera body. Attached photo for reference. Thank you!

  

  http://www.USCamera.com/ef70200-28lis.htm

• HP Compaq dx-7300 Slim Tower b: SIMPLE COMMUNICATION CONTROLLER HAVE A PCI DRIVER

  
  

  Hello:

  You need this driver...

  This package contains the driver Intel Host Embedded Controller Interface (HECI) for access to Active Management Technology (AMT) initiative of the Intel Digital Office for rated desktop models and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34743.exe

  You may need to manually install this driver if auto installation does not work.

  To manually install the driver, go to Device Manager and click the PCI device needing driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34743.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• HP Pavilion 1423w: front of the USB 3.0 Hp Pavilion 1423w

  My front USB 3.0 ports quick it works of course me or my son forcing me the USB cable where it damage the teeth. I bought a lcd with two usb 3.0 ports fan controller with ect card reader port. Everything works except the USB ports. It came with a header 20 terminals, I have connect directly in 19 pins on my motherboard header. It also has a slider pin 2.0 9 USB and I have some that I have only plugged in the correct place also. I even tried it in different places around switching. I bought an additional USB 3.0 front with two ports and is a strip to 19 pins I tried o have nothing! "So I tried to correct the teeth in the original that he came with, I got them as straight as I could, then I plug this header 19 pins and what you know", it worked! Temporarily of course teeth in the pendrive has been damaged to bad. But she recognize him at this moment. Any suggestions?

  All can be replaced. This is the part # is 67187-008.  An example and the cost can be found here or here.

• Satellite X 200: is it possible output audio 7.1 HD-DVD on HDMI

  Hello

  just wondering if anyone can confirm if/how it is possible to output 7.1 channels via the HDMI port on the portable X-200 (20 years)?

  It seems that Toshiba HD-DVD player allows only 5.1 selectable channels in the audio settings.
  Thinking about upgrading my audio/video receiver, but may not bother with support 7.1 if my X-200 can't get out.

  See you soon

  Hello

  As far as I know HDMI is a transfer of audio and video data, and it is designed to be used with a HD TV. Can you connect 7.1 audio system to your TV? Or can you connect an HDMI cable to audio/video receiver?

  To use the best sound quality, you must use optical cable. Please refer to the manuals of s. If I remember well there you can find the article how to use S/PDIF port.

• CANVIO SLIM - 2.5 "- 500 GB - SILVER - USB 3.0 driver"

  Hey everybody. I am looking for a SLIM CANVIO 2.5 "- 500 GB - SILVER - USB 3.0 driver for my Macbook pro." I can't get date part part Driver Downloads. Does anyone know how to get around this problem?

  See you soon

  I assume you are talking about this HARD drive
  http://www.Toshiba.EU/hard-drives/portable/Canvio-slim-for-Mac/hdtd205esmda/

  It is a USB HDD and it requires no driver

  But he needs Max 900mA power (its USB3.0). This means that a USB 2.0 port common provides 500mA alone and probably you use a Y USB cable to connect the 2 USB ports HARD drive.

• SHOCK: X 200 noise (no fan) with different power settings

  Machine very quiet in general. But finding a question important 30 min after my hands on it:

  When I switch the power Off timers for setting, I heard very loud noise of current electric, close to the battery (upper part of the keyboard). I thought it was something unique to 'Timers Off', but towers was not released. I saw occasional same question with "Max Performance" / / "Energy Saver" etc.

  It is NOT the power adapter. He SPRING of the machine itself. Is not related to what you use the speaker or headphones. No partner that you were using the adapter right battery or sector.

  BTW, I just opened the box and did the Windows updates. No related software. No matter which firmware questions here?

  Any comments?

  Thank you!

  With the help of Mark, Lenovo responded effectively to try to resolve the problem. The technician and I think it is the LCD inverter noise. However, at least the special inverter we replaced the former with does not seem to solve the problem of my day 2 experience after replacing...

  The machine works fine except for this standby failure noises, Hibernate slow Vista Vista and sometimes.

  The noise recorded using the built-in microphone is like that. It does not systematically refer to the a/c adapter / battery use. Regardless of the CPU, video, ram, HD use.
  https://netfiles.uiuc.edu/xzhuang2/shared/noiseafter_inverter_replacement.WMA

  UPDATE: with the help of Mark, Lenovo finally sent in a replacement machine. The new machine seems to be free of the noise of the ups, at least for now. I hope that it was only an isolated case. Thank you, Mark!

• A 200 - 3 small buttons by the power button has stopped working

  Win XP, SP2, 1 GB memory, nothing too special.

  These cute little buttons have stopped pulling up of software. The only function seems to work is that next to the switch lights up the machine!

  Any ideas?

  The only recent change is that I've recently updated Microsoft Office 2003.

  The buttons ARE set to launch software.

  Hello

  Well, I put t know why it doesn't work, but these 3 small buttons are controls of Toshiba.
  Have you tried to update the driver controls? You can find it on the Web from Toshiba site

  http://EU.computers.Toshiba-Europe.com and support & downloads.

  In addition, you can check the settings. I m not sure but I think you can find them in the Panel.

  Good bye

• STOR. The SLIM E 2.5 500 GB USB 3.0 SILVER - no access

  Dear Toshiba forums,

  I have an external mass storage device Toshiba (S3600) password protected and has always worked and been a good product.

  However, my Toshiba laptop recently had a crash of the operating system. It was then fixed and re - establish.

  Since the repair, I was not able to access the device S3600. My laptop can be seen in the devices list, I can't see it as a drive on my computer.

  I also tried the device on another computer and I don't know if its a coincidence, but I encounter the same problem.

  Can anyone help as I have very important content on the device I need to access?
  I thank all those who can help or give advice.

  Thank you very much
  Tim

  Toshiba storage device external mass (S3600) isn t I known
  How it s connected to the laptop?

  You said that this device is password protected.
  This is probably the reason why the device is not available.

  Did you use special software to set this password?
  Have you tried to remove it, and then reconnect to the laptop?