Report parameter problem

Similar Questions

• I'm supposed to receive a confirmation email after reporting a problem with an in-app purchase?

  I reported a problem two days ago, but never received a confirmation email. I wasn't no one expected a super fast response, but I was wondering if I wasn't supposed to at least to get some sort of verification that I presented a report.

  It may take 5 to 7 business days to receive an answer by e-mail.

• Gmail, the opening in the latest version of Firefox, immediately connects me back. IE does not. And why is there no place to actually report a problem?

  I have a problem after updating Firefox to the latest version. I log in to gmail and I am immediately disconnected return. It does not work in Internet Explorer. I have no other Google open product. I am not connected to other Google products.

  I wanted to report this problem but I can't find a place to do that, so I guess I post here and we'll see.

  Finally! It works again. I don't know why, but it seems that I was not getting the allowed cookies even if I remove everything so I had no cookies for all sites. I continued to do that and close my browser. I also removed Google.com as one of my homepages. One of these things fixed the problem.

  I thank very you much for all your brain power and help.

  Kind regards
  Sheryl

• 'report a problem' in itunes is no longer works. How can I request a refund?

  'Report a problem' in the past section section purchases account for Itunes, there is a reaction. Tried twice. Is there another way to request a refund?

  You can try to contact iTunes Support via http://www.apple.com/support/itunes/contact/ or https://www.apple.com/emea/support/itunes/contact.html

• Unable to connect to the Web site of 'report a problem '.

  I'm having a strange problem signing on the Web page 'Report a problem' in order to report a problem with an application that I downloaded via the iTunes store. I went to purchase in the iTunes store on my computer, click report a problem for the application in the order and he took me to a Web page called 'Report a problem' and asked me to connect.  However, I enter my information and click on connect, but the page just refreshes and doesn't connect. I know that my sign in information is correct (in addition to using it in iTunes, I just used to login here to post this question) and I came many times to just in case there was a typo in with my password.  I tried a longer password and it gave me the error "your AppleID or your password was entered incorrectly" so he is grateful to my info... I tried to clear cookies and cache from my browser (Chrome).  I also tried to use Internet Explorer and Edge to connect, but both had the same problem.  I couldn't even find a way to contact Apple on this specific problem... their support menus not occurred for problems of website that I could find at least (if someone could point me to that, I can try that as well).

  I had no problem connecting to https://reportaproblem.apple.com/ earlier. A temporary glitch perhaps?

  TT2

• How can I encrypt a drive where cs diskutil convert reports 'a problem', let the unreadable disk?

  I try to encrypt my Time Machine backup volume, but diskutil refuses and leaves the disc unreadable (but fixable using Linux).  How can I proceed?

  It is a disc of TB USB3 Western Digital Elements 107 3.

  It has one HFS partition + and works very well.

  diskutil verifyDisk and diskutil verifyVolume don't report any problems.  I also used Alsoft DiskWarrior to repair inconsistencies, without problems.

  If I try to convert the volume, diskutil report 'a problem', like this:

      rb@Silverbird$ /usr/sbin/diskutil cs convert /Volumes/RB3TB1/
      Started CoreStorage operation on disk4s2 RB3TB1
      Resizing disk to fit Core Storage headers
      Creating Core Storage Logical Volume Group
      Attempting to unmount disk4s2
      Switching disk4s2 to Core Storage
      Waiting for Logical Volume to appear
      Mounting Logical Volume
      A problem occurred; undoing all changes
      Switching partition from Core Storage type to original type
      Undoing creation of Logical Volume Group
      Reclaiming space formerly used by Core Storage metadata
      Error: -69842: Couldn't mount disk
  

  This leaves the unreadable disk.  diskutil cs list shows the drive as a basic storage volume that is "online" and "reversible" but it may not be mounted or acted on, nor can the physical volume of the parent.  Disk utility crashes at startup when the drive is connected.  diskutil repairDisk on volume of parent reports:

      Repairing the partition map might erase disk4s1, proceed? (y/N) y
      Started partition map repair on disk4
      Checking prerequisites
      Problems were encountered during repair of the partition map
      Error: -69808: Some information was unavailable during an internal lookup
  

  In fact, all access to the disc seems to be broken at this point.

      rb@Silverbird$ sudo /usr/sbin/gpt show /dev/disk4
      gpt show: unable to open device '/dev/disk4': Input/output error
  

  You cannot read the device using hexdump.  The kernel seems mightily confused.

  I was able to recover the disc mounting Linux using the utility 'gdisk' to change the partition type to AF02 (storage of carrots) to AF00 (HFS +).  After that, diskutil checks the disk so the volume as OK.

  I think that Apple has a bug where diskutil fails to return the partition type.

  But this me no bugs more closely to encrypt my backup volume.

  Anyone have any idea what might be the 'problem' and how do I proceed?

      rb@Silverbird$ /usr/sbin/diskutil info /Volumes/RB3TB1
        Device Identifier:        disk5s2
        Device Node:              /dev/disk5s2
        Whole:                    No
        Part of Whole:            disk5
        Device / Media Name:      RB3TB1
   
        Volume Name:              RB3TB1
   
        Mounted:                  Yes
        Mount Point:              /Volumes/RB3TB1
   
        File System Personality:  Journaled HFS+
        Type (Bundle):            hfs
        Name (User Visible):      Mac OS Extended (Journaled)
        Journal:                  Journal size 229376 KB at offset 0x8f07408000
        Owners:                   Enabled
   
        Partition Type:           Apple_HFS
        OS Can Be Installed:      Yes
        Media Type:               Generic
        Protocol:                 USB
        SMART Status:             Not Supported
        Volume UUID:              F096E831-F27D-3433-9BBE-6B65F4F69FA5
        Disk / Partition UUID:    FE09034E-6AA0-4490-82A1-1F7E894ACD91
   
        Total Size:               3.0 TB (3000110108672 Bytes) (exactly 5859590056 512-Byte-Units)
        Volume Free Space:        78.1 GB (78142939136 Bytes) (exactly 152622928 512-Byte-Units)
        Device Block Size:        4096 Bytes
        Allocation Block Size:    4096 Bytes
   
        Read-Only Media:          No
        Read-Only Volume:         No
   
        Device Location:          External
        Removable Media:          No
  

  The disk contains files of about 732000000, according to the disk utility (in reality the directory entries).

  This is OS X 10.11.2, day, based on a new install of OS X 10.11 last month.

  Hello RPTB1,.

  Thank you for using communities of Apple Support.

  I see that you are wanting to encrypt your Time Machine backup disk. I see you are trying to do through Terminal or Unix command line, have you tried to use it through the Time Machine configuration and preferences? Take a look at this article and see how it works for you.

  OS X El Capitan: choose a backup drive, then set the encryption options

  Best regards.

• 'create an analogue' control by programming of the cyclical report parameter

  I need to generate a square wave and a programmable duty cycle in LabView (not SignalExpress).  I use 'Create an analog Signal' for a signal fixed duty cycle but I can't figure out how to get the setting of market factor to change it programmatically.  I was hoping for something like node property access but found that this works for objects on the front panel.

  Is it possible to dynamically change the cyclical report parameter in the "create an analog Signal?

  Fortunately, I found the Wave.VI place, what more accessible inputs for things like the work cycle, amplitude, frequency, phase and gradually - all the parameters of the desire of my heart.

• Error: Code 43; Windows has stopped this device because it has reported a problem whiel trying to use Cyberlink Webcam

  Title: cannot activate cyberlink webcam

  My cyberlink webcam was working fine until today. It will not turn on. After you apply the troubleshooting suggestions, I received a reply as follows: 'windows has stopped this device because it has reported a problem. (code 43) What is - this and how to solve my problem. I have a HP Pavilion g6. Help, please!

  Hello

  -Did you do changes on the computer before this problem?
  -What is the operating system installed on your computer?
   
  The error code you get is due to one of the engines that controlling the device notified the operating system that the device has failed in some way.
  Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: Uninstall and reinstall the USB controllers
  You can try to uninstall the drivers and also scan for any hardware changes in Device Manager.
  (a) open Device Manager by clicking Start , and then type Device Manager.
  (b) expand the Controllers of Bus USB section by clicking on the '+' sign.
  (c) Uninstall each of the devices under the USB Controller section by right-clicking on each one, and then click Uninstall.
  (d) close the Device Manager and restart the computer.
  Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.
  For reference:
  Updated a hardware driver that is not working properly
  http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Method 3: If the problem persists, I suggest you to follow the steps from the link and check if it helps.
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx
   
  Hope this information helps.

• When I went to open Outlook Express a pop-up message reported a problem and said he had to close (which is). Since then, I was unable to open my mail.

  When I went to open Outlook Express a pop-up message reported a problem and said he had to close (which is).  Since then, I was unable to open my mail.  What can I do?

  original title: exit express does not open.  What can I do?

  If Outlook Express does not open, Folders.dbx is corrupt.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• I get this when I try to send e-mail with an attachment that Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Windows Live Hotmail could not send your message because the server was busy. Please try again later. Please report this problem to Microsoft.

  Hotmail as well as all the problems of Windows Live are Windows Live Solution Center. It's their jurisdiction.

  Please post on forum discussions for Hotmail:
  http://windowslivehelp.com/forums.aspx?ProductID=1

• where can I report a problem with a virtual machine died, which I can't save now?

  It looks like a lot of places, but it is not clear where I should take this problem to.

  where can I report a problem with a virtual machine died, which I can't save now?

  He is buried in the VMware Community Infrastructure - here is the link to this forum - http://communities.vmware.com/community/vmtn/server/vi/esx3.5

• Report parameter

  Hello
  I've created an interactive report. Now, I want to create a command prompt in the report... How can I do this? can I add a confirmation or the classic report parameter?
  
  Thanks in advance!

  1 create a text field
  2. Add a button to send the page
  3. Add a where clause clause to your example query
  WHERE UPPER (mycolumn) LIKE '% "| UPPER(:PX_MY_TEXT_FIELD) | "%' OR: PX_MY_TEXT_FIELD IS NULL

• Add all the records in the report parameter

  I am trying to create a report parameter using a lov.
  You can choose a single element or to return all
  
  Is the source of my lov

  SELECT l.extkey||' - '||l.longdescr a,  l.clocid b
  from udm_cloc l, udm_cust c, udm_lde lde
  where l.custid = c.custid
     and c.ldeid = lde.ldeid
     and lde.ldekey = :F140_LDEKEY
  and l.closedate is null
  and l.orddcid = :P9_DCID
  union
  select 'ALL Records' a,'ALL' b from dual
  ORDER by 2

  But I get an error message
  "LOV query is not valid, a display and a return value is needed, the column names must be different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online. »
  
  Any ideas?
  
  Gus

  Central unit that

  AND ((clocid =: P9_CLOCID) OR)
  (NVL(:P9_CLOCID,'-1') = '-1'))

  Why are putting you clocid is null? Take everything you you select ALL your requirement.
  The condition would be NVL(:P9_CLOCID,'-1') = "(-1').

  Thank you
  Mehabub

• What is the problem with my Oracle reports parameter?

  Hello

  We use a PL SQL package that allows the user to select the report you want Oracle and associated parameters.   While the control is passed to Oracle 11 g reports.

  The requirement of one of the reports is to enable more detailed codes be selected by the user and then shown.  The detailed code is an alphanumeric field that can hold between 4 and 6 characters.

  If my data model looks like this

  SELECT student_id

      FROM my_view

     WHERE detail_code IN :p_detail_code;

  and the parameter that I'm passing to Oracle reports looks like this (when I view the source HTML code)

  & p_detail_code =('1001','1002')

  so no record is selected.

  However, if my data model looks like this, I get the records you want:

  SELECT student_id

    FROM my_view

  WHERE detail_code IN ('1001', '1002');

  We have Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.

  Please tell me what is the problem with my setting.  Thanks a lot for your help.

  This isn't how you can use in. See this example on how to solve it with the digital settings. If your setting is a character, you need to change this.

  In fact, when you simply enter 1,2,3 as an input parameter, you actually create this query:

  Select *.

  from my_table

  where num_column in ("1,2,3")

  Use rather a lexical parameter:

  Select *.

  from my_table

  & p_where

  In the parameter after relaxation shape, build the lexical like this:

  :p_where := 'where num_column in ('||:p_param||')';
  

• Conc program with the direct report parameter

  I have a report of simultaneous program which takes a person_id as a parameter. Currently, he is executed for the user logged in with a declaration of default SQL query:

  SELECT papf.person_id
    FROM fnd_user fu, 
         hr.per_all_people_f papf,
         hr.per_all_assignments_f paaf
   WHERE fu.user_id = fnd_profile.VALUE ('user_id')
     AND fu.employee_id = paaf.supervisor_id
     AND SYSDATE BETWEEN papf.effective_start_date
                     AND papf.effective_end_date;
  

  Now I have to do is set up a copy of the same program so that a manager can run it. The person_id parameter must be chosen from a list of direct reports to the Manager only, using fnd_user user_id of the prime contractor for the list.

  Need of a query for a supervisors direct reports. Thanks in advance.

  OK, basically what you have to do is reference tables as a list, with aliases for tables - then where clause is put in the ' where / order by ' window. So many fields:

  Table name: fnd_user fu, ADP, women's wear per_all_people_f per_all_assignments_f

  Value: papf.employee_number VARCHAR2 20

  Meaning: papf.full_name VARCHAR2 100

  ID: papf.person_id NUMBER 15

  Where / order by:

  Fu.user_id = fnd_profile. VALUE ('user_id')

  AND fu.employee_id = paaf.supervisor_id

  AND papf.person_id = paaf.person_id

  AND paaf.assignment_type = 'E' - assignment of the employee

  AND trunc (sysdate) BETWEEN paaf.effective_start_date

  AND paaf.effective_end_date

  AND trunc (sysdate) BETWEEN papf.effective_start_date

  AND papf.effective_end_date

  Note that the second query I posted earlier would have failed because I do not understand the per_all_people_f of the table in the table list. This problem has been corrected here.

  In the first screen, the Type of Format it number, because you have specified a column ID that is digital. The concurrent program will pass the ID column, if it is made reference, otherwise, it will send the value column.

  Once again, please keep in mind that I can't try myself to check the absolute rightness of what I posted here, but it should be close enough.

  Hope this helps

  Clive