Reports - pipeline unable to select data
Hi all
I use version V9.0.10
I'm trying to add a chart to a report I wrote and couldn't get data pipeline option on the data source tab when editing the series.
I even had the guide student report designer and follow-up steps here and was still unable to choose a data pipeline (see image)
Has anyone else had this problem or had any ideas on this?
Hi ianporter,
There are two types of control Chart inside the VSM (generator of reports) report - chart and DBChart:
I believe you are trying to use the first, but just on the other can be specified as the source of data data Pipeline.
Concerning
Gytis
Tags: VMware
Similar Questions
-
Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide
Hi Anandsable,
The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:
http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.
Hope the helps of information.
-
How do I edit/change data type on the report which has been selected by mistake
HelloI've created a report in the APEX and a column is in error because the data type of a supposed to be a varchar2 column, but somehow the report was created with a data type Date. I want to change the data type without re-creating the whole report. Can anyone help? I tried to edit the report but could not be able to understand.
Help...
I found a solution for this, I thank you.
-
"Unable to send data to the printer.
I have a HP deskjet F4440 printer. He has always fought linking to our Mac. We restart the printer or the computer often to do print, but after doing one or the other it would work normally. But now it doesn't connect at all.
I uninstalled and reinstalled the printer. I downloaded and installed the software from the apple support Hewlett-Packard printer. I restarted my computer, uninstalled and reinstalled my printer. It presents itself as "in use" but says "Unable to send data to the printer" when I try to send a simple text of pages for print test. When I try to scan it shows that the scanner is connected, initially said "waiting for scanner", then 'scanner is not available' stops.
Do you have any suggestions? Thank you!!!
Hi mandi820,
Welcome to the HP Forums! I see that your HP deskjet F4440 printer has difficulty to connect to your Mac. I'm happy to help you with this problem of connection! I have a few questions for you:
- What version of Mac OS X are you using? OS x: find your OS version and build information.
- How is the printer connected? Wireless, or USB?
- Can you make copies with the printer?
- The cable is connected to a surge protector or directly on a wall outlet? Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.
- You can print a self-assessment report extended? Print a self-test report extended.
Hope to hear from you and have a great day!
-
Unable to transfer data from the laptop hard drive external/pendrive.
Dear Experts,
Unable to transfer data from the laptop hard drive external/pendrive.
Each time that tried to transfer meesage seems to the authorization of the administration.
Kindly help me to solve the problem.
Concerning
Hello
Follow these steps and check:
To take ownership of a folder
a. click on the USB key you want to learnand then click on Properties.
b. click on the Security tab, click Advanced and then click on the tab owner.
c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
d. click on the name of the person you want to give to the property.
e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.
f. click on OK.
-
why I'm unable to copy data to the USB in windows 7
why I'm unable to copy data to the USB in windows 7
Hello
You don't say how you try to do.
You can right click on the data you want to copy to the USB > hover the mouse on send in the list > in the Sub Menu that appears choose the USB by clicking left on it and the data must be copied to it.
It is also to select the data you want to copy > press Ctrl + C > click in pen drive > press Ctrl + V
Another method is to drag and drop the data from one drive to another.
See you soon.
-
Create the form for selecting data in multiple tables
Hello
I'm getting APEX for the first time and I just read 2 days dev Application Express guide
I tried to play and I can't create a report with the form that select data from several tables
What I want to achieve is a report we'll say 'USERS' makes MANAGER_ID ID, NAME, with a form that allows me to create, delete, change users
The problem is that, once the report with the form created, if I click on create (to create a user) it will ask me for id, name, and manager_id
I need a water drop down which allows me to select managers in the table manager instead of manually insert Director id
How do I do that?
Thank you!
HI Chris,
LOV will use this magic.
Search:
Kind regards
BEnjamin
-
the detailed report based on the selected value
Hello experts,
I use 10g obiee.
I have a requirement were on the dashboard there are 4 guests say product, region, year, color.
All are select muli-value prompt.
on the dashboard, there is a synthesis report that reflects the value according to the selected data from the command prompt. His work so far.
Now below the customer wants a link that has the title of 'detailed report '. When they click the hyperlink, they want to see detailed but it show only the values selected in the command prompt.
They claim as detail as there are more number of columns found in the report detail than the summary report following.
Can we can suggest me how to achieve in 10g.
Thanks a lot for your help.Hello
Just add your detailed report to the dashboard as a link or an Image and keep the required columns, you are invited into the report. It should work.
Thank you
Gerard -
publish a report based on the selection of the radio button.
Hello
Any1 can help me on the below scenario?
I have a dashboard command prompt that contains criteria below.
Date of beginning of end and two boxes button (A, B) - what are created using 'variable prompt' and there are two reports (Report_A, Report_B).
Cond1: Report_A should open if I select the option button "A".
Cond2: Report_B should open if I select the option button 'B '.
Thanks in advance!Hello
keep report_A in separate section and Report_B in a separate section and apply condition of the article on him passing the variable presentation. so when the user select an option then only Report_A button is displayed.
Follow this link to reach the requirement.
http://Shahin-OBIEE.blogspot.in/2012/04/switching-between-multiple-reports-in.html
Select this option if useful/correct.
Thank you
-
Deleted lines flashback: unable to read data - table definition has changed
Hi all
Its really Important.
I unfortunately truncated a table using
Trancate table mytable;
and made an alter table to reduce the length of the pricision data.
But I need back data of tabla
I used the command to get the deleted lines, below, it shows error.
query: select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
error: ORA-01466: unable to read data - table definition has changed
query: flashback table pol_tot to timestamp systimestamp - interval '45' minutes;
error: ORA-01466: unable to read data - table definition has changed
Well want to share your ideas how can I deleted thoose Records.
Edited by: 887268 July 8, 2012 12:26This
and Made a alter table to decrease data pricision length.
is the cause of your error.
Now please do what is obvious.
-------------
Sybrand Bakker
Senior Oracle DBA -
Display buttons in a region report only if there is data in the report
Hi friends,
I have a region of report in which there is a report, 2 buttons and a text field. I want to show these buttons and
text field only if there is data in the report. How can I do this? Help, please
Thank you
TJHello
Define buttons conditionally as Exists (SQL query returns at least one row). The same use and the WHERE clause as your report, but change the SELECT part
SELECT 1
BR, Jari
-
Unable to select the file in the dialog box in the Sierra
I'm unable to select an image file in the "save for Web" in the finder window "save under" in Photoshop CC running on the Sierra.
There are times where I need to save a new image using a similar name by selecting the existing file, which matches the name in the dialog box "save under".
The use of Photoshop CC in Sierra I am unable to do so due to the inability to select the existing files in the Save-as the finder window.
I thought at first that was Adobe, but later, I noticed that I can not save for web browsers and other programs. I installed the beta updates on Sierra, but also which did not set. I hope be fixed so I can move on to Sierra. It was not such a problem in previous versions.
Unfortunately, your discovery is correct. I just met for the first time. I was shocked, but apparently it will work in list view. View miniature not a reason any.
-
I'm so sorry to bother the community, but I'm on day 30 Final Cut Pro X trail, and I'm a novice, but have some web design background, so not as green... lol... when I try to resync video of may, I am unable to select the speed. It is grayed out.
How can I not grey this area and choose my speed?
I have highlighted in yellow video, so that it knows which clip I want change, but I am u can select a speed for example 2 X, 4 X etc...
Please help me!
THX,
Hai,
You can show us a screenshot of it please?
Also, try the reset speed option(Option+Command+R). Let's see if that will work or not.
-
Y510 unable to get data from the camera.
Hello
I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.
Thank you
Peter
I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.
-
System Restore will not restore the selected date, even if the date is in bold in the home
It just says: cannot restore the selected date
Usually, this is caused by your anti-virus program is interfering with the system restore. Norton is especially guilty of this behavior. Try restarting your computer in Mode without fail (repeatedly tap key the F8 key during the restart of the computer), and then perform your safe mode system restore. When it restarts after you perform the restore, allow him to start in normal mode.
HTH,
JW
Maybe you are looking for
-
The font size has changed in Messages?
Were there an update that changed Messages recently in El Capitan? Messages now use a tiny font same size when changing the size in the preferences. Suggestions?
-
"Re: Toshiba M10: replacement 7 k 200 with Advanced Format HARD drive" 7 K 750 HDD
Can we see problems with the replacement of the original Hitachi TravelStar 7 K 200 (200 GB) HDD, that went into my two year old Toshiba Tecra M10 - 11 X, with a so-called 'Advanced Format' 7 K 750 (750 GB or maybe 640 GB) hard drive? Like the origin
-
The fan runs with heat bad open case sensor?
I have a HP Pavilion 670 y. I have a fan that works for long periods of time and then stops then starts again. I decided to run my computer with the case open to make sure which fan was working before you buy a new power supply, if it is the fan. F
-
problem with the bytes to port to read in VISA
Hi guys,. I'm reading device data using usb - BT dongle. It creates the virtual port and read without problem. My problem is the packages to send 428 bytes, inside this block device, I have 400 bytes of data bytes 9 to 409. The first 3 bytes of each
-
My children HP Mini won't start. Just triies, flashes and displays gray screen with cursor flashing at the top left, then repeat the cycle. I think I need to reload Operatin System. Where can I find a copy of the operating system at a reasonable pric