The fan runs with heat bad open case sensor?

Similar Questions

• Battery Tecra M11-130 with not power and the fan runs constantly

  We are having a problem with the battery on one of our laptops. When left for an hour or two the laptop turns off because the battery is dead. We have mounted a battery new but still only get about 1.5 hours.
  In addition, the fan runs continuously. I looked at the PC Healthcheck software which shows as follows:
  * Power *.
  Other costs 14%
  40% of energy consumption system
  Good battery
  * Temperature and fan *.
  CPU temperature 67%
  System internal temperature 56%
  88% fan speed

  I would like suggestions.

  > We have mounted a battery new but still only get about 1.5 hours.

  1.5 hours is a common value, you should consider that dough working time depends on its portable use.

  Battery needed to dump a lot faster if the CPU would be stressed out a lot in your case, that something could run in the background, lose power CPU performance and the dough.

  In addition, you said that the fan runs constantly this could discharge the battery too.
  Therefore, it would be interesting to know what process emphasizes the central unit.

  Start the Task Manager and check the processes tab. In the CPU column, you can find the process that emphasizes the central unit.

  In addition, to change the settings for the CPU performance and cooling of the activities in the options of Win 7 powers that would help to increase the performance of the battery.

• do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

  I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

  Hello

  Follow these steps:

  
  Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.

  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Step 2: disable the Option "Allow this device to wake the computer" for a device

  a. open the control panel.
  b. click the Device Manager icon.
  c. click on continue in the UAC prompt.
  d. right-click on the network adapter and click Properties.
  e. click the power management tab.
  f. uncheck allow this device to wake the computer.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• iMac very slow and short HOT.  the fan runs almost constantly

  My iMac 2011 short middle slow and often gets "the ball" of the computer runs hot (uncomfortable keep the hand on top) and the fan is almost always running.  Activity monitor shows the low CPU usage. Any ideas?

  EntreCheck report is due to:

  EtreCheck release: 2.9.4 (254)

  Report generated 2016-02-18 12:04:46

  Download EtreCheck from http://etrecheck.com

  Time 03:31

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  iMac computer is slow, get the beach ball often enough and the fan runs almost constantly because the computer heats

  Hardware Information: ⓘ

  iMac (27 inch, mid 2011)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac12, 2

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X Yosemite 10.10.5 (14F1605) - since the start time: about 5 days

  Disc information: ⓘ

  WDC WD1001FALS-403AA0 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (577,56 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  HL-DT-STDVDRW GA32N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  HP Photosmart 8400 series

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  Apple internal memory card reader

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (1.5.1 - 2016-02-09) [Support]

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.4 - 10.4 SDK - 2016-02-09) [Support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.4 - SDK 10.5 - 2014-01-27) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

  Startup items: ⓘ

  HP USB EWS Gateway: Path: Library/StartupItems/HP USB EWS Gateway

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  com.apple.AirPlayUIAgent.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.EscrowSecurityAlert.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.cmfsyncagent.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.photolibraryd.plist [killed]

  com.Apple.printuitool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.SBD.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 141 tasks Apple

  [operation] 58 tasks Apple

  13 killed process lack of RAM

  Launch system demons: ⓘ

  com.Apple.awdd.plist [killed]

  com.Apple.ctkd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.icloud.findmydeviced.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.nehelper.plist [killed]

  [killed] com.apple.periodic - daily.plist

  [killed] com.apple.periodic - weekly.plist

  com.Apple.wdhelper.plist [killed]

  [loading] 173 tasks Apple

  [operation] 80 tasks Apple

  9 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.maintain.CocktailPurgeInactiveMemory.plist (2013-11-21) [Support]

  [failure] com.maintain.CocktailSystemEvents.plist (2012-07-08) [Support]

  [loading] com.maintain.LogOut.plist (2014-02-17) [Support]

  [loading] com.maintain.Restart.plist (2014-02-17) [Support]

  [loading] com.maintain.ShutDown.plist (2014-02-17) [Support]

  [loading] com.maintain.Sleep.plist (2014-02-17) [Support]

  [operation] com.maintain.SystemEvents.plist (2014-02-17) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-01-28) [Support]

  [loading] com.maintain.CocktailScheduler.plist (2016-02-18) [Support]

  [operation] com.memeo.WDMemeod.plist (2007-07-30) [Support]

  [loading] com.rogueamoeba.hermes.plist (2010-09-28) [Support]

  User launch officers: ⓘ

  com.apple.MobileMeSyncClientAgent.plist [failure]

  com.apple.SafariBookmarksSyncer.plist [failure]

  [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

  [operation] ws.agile.1PasswordAgent.plist (2013-12-07) [Support]

  Items in user login: ⓘ

  iTunesHelper UNKNOWN (missing value)

  HP Photosmart Menu Application (/ Applications/Hewlett-Packard/Photosmart/HP Photosmart Menu.app) (2006-10-22)

  Airport demand of basic Station Agent (/ System/Library/CoreServices/AirPort Base Station Agent.app) (2014-10-07)

  Request for SmileboxTray (/ Applications/Smilebox.app/Contents/Resources/SmileboxTray.app) (2016-02-12)

  The messages application (/ Applications/Messages.app) (2015-08-19)

  WDMemeoAgent Application (/ Library/Application Support/Memeo/WD anywhere Backup/Agents/WDMemeoAgent.app) (2009-06-24)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app) (2010-09-17)

  Director Docker Application (/ Applications/Hewlett-Packard/HP Photo & imaging software/HP Photo and imaging Director/Director Docker.app) (2006-10-22)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword4 - helper (2016-02-09)

  com [running]. Growl.GrowlHelperApp.89492 (2006-12-30)

  com [running]. Memeo.WDAnywhereAgent.87504 (2009-06-24)

  [operation] com.apple.xpc.launchd.oneshot.0x1000000a.EtreCheck (2016-02-14)

  [operation] com.smilebox.Tray.61376 (2016-02-12)

  [operation] jp.co.canon.cijscannerregister.17640 (2011-05-04)

  Plug-ins Internet: ⓘ

  Flip4Mac WMV Plugin: 2.3.0.14 (2009-09-28) [Support]

  FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  QuickTime Plugin: 7.7.3 (2016-02-09)

  Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

  AdobePDFViewer: Unknown (2010-04-23)

  Default browser: 600 - SDK 10.10 (2015-07-16)

  Web of Google Earth plugin: 6.1 (2011-10-17) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-04) [Support]

  DirectorShockwave: 12.1.7r157 - SDK 10.6 (2015-02-05) [Support]

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

  User Plug-ins internet: ⓘ

  RealPlayer Plugin: unknown

  Safari extensions: ⓘ

  1Password (2016-01-25)

  3rd party preference panes: ⓘ

  Flash Player (2016-01-28) [Support]

  Flip4Mac WMV (2009-09-28) [Support]

  Growl (2006-12-30) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 421,79 GB

  Destinations:

  Time Capsul of Alan W. Voges [network]

  Total size: 2.00 TB

  Total number of backups: 65

  An older backup: 08/29/15, 06:56

  Last backup: 18/02/16, 11:39

  Size of backup drive: adequate

  Backup TB 2.00 size > (disc 421,79 GB X 3)

  Top of page process CPU: ⓘ

  4% WindowServer

  2% fontd

  2% safari

  1% kernel_task

  1% sysmond

  Top of page process of memory: ⓘ

  633 MB kernel_task

  Com.apple.WebKit.WebContent (4) 299 MB

  172MO Mail

  Safari of 147 MB

  Overview of 78 MB

  Virtual memory information: ⓘ

  504 MB of free RAM

  3.50 used GB RAM (1.12 GB being cached)

  174 MB used Swap

  Diagnostic information: ⓘ

  February 16, 2016, 12:31:30 Library/Logs/DiagnosticReports/Mail_2016-02-16-123130_[redacted].cpu_resource. diag [details]

  /Applications/mail.app/Contents/MacOS/mail

  February 16, 2016, 08:15:06 /Library/Logs/DiagnosticReports/Inkjet6_2016-02-16-081506_[redacted].crash

  /Library/printers/HP/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• the fan runs full speed at the beginning upward

  HP Pavilion p6-2037cb bought 19/01/12.  Windows 7.  There is no error message.

  When I turn on the computer after it has stopped all night the fan running at full speed.  This has happened several times in the first month.  The first time, he stopped himself after a few minutes.  Then I learned to stop it by restarting the computer simply.  It still works, but what was once happen one or two times a month, happened twice in two days then you worry I the problem worsens.

  It never happens when I use the computer because I don't do anything that requires a lot of cpu or causes a warm-up.  I just surf the web and send e-mail.  No games or videos or TV.

  If it's a problem of connection fan I would like to know the nearest repair service.  I would rather that ship it.  But I can't find a list of authorized warranty repair service center.  I followed the links on HP Support Assistant but got sent to a site that does not list the pavilions.

  I need to know why the fan runs full speed at first upward and where to repair close to where I live.

  Hello mpw101,

  It seems that there is some confusion about the products of your receipt and how he explained. I have passed your thread to appropriate to review team. Someone must be in contact with you shortly so that you can discuss your experience of HP customer care.

• Satellite Pro S500 - 11 c is suspended and the fan runs at full

  Hi people,

  I am experiancing a problem with my Satellite Pro S500 - 11 c where close unexpectedly, it crashes and the fan runs at full speed. Discount to zero is my only option and this resulted in the windows having to retrieve a few times so I'm fearing one requiring a major reconstruction after a deadlock of the future. Until now this issue has occurred only when you use a wireless USB mobile of 3G or internet teathering via USB with my iphone 3G. Using another USB port did not help.

  If someone has encountered this problem and have a fix? No help from Toshiba?

  Best regards

  Andrew

  Hmmmm... What to say. Problem is that you use third party hardware and software and some conflicts are possible. The question is: who can help you with this?
  In general you should talk to your ISP provider at first to see what they will say about all this.

  Have you ever talked with them?

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• The fan runs continuously. Firefox unresponsive, slow.

  The fan runs continuously. Firefox unresponsive, slow. While all slow running. Reboot and it's ok for a few seconds and then back to fan works etc...

  Reset the SMC reset management system (SCM) controller on your Mac - Apple Support

• The fan runs very often one a Tecra A6

  Hello
  I have a Tecra A6, about a month. I updated the BIOS yesterday to 2.60 and after that the fan works with intervals of 15 seconds. I don't know if it s the update of the BIOS that causes, but it was not there before... Anyone with the same problem? Can I go back to the old BIOS? If 'yes', how should I do?

  / Axel

  Hello

  May I ask why you updated the BIOS?
  Have you had problems or what?

  I think it s not necessary to update the BIOS if the laptop works properly.
  But of course, it of possible to downgrade the BIOS if you find the previous version of the Bios. But as far as I know on the Toshiba page you will find only the latest version of the BIOS. :(

  But have you tried changing the settings in the Toshiba power saver?
  What about the BIOS settings? Are there options CPU or fan?

• Pavilion 500-242ea: x 5 component the Fans Running constantly - seems more noisy for me - is that true?

  Hello

  Have had a unit of 500-242ea Office Pavilion, a little more than 12 months now, but I remember it is much quieter when I bought it

  Currently, all 5 fans operate constantly, which seems to be at full speed.  Is this good?  I'm not crazy, I know fans need to run components cool but I didn't know that all 5 had to operate at this speed!

  Notes: I'm not a gamer and do not exploit several programs at the same time, all that often, so do not insist on CPU etc.  The unit is clean / dust-free, inside and outside, and there is no problem of heat sink, I noticed

  Graphics card was recently replaced (due to grinding noise on start up) under warranty but replacement is not stronger than the previous unit

  Can anyone suggest, if it is possible to adjust, reset or control the fans via BIOS or if there is another way to reduce this noise nuisance?

  Thanks for the advice offered

  Hello

  Being a "student of honour here, I don't know how to tag my question as"Resolved."

  In any case, for someone who is having a noisy fan problem, you can give what I've done, a go

  1 / restart PC Desktop, tapping f10 key as it works to begin with, it penetrates into the BIOS menu

  2 / take a look at all the options related to food.  I took a look at the "Thermal" CPU, but please note that I have not made no changes to anything!  I have not noticed, any menu for changing fan speeds

  3 / choose option "exit without saving the changes.

  If you're lucky, as I now have a silent computer near

  Aaaah... happiness

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

• The fan runs super fast. HP Compaq dc5100 SFF

  These days HP Compaq dc5100 SFF - or fans have aired the apparently fast fan speed.

  Was full of dust (to the point of blocking the absorption on the front fan)

  Used an AIR CAN blow the dust out with the lid open.  We also had a blip of brief power in the last days - caused a stop down.  And we have updated some business software.  Has been restarted.

  We have 3 more of the same model which are OK

  Thanks for any help

  The SFF dc5100 is notorious for bad capacitors on the motherboard.  I had one where the fan ran at top speed all the time.  There was a swollen capacitor located at the end of the PCI 1 connector.  It seems C469.  It's a 6.3 volt 1000uF cap.  I replaced the capacitor and that fixes the problem.  To keep the computer cool lengthens the service life of capacitors.  It is wise of the dust periodically in order to cooling air flows.  How always, once a capacitor going bad, the only solution is to replace it.  A burned capacitor will be inflated. The flat top normally will be curved upwards and, possibly, a leak of a crispy Brown material.

• HP 8510W boot not until the cool, the fan runs at high speed

  I did a little research but didn't really much other than dust cleaning. I did this, even removed the fan and the heat sink.

  Operating system: 32-bit Win7

  Early days of cold, boots upwards, normally, the fan turns at slow speed. CPUID Hardware Monitor shows all the time in the range 30 c - 60 c. From a web browser will cause the fan to spped, finally at full throttle, CPUID HW Monitor says:

  TZ2_ up to 90 C

  TZ5_ up to 100 C

  Remote1 up to 90 C

  Other times remain in the range of 30 c - 60 c

  The task manager's performance tab shows 1%-3% CPU, 30-40% consumption of Mem.

  Close all does not help, time remain high and the fan continues to run at high speed. Reset does not succeed, it will cut down, try to restart and stop again. Finally, it will sometimes get a screen where Windows thinks it could not start and wants to fix/reinstall the files, or go back to a restore point. If to cool for 10 to 15 minutes, it will start normally with the low fan speed until something starts to run (CPUID HW Monitor and Task Manager do not cause the fan speed).

  So nobody knows what TZ2_, the TZ5_ and the Remote1 map 30 5 8510W mother? Is this a real plus temp likely situation, ot possibly a problem with bios/driver not reading sensor properly?

  Well well, so far, no response, but I seem to have solved the problem. I tried reverting heatsink composed of all chips connected to the conduct of heat with no improvement. By checking things right after a stop, I noticed that the graphics chip was too hot to the touch even with the new complex. This meant that it was not the heat pipe.

  Ordered a used one from eBay, put it in and now it's stay nice and cool, not more than 60 C.

  The part number for the heat pipe is 452227-001.