Request by PowerEdge 1800 technical

Similar Questions

• alimentatore per SERVER DELL PowerEdge 1800

  Salvo, avrei need disponibilita di prezzo e by:

  -riflettore 01

  SERVER Dell

  PowerEdge 1800 - Codice di matricola: C1HHC1J

  Dati in hoist.

  Speaking saluti

  Buongiorno,

  Unfortunately the party by I server 1800 PE non sono più available by the sale.

  Grazie

  E.C.

• PowerEdge 1800 Server

  I have a Dell PowerEdge 1800, which has worked very well for 10 years, and I intend to replace it in the fall.  Last night, something happened and the motherboard got a little warm, and the system is dead. I found a replacing MB and was looking for a new power lift the thing and get some flexibility to order a new one and get it all moved on and running.  Dell has no idea about food, and I'm tired of doing tossed.
  Is anyone know by chance the part # for this power supply?
  I am trying to order it so it will be there tomorrow or the next day and I don't think even afer of power supply I found a MB. I started thinking about it after that I came home.

  Help!

  GD323 and U2406 numbers... There may be other parts numbers, all interchangeable and compatible inter.

  https://www.Amazon.com/Dell-0GD323-PowerEdge-non-redundant-supply/DP/B00686KCOO/

  http://www.memory4less.com/m4l_itemdetail.aspx?Itemid=1440027556&PartNo=0U2406

• Identification card mother PowerEdge 1800

  I have a very marked as a single server PowerEdge 1800 CPU motherboard motherboard. It has a P/N by the CPU of DA0S10MB6E1 REV E and bar code CN-0xm091-71703-71 b-0552 Rev A00. Is there another way for me to identify what I exactly?

  
  

• Step to convert the current Dell PowerEdge 1800 server in Esxi 4

  We have production server, which is Dell PowerEdge 1800 with Windows SBS 2003 with 3 hard drives in RAID. And then, we want to make this server as VMware Esxi 4 with the same Windows 2003 SBS server. We will replace the 3 new hard disks, but new readers are not the same as the old disks. What is the right next step? Because it comes to the production server, we cannot lose all data.

  1. use VMWare vCenter Converter to convert the current Windows 2003 SBS to VMWare workstation

  2. Replace with 3 new hard drives and install VMWare EsXi 4 CD

  3 use VMWare vCenter Converter to load WMWare workstation image into the new server Esxi 4.

  Please let me know if this is the correct order? Is there a risk? Thank you!

  Welcome to the community - that sounds about the right order =

• PowerEdge 1800

  Hi I do when installing esxi 4.0 on Dell Poweredge 1800 Server?

  Thank you

  Having any kind of problem?  This thread discusses the use of the 1800 - http://communities.vmware.com/message/1269637#1269637.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Guarantee extension request by PowerEdge T610

  Buongiorno,

  con the sound system presents a take UN preventivo by the di UN PowerEdge T610 della co extension.

  Codice client IT2721546

  Price made it 16/05/12

  Buongionro, sto contattando by mail.

• DELL PowerEdge 1800 Raid SCSI

  Hello!

  At the moment im dealing with a DELL PowerEgge 1800. It is used for BS that development issues - not a productive machine. Performance problems caused by SCSI for Dell Perc 4 controllers are well known, according to me. This is exactly my problem.  :|

  Attached to the Perc 4 there are 4 pcs. 146 GB pluggable hard drives to hot home. I want to change the Perc to something with more performance - but without changing something to minimize costs.

  I'm not able to find something suitable in the HCL for ESX4 (which is not to say it is not written there...). I need a single channel U320 raid controller with PCI - X or PCI-E interface. I Don t mind if it is not listed in the HCL (server is for test and dev only)-he comes to work.  And need a fairly cheap controller card.

  At first I thougt on an Adaptec 29320-R. But I read that this type of controller only is not supported by ESX 4 more because of the 64-bit compatibility.

  So I see two ways:

  1: find a suitable map (see above). Someone at - it ideas?

  2: return o ESX 3.5 because they could be more controllers can be used in this scenario. The 29320-R can be used here?

  THX in advance for your ideas...

  Martin

  In the compatibility section of material from the VMware site... ([http://www.vmware.com/resources/compatibility/search.php?action=search&deviceCategory=io&productId=1&advancedORbasic=advanced&maxDisplayRows=50&key=&release] = 13 & datePosted =-1 & partnerId = 4] & [] ioTypeId = 1 & manufacturer [] = - 1 & vid = & did = & svid = & ssid = & rorre = 0)

  Site of Adaptec 29320ALP card supports support RAID 0, 1, and 10 only.

  The card 39320 is also listed in the HCL

  With several controllers Adaptec SCSI RAID more listed, you have to choose between. I am assured to seek those who would compatible with ESX/ESXi4 u1, but as far I can see, at least compatibility version 3.5.

  At this point, you will need to search with the features really, you need and a price you can get purchased cards.

  VCP4

• Request alimentatore PowerEdge R310 [CF]

  Buongiorno mi servono 2 alimentatori modello D350E-S0 reference: DPS - 350AB - 11A.

  By contacts 059/539762

  Grazie

  Alberto

  buongionro, sto contattando by mail

• Dell Poweredge 1800 Raid 5 accidental removal of the HARD drive

  I was trying to see the type of Raid HARD drive I wanted to upgrade the server. Out-of-disk HARD 3, 2 were disconnected. I turned off the server and then reconnected the HARD drive. The Raid is currently offline. It displays 00, 01 are missing and 03 as connected.

  How can I get the raid, data are crucial and I know if I have INIT all data will be lost.

  Then you will need to enter CTRL-R, highlight the PERC controller in the upper left corner of the VD MGMT screen, foreign and import.  Then see if your boots OS and your data is accessible.

• PE 1800 2003 SBS SP2 and 2008 Standard, separate partitions.

  Hi guys,.

  Try to put in place a PE1800 with double primary partitions one with 2003 SBS SP2 (OEM) and a second partition with 2008 Server Standard retail).

  A few tips on how to help to manage open as to install all drivers from the start?

  Second question, either OS would be a same extended partition?

  Thanks in advance,

  A.S.

  Hello AS

  IPVCE

  Try to put in place a PE1800 with double primary partitions one with 2003 SBS SP2 (OEM) and a second partition with 2008 Server Standard retail).

  A few tips on how to help to manage open as to install all drivers from the start?

  Download the System Build and Update Utility, burn it to a DVD and then start to it. Follow the prompts on the screen to install the operating system. It will be to preload drivers necessary for installation. If the copy of the 2008 Retail is not recognized as an operating system valid for the SBUU then you should be able to install directly from the DVD to the BONE.

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-1800?driverId=NF1CT&osCode=WNET&FILEID=2731102793&LanguageCode=en&CategoryID=SM

  IPVCE

  Second question, either OS would be a same extended partition?

  You should be able to see all the partitions in any operating system. They will be marked differently in each operating system, but they will be present and you should be able to read/write for them across Windows operating systems.

  Thank you

• Upgrade processor PowerEdge T410

  I have a PowerEdge T410 with a processor Xeon e5502 two hearts.  I would like to upgrade the processor e5506 with its four hearts.  I have one available and wonder if the motherboard will handle swapping out.  I would also add a second if it will work.  Thank you.

  Yes, an e5506 works perfectly:
  http://i.Dell.com/sites/content/business/solutions/engineering-docs/en/documents/PowerEdge-T410-technical-Guidebook.PDF

• PE 1800 PERC LD 0 PERCRAID SCSI Disk Drive

  Dear all,

  I have a Dell PowerEdge 1800 with above mentioned PERC configuration server.

  I have 5 X 73 GB 10 K HDDs installed, the total usable space is 340 GB [21 (drive C :) and 319 GB (drive D :)].

  I have a free HARD drive slot and intend to add a HARD drive, what is the procedure.

  I wanted to say, I have the same 73 GB 10 k HDD to add, but I don't know how to add it.

  Please advice.

  Well, you need to know a few details to make this work.  What controller RAID do you have?

  When you have installed OMSA, you probably had to update firmware, which disabled the storage of the installation part.  Rerun the installation, choose custom and ensure that storage management is installed.  If it still does not display, you must first update your system firmware (BIOS, GER/BMC, RAID (first pilot)).

• I see many people posting this info... anyone is able to decipher?

  Start time: 21:18 28/07/16

  Model identifier: MacBook9, 1

  The system version: OS X 10.11.6 (15G 31)

  Kernel version: Darwin 15.6.0

  Integrity of system protection: enabled

  Since the start-up time: 2 minutes

  Journal

  28 juil 20:39: 50 can't load kext com.apple.driver.AppleUpstreamUserClient (error 0xdc008012).

  28 juil 20:39: 50 Kext failed loading com.apple.driver.AppleOSXWatchdog (0xdc008012).

  28 juil 20:39: 50 can't load kext com.apple.driver.AppleOSXWatchdog (error 0xdc008012).

  28 juil 20:39: 51 * [BroadcomBluetoothHostController] [SetupController] - disableHIDEmulation () failed - result = 0xE00002BC (kIOReturnError) - retry time 0 - 0xd300 *.

  28 juil 20:39: 51 Kext failed loading com.apple.driver.ApplePlatformEnabler (0xdc008012).

  28 juil 20:39: 51 can't load kext com.apple.driver.ApplePlatformEnabler (error 0xdc008012).

  28 Jul 21:15:39 launchd process [1]-l' system of limitation of disabling i/o level

  28 Jul 21:15:39 launchd process [1] disable the CPU - the system-wide limit

  28 Jul 21:15:55 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  28 Jul 21:15:55 AppleIntelLpssI2C - 1:initACPIProvider: failed to get the path to acpi for provider

  28 Jul 21:15:55 AppleIntelLpssI2C - 1:start: initACPIProvider failed

  28 Jul 21:15:55 error: EFI AppleHSSPIController::start left active SPI

  28 Jul 21:15:55 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xf3caa6e67a11df47, the provider is 0xf3caa6e5babab747

  28 Jul 21:15:55 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  28 Jul 21:15:57 disk0s1: alignment error.

  28 Jul 21:15:57 disk0s1: alignment error.

  28 Jul 21:15:57 disk1: alignment error.

  28 Jul 21:15:57 disk1: alignment error.

  28 Jul 21:15:57 disk0s3: alignment error.

  28 Jul 21:15:57 disk0s3: alignment error.

  28 Jul 21:15:57 AppleIntelLpssI2C - 1:initACPIProvider: failed to get the path to acpi for provider

  28 Jul 21:15:57 AppleIntelLpssI2C - 1:start: initACPIProvider failed

  28 Jul 21:15:57 [IGPU] will fallback alongside host planning if graphics firmware does not load

  28 Jul 21:15:58 * [BroadcomBluetoothHostController] [SetupController] - disableHIDEmulation () failed - result = 0xE00002BC (kIOReturnError) - retry time 0-0 x 6500 *.

  28 Jul 21:16 his assertion in AppleHDAController at line 8718

  Content of/etc/hosts

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Firewall: on

  TCP/IP

  Subnet mask: 255.255.255.240

  Small files: 3

  Time elapsed (s): 220

  Please do not empty your log file without be requested, let us rather technical problem you are facing.

• Server 2003 - out of disk space on the partition of 12 GB

  I have a Dell PowerEdge 1800 server with Server 2003 R2 SP2 standard. 'Windows' resumes Go 9.51 to a 12 GB partition that has been installed and installed with the o/s by Dell. Now I have less than 2% left open (267 MB) and I don't know how to get more space. I did a disk cleanup and return the marginal space.

  Cliff

  Server issues are best addressed on the Technet site.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I can tell you that 12 concerts is not enough and same server 2003 will grow over time.