restarts and blue screen m30 852

Similar Questions

• When connecting through vpn system get restarted and blue screen in win xp3. How to solve this problem?

  I have everyone!

  I want to connect my people by VPN, once install the vpn and attempt to login system download blue screen and restarted in win xp3. How to solve this problem?

  Hi Satya,

  The question you have posted is related to the VPN connection and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

  Hello.

  I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

  Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

  Plaese help me.

  Hello

  It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

• Satellite A500 - crackling sounds and blue screen

  Hey everybody.

  I bought a laptop Toshiba Satellite A500-19w about 4 days ago (today it is Sunday, March 7, 2010).

  I had the sounds of crackling of my speakers which have been mentioned so many times in the forums, no real solution.
  I also experienced the crash of the blue screen, that's already happened 7 times while I was not strongly using my newly buy laptop.
  I'm not looking for a repair or a replacement, because I find it quite unacceptable to have to think about the errors, faults & fixes as much as the laptop is brand new.

  What I want is a refund, but I'm not sure on how to do it.

  I know that Toshiba has some sort of refund policy, but if someone can tell me exactly how it works, because I want to get rid of my laptop as soon as possible (I will not buy any more portable Toshiba, especially since I had some similar problems with my Qosmio f30).
  If someone can give me some guidance, because I don't want to be mocked or used and cheated out of refund.
  I bought my Toshiba in the Middle East (perhaps refund policies are different here).
  Thank you.

  Post edited by: mihran

  Hi mihran.

  If you want to pay off your laptop, you should talk with your computer store where you bought it. Only the can repay your laptop and not Toshiba directly.
  Of course it is also depending on the country where you life, but normally you can pay within 14 days I think. So in your case I speak with the seller or give them a call. They explain how to do this.

  But let me give you a little advice: regarding your problems with the crackling sound and blue screen I recommend that you contact an authorized service provider or ask a new A500 (this should be possible if you have only 4 days). Generally, I can say that a friend of mine has Satellite A500 and he is quite satisfied with her. This laptop has a great design equipped with new material for a good price. :)

• Re: Can't do and blue screen with the recovery tool

  Hello

  After I start my computer, leaving the office, but I can't do anything, everything freezes!

  I tried the recovery (with F8) tool and it starts, but after a while the bluescreen apears.

  Can someone tell me what is the problem?

  Thank you

  Hey,.

  What laptop, you have exactly and blue screen appears exactly?

  If disk HARD recovery doesn't work you should try the Toshiba Recovery disk recovery facility.

• Cannot install windows - MEMORY_MANAGEMENT exception and blue screen

  Hello

  IM unable to install windows on my laptop computer, because whenever I try to install it, after installation there is exception MEMORY_MANAGEMENT and blue screen. It all started since a few exceptions on my previous windows which gives began several exceptions like DRIVER_IRQL_NOT_LESS_OR_EQUAL as errors and PC rebooted each time. Then I thought to install new windows and the problem started. I'll be very grateful if you look forward to my problem

  Thanks :)

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  (1) If you do not know your readers make / model number AND your computer is no longer able to load Windows:
  (a) Renmove the drive of your desktop and check the label for the serial number and model.
  (b) remove the bottom cover of your laptop, remove the disc and check the label for the serial number and model.

  (2) If Windows is still usable, install 'Speccy', it provides information of the computer/system in detail on your:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test drive - create a Bootable CD:
  (or connect the drive to anther PC and install the appropriate test software)

  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.

  List the factory utilities, walk.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital disks, download the file .iso from WdDiag:
  http://support.wdc.com/product/download.asp?GroupId=613&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also try Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD - modified software: 24/10/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  PNY support: http://www.pny.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html
  Samsung Magican review:
  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  J W Stuart: http://www.pagestart.com

• HP elite e9160f had compatible windows error/process stop notice and blue screen freezes.

  HP e9160f Vista Home Premium running is compatible notice of error switch Windows and blue screen freezes.  Any suggestions?

  I went ahead and ran the HP disks to reset to the factory settings and loaded Windows 7.  No problems now!  Thank you for your help and persistence.

• conmputer crashes and blue screen appears and the computer restarts

  my computer guard crash blue screen appears and then the computer restarts, reinstalled windows xp and the problem persists

  If you reinstalled Windows, then you can be sure that it is hardware related.

  The three most likely culprits are the processor, graphics or RAM card. Unfortunately exactly identify the problem will always be tricky unless you have access to the spare parts that you can switch to turn.
  Neil
  www.nwarwick.co.UK

• Satellite C660 and blue screen

  Hey,.

  So after trying to install the bios update v 1.30 in the toshiba bulletin board blue screen appears for only a second, and then the computer restarts after you restart it asks "Unexpected Windows shut down, searching for solutions" additional info:

  Issue name: blue screen
  Version of the OS - 6.1.7600.2.0.0.768.3
  ID of locale - 3081

  BCCode - e4
  BCP1 - 00000001
  BCP2 - 8AB1FCA8
  BCP3 - 00000000
  BCP4 - 00000000

  OS version - 6_1_7600
  Service Pack - _0_0
  Product - 768_1

  Files
  C:\windows\minidump\060111-31590-01.dmp
  C:\users\teejays\appdata\local\temp\wer-68936-0.SysData.XML

  ADWARE TRACKING COOKIE.

  any advice with this problem would be appreciated muchly.
  Thank you, Oliver.

  Stand by.
  You can start your laptop properly?
  You can use the preinstalled operating system?

  Blue screen appears when you try to update the BIOS only?

• Windows XP keeps restarting after blue screen

  I tried to reboot in safe mode, normal and the latest, but nothing works.  The blue screen appears for a second then restart my desktop computer.  The technical message I get is "stop: 0000007E (0X8A713510, 0XBA50B7EC, 0XBA50B4E8).  I checked the previous similar responses to this problem, but I've not seen one adapted to these numbers.  Can anyone help?

  My fault, it's stop: 0000007E (0xc0000005, 0X8A713510, 0XBA50B7EC, 0XBA50B4E8)

  First, it is important that you find a way to copy all your data before doing anything else.

  Unfortunately, a number of things can cause what you are experiencing! If you are not that technically savvy, you may need to find a PC tech.

  Hardware problems can certainly cause BSOD. Here again, your happened recently, if you can perform what is commonly called a manual system restore:

  http://support.Microsoft.com/kb/307545

  You might luck with that.

  If it doesn't work, you can try a repair installation:

  http://michaelstevenstech.com/XPrepairinstall.htm

  And then, if you have a hardware problem, no amount of repairs or relocation you won't help. You will need to troubleshoot hardware, which may be too advanced for you.

• Flickering of screen and blue screen

  I have Hp Pavilion dv 2000 series... notebook Windows vista

  I get the blue screen since these days. Before her (blue screen) just my screen starts flashing vogourously... and when I restart it takes a lot of time.
  When I disable the driver NVIDIA (8400M GS) it worked fine for a few hours... Help PLZ

  Looks like a possible defective hardware * or * bad driver.

  Try to update the driver from the web page of manufacturers (nvidia.com.)

• Receiving intermittent crashes and blue screens

  Original title: blue screen of death

  I built my computer and have intermittent crashes/blue receintly screens.

  When I boot back I get this error message:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 1a

  BCP1: 0000000000041201

  BCP2: FFFFF68000007000

  BCP3: 95A000300E17F847

  BCP4: FFFFFA80043101A0

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  He tells me to check the for more info .dmp file, but I can't open the file.

  Hello

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Processor	Name of the computer	Number of processors	Major version	Minor version
  090310 19983 - 01.dmp	03/09/2010-12:35:40 AM	PAGE_FAULT_IN_NONPAGED_AREA	0 x 00000050	fffffa81'80e63b3b	00000000 00000000'	fffff800'02ce75ff	00000000'00000005	Ntoskrnl.exe	Ntoskrnl.exe + 70740	NT kernel & system	Microsoft® Windows® operating system	Microsoft Corporation	x 64		4	15	7600

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter above for pilots and memory.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to escape on IP4 PXE boot and blue screen password for Dummies

  every time I have start or restart I have to enter the password in the blue screen and it starts from PXE, how I can escape these two things, everyone wants to charge me $150 I am a senior on a fixed income and put a little technological challenge

  bonnell_kevin,

  Start the computer and start receiving the F2 key to enter the system setup/bios screens.

  Once in the bios, you can arrow over the BOOT screen there is a first, second and third boot device. Scroll down and use the arrow keys or the keys to make more or less the main hard drive the first boot device. If you read at the bottom of this screen, you will see what keys are used to make the hard the first boot device. Once you have the value HD 1st boot device, press the F10 screen to save the changes and exit.

• Frezzing and blue screen

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA800CF43BC0
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\102715-7316-01.dmp
  C:\Users\ISTIUK\AppData\Local\Temp\WER-12027-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  these things stood when blue screen appeard... What is the problem...

  WHAT IS THE SOLUTION?

  MY pc hangs 4/5 times a week... sometimes even, it happened that my pc has started and immediately blue screen appeared during startup and pc has restarted.

  MY CONFIG:

  Core I7 2600 K

  Gigabyte Z77 HD3

  MOS TWIN 20 GB (8 GB X 2) + (4 GB X 1) RAM

  Ggabyte GTX 970

  WINDOWS 7 ULTIMATE 64 BIT

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Computer immediately freezes and blue screens. BIOS error could not be read.

  Hi bought a computer from a friend worked perfectly for them now, I plugged my old PC cables and it worked fine for like a week, then when I turned it on it just completely frozen, he told me that the specifications of the processor then instantly frozen before even that came to the sign in screen, caps lock shift etc. on the pc do not work and then it worked fine for a week and then this morning I went and I registered and it blue planned to tell me something about bios couldent read it you stop fast and now I am to plant him as soon as I turn it on, the only new material I installed was a new adapter wireless a few days ago , but the problem started before that, any help you can give would be great, thanks.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.