restore CD not finish

Similar Questions

• Why the system restore did not finish successfully

  System Restore will not work. Always get the message saying unspecified error meant the restore has failed. Tried Safe Mode, but still did not.

  System Restore will not work. Always get the message saying unspecified error meant the restore has failed. Tried Safe Mode, but still did not.

  Make a check of the system files. It is to look at the fields corrupted, and he will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• System Restore does not work correctly

  for some reason any my system restore did not finish successfully, it worked perfectly at the front.

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• iTunes 10.5 download not finish

  I can't download itunes 10.5 - system: "the problem with this Windows Installer Package.  A program run as part of Setup did not finish as expected".  The only thing I can find is maybe I have XP 64-bit edition, which does not support the download.  How will I know if I have 64-bit edition?

  Windows XP-64 is quite rare that you almost certainly would know if you had it or not.  But for the record, right click on desktop and select Properties.

  This should help:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility:
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Vista Home Premium System Restore does not work

  I didn't my laptop another year.  But whenever Vista does not turn right... too slow or what not I try and create a restore date to solve these problems, but whenever I do it always returns he tells me, "that system restore could not completely finished, so your files have not changed."   I'm so tired of NOT being able to fix my computer and it works fine!  Can someone please help?

  "But every time that Vista does not turn right. too slow or what not I try and create a restore date to repair these... »

  You can't do a restore point for the last week, today.

  You can do a Restore Point for today, so that next week, if necessary, you can restore to today.

  Think about it: How can you make a Point of restoration today something happened in the past.

  You should have in the past, if space allowed in SR, to come back to today.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 install not finished

  Hello

  Today I received my HP Envy 700 desktop computer. After some problems, installing Windows 8 has not finished.

  Now, when I start my computer the screen repeat myself that windows installation has not completed properly and I have to restart the computer. This gives the same result. I'm not a systemrecorvery with F11 or F10.

  WndOws 8 is installed on an SSD card.

  What I have to do recovery CD and use them on the HP Envy? How?

  Thanks for any help. I hope that I can use my new computer soon.

  View Wim Sijses

  Hello

  I had the problem of Sys Prep with a set of HP recovery disks created on my HP computer.

  I had to order a resumption of the HP factory. Set HP recovery completed successfully.

  It seems that the recovery image on the SSD drive is messed up. You disconnect all external devices except the factory condition keyboard and mouse when you are recovering?

  Here is the support site for your PC. I don't see a recovery disk value available to the command for any installed operating system listed...

  I think you'll have to contact HP Support, explain your problem, and they may have to provide HP recovery disc to restore your PC to factory State. You can also return the PC to get a refund or Exchange the computer following the procedures required by the retailer.

  Jaco

• System Restore does not work on my Windows 7 computer

  System Restore does not work for me on Windows 7 pro, he returns with a cancellation but does not either.  I have load a movie in movie maker and all the trouble started.  I couldn't finish the loading of the movie at that point, I started to have problems with the operation of windows.  End result, I tried restoring the system without success...

  Hello

  1 are you getting any error code or error message?

  2. have you successfullyperform before system restore?

  3. have you made any change before this problem?

  I would suggest trying the following steps and check if it helps.

  Step 1: search for errors in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 2: check if you are able to save the clean boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Step 3: security software temporarily disable and check if it helps.

  Disable the anti-virus software in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: After reviewing the matter, must reactivate the security on your computer program

  Also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Sebastian M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to restore the Notes

  I recently started to use my writing notes and jotting down ideas, but last night I was not sure if my notes would be shared with my Mac friends since I have not got one for me and his had used for synchronization and sharing of music. I decided to disable iCloud notes with a warning noting that "all the iCloud notes would be deleted, you'd like ongoing?", I read it with a change of mindset, thought I pressed 'Cancel', but instead he deleted notes. I am very sure that I didn't quite save my iphone. Is it possible to restore the notes at all?

  iCloud only synchronizes the data (Notes) using your Apple ID only.

  If you deselect the Notes option in System Preferences > note, used to synchronize your Notes on YOUR devices.

• How to restore lost notes?

  I deleted a large number of unnecessary e-mails, after doing so, I lost most of my notes. How can I restore my notes?

  You may be able to check for mail removed within the email application or your email provider.

• Report Crystal restores do not properly on Mozilla?

  Hello

  We use VS2008, CR2008 on server 2012. Chrome & IE CR works correctly.

  But when I use Mozilla with the updated version does restore does not correctly.

  Hello

  ClientTarget = "top-level".

  Thanks for the info. It does not work properly. Thank you very much...

• Download of fash Player plugin 11.7.700.202 did not finish.

  When I updated to Firefox 21.0, I found that Flash Player plugin 11.7.700.202 did not work. Videos would not play. Had no problems before the update to Firefox. I downloaded a new copy of the player, but the download would not end. An error message (only one instance of this application can run) appeared. I used Adobe Flash Player uninstaller to remove all Flash files. Then I tried to download 11.7.700.202 Flash again. Same error message appeared and have not finished downloading. Chrome videos work fine. Is there a hidden somewhere Flash file that conflicts? Is this a bug of Mozilla? I looked all support topics and found nothing. Any help would be greatly appreciated.

  Download the flash of

  • http://get2.Adobe.com/flashplayer/

  When you install your flash close your firefox

  • Firefox > file > exit

• When I try to send an attachment with a PDFor JPEG, the indicator "sending" appears and never indicates that the document was "sent". He did not finish the task.

  When I try to send an attachment with a PDF or JPEG, the indicator "sent" is displayed and never indicates that the document was "sent". He did not finish the task.

  You have security software that may block the download?

• System Restore does not-how do to adjust settings

  System Restore does not work on my laptop.
  It did not work because the new toshiba set by phone for me when I bought it.
  But now I formatted it and its not working yet.

  Any help on how to adjust the settings.

  Hello

  It's very easy
  First you should check if the system restore is not disabled on your laptop.
  This can be checked in the control-> system-> System Restore tab panel.

  You have to uncheck the option called turning off the coast of the the system restore on all drives.
  Please check if there is enough free space on the two drives for the files in system restore.
  In the settings you must set the disk space to use to the maximum!

  After restarting again you should start the System Restore tool and should create a system restore point.

  Good luck