Rig crashes even after reformatting, heavy registry problems.

Similar Questions

• W530 Se crashes even after reformatting

  Hello!
  I have a W530 (i7-3720QM to 2.6, 32 GB of Ram) and after it is about 3 or 4 hours, it starts to slow down, and maybe 15 minutes, it just hangs. I think it might have something to do with the video card, but know not (maybe some corallation to watch the video). I noticed the slow down when videos start to stutter, but prior to that, it is super fast. I can open Photoshop, Indesign and Illustrator simultaneously in about 15 seconds. Here is what I tried:

  • Uninstalled creative Suite 2015 (thinking that might be the problem)
  • Uninstalled Chrome, Air
  • A running Virus and Malware scans (Nothing)
  • Check the error log (Nothing)
  • A ran Diagnostics on all (all past. The main drive is a relatively new Samsung 850 SSD, secondary is an SSD of 840 Samsung a little older but still good. Last memory, cpu spent, etc.)
  • Connected and nothing, just leave (still hanging)
  • Formatted and reinstalled a fresh copy of Windows and drivers Lenovo
  • Separate active graphics cards (the onboard intel could have been the cause of thought)

  The only thing out of the ordinary happened at the same time, started the fingerprint reader has stopped working. In the bios, he just said that no fingerprint reader has been found, so I just think, she died and is not related. Machine is under warranty for 5 months, so technically I could send in for service, but of course I'd like to avoid that if possible.

  Thanks for your help!

  
  

• The basic clock keeps crashing even after deleting files in C:\Users\AppData\Roaming\Adobe\CoreSync

  Hello!

  I have the problem with the synchronization of the base, a window telling me that "Core Sync has stoped working" keeps poping up. I tried a few solutions, but the only one I found was that I should delete some files in C:\Users\Peter\AppData\Roaming\Adobe\CoreSync.

  Even after doing that I have the same problem. What should I do?

  Best regards

  Peter

  Hello

  This link might help:CC Core Sync crashing several times

  Kind regards

  Sheena

• Firefox crashes even after a clean install of Windows

  Hey!

  My Firefox keeps crashing. It starts up ok, but still crashes shortly after. I do not see a pattern in accidents, it seems random. Strange thing is that I had this problem before with Win7 and now he persists after installation clean full of Win10. The two hard drives formatted, no old files or anything left... It crashes in safe mode, too. On Win7, I could get locked out of the browser. Sometimes he would start crashing whenever I started the browser. A reboot has allowed me to once again successfully launch Firefox, but it would soon break without worrying. He crashed on the clean install of Firefox and crashed after that I installed Adobe Flash.

  The crash began perhaps a few days previously, I think not that a lot of it initially. Now, however, it drives me nuts; It is basically impossible to navigate. Firefox browser my go-to for years and I would rather go to another.

  Here are a few crash reports: 4b05df7c-24d3-49e3-a13f-c9d57aca3cf0 bp-775561fc-4d6c-48a5-8c6b-e3af42161108 43d377a7-ea92-4c37-b717-84a562cd2d36 bp-09b21c04-8640-44ed-a261-a98f12161108 bp-9726e46d-d041-4fba-b905-f92682161108 fb6d8a28-79c6-4cab-b4c1-096778ca49e8

  You will appreciate all help to the problem.

  Seems that the problem is solved by itself. Not a single accident today. I don't have any idea of that which could have fixed, or what caused it in the first place. Curious, but no matter, I'm a happy camper now. I wish all support forums it was effective.

• Firefox crashes even after reinstallation

  I have encountered this problem after installing a vpn program called hotspot shield. I was using firefox 7.0.1 I also tried previous versions, but even if I uninstall firefox and remove all my user data, firefox plant again once I used mozbackup (mozbackup don't has not been updated for the month)

  You know that looking toward the top of the crashreport:
  
  https://crash-stats.Mozilla.com/report/index/BP-a2061e06-079b-4078-9815-54fc12111104
  
  It shows RapportTanzan36.DLL in stackframes #7,8 and 9. This dll is part of the report of Trusteer.

• Cannot install SP3 as it crashes even after recovering the computer by using a recovery disk

  I recently had an accident requiring that I reboot using my restore disk that were made when I first came to this computer. Since the restart, I can't access the updates from Microsoft Updates program. No error message, tells me that I can not connect. After several attempts, I think that the problem lies in the validation of the Windows program I use. I tried manually to run the validation program and to download security patches I've saved previous accidents. I show that SP2 is underway. I have a standalone download SP3, that when I upload in the system, crashes and burns. Back to the same thing, restart using the recovery disk. I realize for XP ends next month and its time to upgrade. But I would like to have this machine in working condition to use for other tasks.

  Original title: update XP

  You are a candidate for this patch before installing SP3...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  .. you are if your PC is a HP Pavilion and Presario, Media Center and has an AMD processor.

  To find out if you have an AMD processor...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Your processor type is shown in the computer: section (see below)

  You can do a restore of the system in safe mode to get rid of the SP3...

  http://support.Microsoft.com/kb/306084/en-GB

  .. .or do another cover.

  Tricky

• 24 of Firefox crashes even after reset it and no hardware acceleration

  The latest version of Firefox crashes often for our internal application. I have reset to factory settings and disabled Firefox hardware acceleration. I find that it crashes.

  Some crash reports:
  
  1. bp-feda8b38-ca1a-481a-b304-e614d2130929-celui-ci is without hardware acceleration and once Firefox
  
  2 bp-65384ee3-9ace-441a-a325-977472130928
  
  3 bp-ebb16c9b-d419-466e-b0b8-3d4462130927
  
  
  
  4 bp-f0252801-3f27-4517-852a-8ceee2130927
  
  5 bp-7227f930-af84-4c0c-8e60-057ef2130927

  When displaying reports, in particular the first, that it is said that the report was not found. This makes it harder to find the cause of the problem.

  Why is it impossible to find the report?

  Finally, we found that it was the memory leak in our internal web application, which was the cause of the crash.

  Thank you for all your help.

• Satellite A660 - driver nVidia kernel crash - even after the update

  Hello

  Can anyone help? For the past two weeks, the screen goes black, momentarily, and I get a message that the nVidia kernel driver crashed and recovered.

  I've updated the driver located on the Toshiba download page and the problem persists. Any useful suggestions?

  See you soon

  EmeraldGem

  Have you tested the common graphics card driver that is part of the Win7?
  Uninstall the graphics driver in Device Manager.
  Restart the unit. Now go to Device Manager and mark the graphic card.
  Then update the driver using the automatic option.
  Usually the Win 7 should automatically find the most recent driver available and certified.

• Help! R40 problems after reformatting

  I meet a lot of problems after reformatting the laptop using the IBM recovery tool that comes with windows xp. After installing the drivers and xp

  -I can't use the trackpoint (mouse) and I see no mouse pointer on my screen

  -the system detects any USB or flash drive

  -Problems of drivers even after installing the latest drivers ethernet network card and mouse. When I tried to install the latest drivers, he said: "the i/o operation was abandoned because of a thread exit or an application request.

  -Tried to install xp sp3 but I said the installation did not complete.

  -Cant even repair windows xp because he says "systemroot system32/ntdll.dll c0000221 unknown hard error".

  Well just solved the DIF. The edition of the ibm recovery software xp sucks. What I did was deleted all the data on the hard drive and install xp using my cd. Then, everything works perfectly.

• Firefox crashes for a single user at startup, even after reset; SafeMode OK.

  Current crashes happen not yet reports of incidents, but maintained two falls earlier today:
  BP-7013aded-0644-47D8-9967-b48a12141013
  BP-cb495f8f-7ae2-4B48-86FF-63b6f2141013

  It shows the same plugins installed and two extensions which are activated in the profiles of other users of this system startup in safe mode. It's only that Firefox user who crashes at startup, even after a reset.
  I also uninstalled and reinstalled Firefox. Yet once, it hangs at startup for this user.

  Event Viewer Windows has several entrances for an Application error:

  Name of the failing application: plugin - container.exe, version: 32.0.3.5379, time stamp: 0x54224e6b
  The failed module name: mozalloc.dll, version: 32.0.3.5379, time stamp: 0x54221b67
  Exception code: 0 x 80000003

  but it is not clear that these entries to synchronize with the accidents.

  This crash at startup began this morning; No new software or any other changes to the system (that I know) for several weeks now.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Problem of scanning even after the use of HP print & scan doctor

  Hello

  I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

  It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

  A real quick help will be appreciated...

  Hi alb7039,

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?

  I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?

  

  U44M1I210 - creative cloud help / error U44M1I210 | Install the updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

• My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

  My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

  I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

  A simple fix Terminal can take care of that.

  Open Terminal (you can just tap Terminal in Spotlight to find it).

  Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

  Press enter, give your password if requested, and then try again. You may need to restart your Mac.

  Gene

• uanable to use AKO (Army Knowledge Online) due to problems with the certifacitate security, even after accepting the risks.

  I am familiar with the certificates page when you try to pull up of AKO. Today the attention risk security skipped upward, I pressed the button except add followed to obtain certificate. The window then informed me the site has a valid certificate, but still does not open the site.
  https://www.us.Army.mil/appiansuite/login/login.FCC?type=33554433 & REALMOID=06-000a4cd6-218f-1122-97EA-832f882f0000 & GUID = & SMAUTHREASON = 0 & Method = Get & SMAGENTNAME = $ SM$ 2f723ECL4% 2bJUIHQcnRMBd2KxCCSc % 3d % HP4c7QPYp2KtCVeQ & TARGET = $SM$ http % 3A % 2f % www.us.army.mil%3a81%2fsuite%2fauthenticate.do 2f

  After that I have meet the certificate warning and attempt to get around, I get this message:

  This site offers valid, verified identification. There is no need to add an exception.

  The warning popup still does not allow me to go to the page even after he claims the a valid certificate.