Roles of QoS

Similar Questions

• I want to know about Mackeeper role & how do I do it?

  I want to know about Mackeeper role & how do I do it?

  If I couldn't access this site support once more, so I ask Pl post your comments on my personal mail ID

  < personal information deleted by host >

  Do not install Mac Keeper. See this thread do not install MacKeeper

• HP ENVY M6-1106er: Windows 8 Pro hang up to begin after adding Hyper-V role

  Hello.

  Have a problem with HP ENVY M6-1106er

  After the OEM Win8 upgrade to the Pro version, I added the Hyper-V role for my system and restart the laptop.

  After the restart boot OS freezes on the screen with the HP logo and rotating circles.

  If I disable AMD Virtualization in the BIOS - system starts, but the hypervisor does not work.

  With virtualization enabled in the system BIOS will not start with the Hyper-V role installed.

  Help, please.

  Hello Sir,

  Here's what you need to do.

  1. enter in the BIOS setup and define virtualization as being disabled and reboot the system.

  2. after starting windows 8, enter the control panel and remove the bluetooth driver.

  3. download and install Ralink Bluetooth driver 9.2.101.10 version (SP59632)

  4. restart the system and reactivate the virtualization technology.

  I hope this helps.

• Question about the roles... color coding.

  I have my film blocked in compound clips.  I noticed a number of my compound clips is colored blue, instead of the usual gray.  I'm sure it's on the roles I have attributed in the compound... clips but can not quite understand what it is... WHY compound clips themselves are blue light?

  I was wondering if anyone has a useful quick thought?

  Ben

  

  YYou have the role selected in the roles of the index of the timeline panel.

• R8500: QOS is terrible on this router for $400

  So before you get this router I was using a $20 off of eBay refurbished Linksys router E6500 running DD WRT (Yes, you can run it on this router if you know where to find the firmware for this). In any case, the flow was not the greatest, but I never had problems.

  I have a ReadyNAS RN516 to my office and the backup on my Mac using the time machine office nas. I also have the Charter which gives single 4mbps upload (it's slow, but once he finished the initial and subsequent backup backups are fine). In real life, it's more like 4.75mbps. I have QOS value 3.75 to ensure that my modem is not bufferbloat and kill my connection.

  My problem is however that often my devices slow to a crawl (if more than 5 Ghz wireless or wired) whenever I am downloading. On my other router I just put 4 Mbps as the download limit and all devices than 4mbps equally, and I never had no problem with slowdowns or high pings and lag. No matter what I put the download speed at... He accuses just out for no apparent reason on this router.

  If someone can tell me why free DD WRT software works better than the software on a router for $400? Just curious?

  The new firmware seems to have helped. I changed a few things as well, and it seems to work very well.

  Regarding the comment of routers figure 3 and 4 routers in figure, there must be an improvement on the 2 figure routers and routers multi-3, otherwise what's the point?

  I'm trying the test of the future a little, that's why I chose this router. It doesn't matter if I take it right back and stick with my $ 20 DDWRT router. I do not have the latest and greatest tech (2012 macbook air and several iPhone 6 more ' and a room above the router and I can not even through any speedtests 60mbps (run through the gigabit mac that is wired and I move 65mbps each time.)

  I don't have a fast enough home nas box, but I'd be curious to see wireless local area network speeds. I wonder if I can break even 100 Mbps with this thing...

• N450 CG3000DV2 access to WMM and thus QoS

  I try so divy upward to the bandwidth of the apartment because my roommate likes to broadcast all the day and night.

  Anywho, I have the router wireless modem n450 and comcast as a provider. I connect and where the QoS configuration tab should be, is nothing. I'm thinking maybe I don't have WMM enabled, but that the tab isn't there either... firmware is fine and I tried different browsers and the whole nine yards. There is simply nothing. I don't know what I have to do yet? It has been more than 90 days, so I won't have to pay to call assistance. Thank you everyone!

  EDIT: I checked the manual and it has's it to be able to do

  Hello everyone

  WMM settings are in the advanced settings of Wireless - Advanced Configuration - WMM. Complete QoS is not supported on cable products. We have the manual updated to show this.

  DarrenM

• Why QOS is assign a low priority to speakers/Media Players?

  I have AirPlay speakers, set up around the House and bizzarly NightHawk is assign the latter with a LOW QOS parameter?

  The speakers cut despite an 87% Signal strength to 54 Mbps one another with a 99% to 54Mbs Signal strength two to 2.4 Ghz

  The 5 GHz range is much better - The Lounge speaker (which is the line of sight of the NightHawk 20 ft across the room reports 100% signal strength to 150Mbps.

  And still stutter stall throughout the House.

  These features worked better on the old wifi but have been the subject of wifi sometimes abandonment of all devices where the 'upgrade '.

  I had put the speakers at a higher priority if they came in the attached devices, which, despite the connection to the common Nighthawk and streaming though stuttering audo, are attached to the Nighthawk.

  It of just that I have a bad Nighthawk or are they just as bad?

  Fixed it

  everything works fine now

  returned the NetGear to Amazon bought an Asus

• QOS disabled button

  Upstream and downstream buttons are disabled in Netgear genius, this function is not available.

  My understanding is that it has QOS.

  Thank you.

  

  If used in a different mode that the router THAT QOS will be disabled

• QOS parameters were not set to R6400

  I'll put up my R6400 I just bought and all will lose but it does not appear that the upstream QOS parameter I want to phone IP is to stay together. I go through the Advanced menu and click on the button in front of IP phone, and then click turn on, but when I go back to look at the settings of the IP phone button is again disabled. What should I do to get the rotor to accept QOS for IP phone?

  Hi @MSRadell,

  Once you have checked the box to enable QoS upstream all QoS rules will be applied. The light in the radio button will be highlighted only if you select to change or remove a given rule.

  Kind regards

  Dexter

  The community team

• How to set QoS priority by device and service on C7000 Modem/Router?

  I would like to set the priority to my VOIP (OOMA) connected to the Ethernet port. Don't see anyway in the Engineering menu to access QOS, even if the item appears on other models of Nighthawk...

  Appreciate any advice.

  Hello ceeteebee

  QoS is not apart of the C7000 if you want this feature, you do not buy a cable modem and use one of the routers as the R7000 Nighthawk.

  DarrenM

• HELP Please! AC750 D6000 couldn't change the QoS settings

  Hello

  Could someone teach me how to enable QoS settings in Netgear genius? Currently, it could not be changed, the checkbox is grayed out (just like the inserted picture)

  Thank you!!!

  

  Hello rxishere

  You use the wireless so then I would try to change the wireless channel to see if you get better speeds. If this isn't the case, you can contact your ISP to see if you have found the right speed.

  DarrenM

• Is their extreme Quality of Service (QoS) in apple option?

  Hello world

  Y at - it an option to enable QoS in extreme apple so that we give a VoIP?

  Thanks in advnace.

  Sorry, but no. Apple routers don't support QoS.

• 2012 R2 Standard RDS server role

  Hi, I installed the role of remote desktop and then installed a few applications to first put the server in install mode. Everything worked well. However a colleague then withdrew the role! I wonder if it's ok to reinstall everything the role? It will affect previously installed applications?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Roles of server separate from the virtual machine on a server?

  Hello

  I'm currently learning the server admin so please forgive my ignorance.

  I bought a server and got Win Server R2 2012. Im trying to focus by trial and error and so want to install multiple roles - that I know is not recommended because some may conflict or cause additional problems etc etc - I am not in an operational environment, but trying to imitate such.

  I've read elsewhere that you can put different roles of server on the individual virtual machines - say, for example, the print server role is on a VM that is separate to a file server role, and she needs to be restarted or goes down for some reason any you loose a single service.

  My questions are the following:

  Is this possible?

  Is this desirable?

  Whats software is used to implement this if yes?

  Hyper-V can be used?

  Thank you in advance.

  Fethimidou2006.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.