Rotation screen L220x SoftOSM problem
Tags: Lenovo Products
Similar Questions
-
How to: rotate screen in Windows 7 by a shortcut.
original title: rotating screen in Windows 7 by a shortcut. Others say that Shift + Alt + arrows should do the trick. However, only of dialogue "-the control panel display" works for me.
There are two reasons for shortcuting the task:
- Have you tried to run a GUI GUI is on tour?
- The option is expected to use the rotating monitors - some texts are easier to read in portrait mode, others in the landscape. This suggests that reversal is supposed to take place dozens of times every day.
What Miss me?
Several months have passed since this thread was started, and a lot of things have happened.
I had the same problem with an ATI Radeon card. Here's how I solved it:-The latest version of Catalyst Control Center;
-in the main screen, you have the "Préférences" button click it
-Click on the first option ("Hotkeys" or similar, I have Italian, don'know exactly what the English name)
-In the list, double-click the items that you want to enable and assign a hotkey (for example CTRL-ALT + cursor). The ones meant to rotate the screen are the first four.
-Click OK. Total time required: about 2 minutes.Enjoy! :-)
MAx - Italy -
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.
These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.
Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu
> options > advanced > General
. -
MacBook Pro screen re-recurring problem.
In November 2015, I got a replacement of the screen as my Mac anti-glare treatment wears.
Just one month later, replaced screen got weak horizontal gray bands that goes further, from right to left, I got a replacement of the screen before the end of 2015.
Now, the March 2016, I had some stripes of vertical pixels affected when I apply pressure on the screen. How can I fix?
Just in case you are wondering this odd task between the two, it is the slider. I want to show that the screen has some problems with it, so I place my cursor here to show that this isn't where the screen ends.
It is a hardware problem with no software solution. It will require a replacement.
You have not identified the EXACT MBP model you have and perhaps with the display problem, it could come under this replacement program. Read this link.
https://www.Apple.com/support/MacBookPro-videoissues/
Ciao.
-
Hello!!!
IM Apple Fan.
Purchased IM Ipad2, Ipad4, Iphone6
Last month I already buy s Iphone6 +.
Today I feel unhappy
MY IPHONE 6 'history '.
My touch screen has a problem after downloading the IOS 9.0.2.
Already called and try apple advises the steps. But the problem still occur.
Already done restart of strength. Factory setting Reset also possible. But still the same problem.
Only can be used for a minute. After that... The problem comes in again & again & again...
APPLE.COM
Can U help me
Only products of Apple of love before updating the version 9.0.2
iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.
-
Rotate screen Microsoft Terminal
We want to rotate screen terminal for Windows 2008 R2 server, can someone help us in this area, is this possible with MS Terminal?
Hi Mary,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in TechNet Windows Server.
-
While watching TV Online I pushed my remote keyboard and the image is now on the side and I have no sound. I can't remember how to fix it. Can someone advise please?
-
Original title: when I turn on the computer.
the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.
Hi Cjdaniello,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
You have an another "Black Screen of Death" problem on Vista 64-bit.
You have an another "Black Screen of Death" problem on Vista 64-bit. I downloaded and burned the CD to repair, and it loads fine. However, whenever I go into the options, it is not read my C: drive. It will not restore the system, it cannot run a "Startup Repair" and if I go in the "Command Prompt" and type "C:", it says that the device is not ready, so I can't change the registry to attempt to repair. Am I missing something that I need to do first in "Setup"? Note that without the disc, I go straight to the black screen with cursor. I can't go in Mode safe, I can't perform sticky keys, and I can't do anything else.
Any help here?
Hi AaronTom,
1. you remember to make changes to the computer, after which the issue started?
I suggest that you contact the manufacturer of the system for a Windows Vista DVD, and then try to perform a startup repair using it:
-
Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.
Last month, I had a series of blue screens. The problem points to the files Volsnap.sys or Classpnp.sys.
I have a Dell Precision T3500, running 64-bit Windows 7 Prof. The system is configured with RAID.
Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that. It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.
No idea on how to stop this would be really appreciated! Thank you
Hello
Results verified BlueScreenView WinDBG / DumpCHK.
TrendMicro is most likely part of this question, as it is known to have caused or
make these problems worse. Uninstall it and run the removal tool to prevent
remains of troublecausing. The following recommendations to use during the test,
even better all the time.TrendMicro removal tool
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/------------------------------------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.==========================================================
The Bug_Checks were D1 (19 long happened if he should really
do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
Components of Windows, which means something else led in error.1. Uninstall TrendMicro as it has a role - is not enough to just disable
such that it will still load chunks of itself in memory.2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
or other corruption could be at stake. Classpnp.sys is the SCSI class system
dll checking and disk problems will affect the it. Run SFC/scannow, and then
Checkdisk (chkdsk /f r).Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=========================================================
Other troubleshooting methods:
BCCode: D1 0x000000D1
Check these KBStop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
-
original title: screen turned sideways during the cleaning of the keys. Look in the event viewer shows no case... How to rotate screen?
How to rotate screen? turned on its side during the cleaning of the keys... difficult to use the cursor or anything else because everything is under tension.
Hi Jay,.
Try holding down CTRL and ALT at the same time and then use the arrows to adjust the screen until it is as you wish.
Good luck!
Kosh
-
How to rotate screen? turned on its side during the cleaning of the keys... difficult to use the cursor or anything else because everything is under tension.
Press Ctrl & Alt keys and use the arrows to rotate back.According to the graphics card on your computer, these can be alternatives.Right click on the desktop | Graphics options | Rotation.Right click on the desktop | Screen resolution | Orientation. -
Portege M400 - utillity rotation screen problem
The screen rotation utility, or more exactly the tilt to TOSHIBA accelerometer utilities is incapable of running and comes up with an error unable to open registry, (I got the utility on the site of Toshiba American as they seem to be a little more ahead of the release of the software and updates for their laptops).
However, it seems that the problem is that the software does not work due to refuse access to the registry!
Any ideas on how to give the software the rights to access the registry or a version more work on the software, which works?Hi Oliver
I can only repeat my statements here in the laptop forum and (drivers & tools) software designed for the American market are the same as the substance of the Toshiba Europe!
I m not very surprised that the accelerometer TOSHIBA utility does not work correctly.
That's why I really recommend you to download the version on the Toshiba Europe site and reinstall this tool.I m 90% sure this will work like a dream ;)
-
Angle of Rotation of the screen use + video problems
Hi netpos,.
Recently, I stumbled on the following problem with the video appearance on a portrait based on the Lcd screen.
So, I ve set the DMP to rotate the screen 90 degrees to fit the current orientation of the LCD screen.
Presentations that have images, swf are looking really good. But, if the presentation includes a video file, then the video file does not turn with the rest of the presentation but is presented in landscape orientation (such that it appears the LCD screen was mounted in landscape orientation).
The current solution to do this is to modify (using the video editing) the video and turning at 90 degrees. Then everything seems ok.
But, in doing so, the whole appearance of the video is reduced and also, time is lost as well!
If anyone has encountered this before?
Thanks to you all
Hello
What you describe works as expected. The DMP will NOT alter the video.
If the video is the film in 'landscape' or 'big' screen, the video will be played
in the original mode, even if the display is shot in portrait mode.
The video must be registered with mode\vertical portrait in mind. If this is not
the video will need to be changed via an application of part 3 to fit the dimensions of
You vertical video object.
If this answers your question, take the time to mark this
discussion answered & rate the answer.
Thank you!
T.
-
Problems with the Ideapad z570, rotating screen
Hi im new on this computer laptop lenovo, I have just started using it for games and have discovered that the screen rotates when you hold Ctrl + alt + arrow, these are keys that I use repeatedly to gaimg every minute or if I need to fix the screen, which is not easy all in game. I was wondering if there was a way to disable this feature, also something like used im for apple im not use to have the windows button (I think it's what his name), between Fn and Alt, disable this button so how far is. As I said im new on this laptop and have not been able to find ways to do this, would be grateful for the help.
Thank you
Hello sam_marquis,
It is a shortcut of your video card driver.
To disable them, just do a right click anywhere on your screen and select Graphics Options, then keys shortcut, then clear.
Refer to the mentioned below web link to disable the Windows key.
http://support.Microsoft.com/kb/216893
Best regards
Tanuj
Maybe you are looking for
-
Old updates/downloads can be deleted?
I downloaded as more than 100 updates over the years. When a new update is downloaded, can I remove the old updates? I hope MSFT will automatically clean the old updates or provide a tool for this. Thank you.
-
Reinstall Windows Vista, when I lost the CD
Hello I bought my laptop about 18 months ago and it came with the OS CD. I recently moved and lost the CD in the gesture, but because of a few mistakes, I need to wipe my computer and reinstall Vista. Is it possible to do this without the CD? Thank y
-
Loading libraries of dynamic links customized for every application
Can someone tell me why I get this warning in my system (ID:11 event) Event Viewer whenever Windows7 x 64 boots? Should I worry about this? Is there anything I can do to make it go away? Walt
-
my HP photosmart Plus B210 won't print black. a cartridge Printhead Cleaner would help?
my HP printer has been activated in May 2010. How his cleaned print head?
-
Hello I downloaded and tried CCA and find it very useful but I can't understand how to create the vertical bar | at the CCA. I use Mac OS X and Windows 7, and on both OS CCA does not recognize the standard shortcuts to the BONE for the Pipe symbol. I