Router VPN number AAA

Hello

We have a router - ASA VPN internet. ASA is the central site, the router is on the remote site. We have an ACS server in the central site behind the ASA, need us the remote router do AAA with the ACS server when someone it connect now. I added the config on ACS and the router, but the problem is remote site router cannot reach the ACS server unless the source IP is ip LAN. Anyone know if we can define the source ip address to ip LAN for package reqeust AAA on the router?

Thank you. Leo

Leo-

Ganymede IP source interface FastEthernet0/0

It will be useful.

Tags: Cisco Security

Similar Questions

  • Route VPN site to site on one path other than the default gateway

    I want to route VPN site-to-site on one path other than the default gateway

    ASA 5510

    OS 8.0 8.3 soon

    1 (surf) adsl line interface default gateway

    line 1 interface SDSL (10 VPN site-to-site)

    1 LAN interface

    What's possible?

    Thank you

    Sorry for my English

    Here is the assumption that I will do:

    -Your IP SHDL is 200.1.1.1, and the next hop is 200.1.1.2

    -Your LAN-to-LAN ends on this interface (interface card crypto SHDL)

    -VPN peer 1 - 150.1.1.1 and LAN is 192.168.1.0/24

    -VPN peer 2 - 175.1.1.1 and LAN is 192.168.5.0/24

    This is the routing based on the assumption above:

    Route SHDL 150.1.1.1 255.255.255.255 200.1.1.2

    Route SHDL 175.1.1.1 255.255.255.255 200.1.1.2

    Route SHDL 192.168.1.0 255.255.255.0 200.1.1.2

    Route SHDL 192.168.5.0 255.255.255.0 200.1.1.2

    Hope that helps.

  • Static and NAT router to router VPN

    Hello

    I have two site VPN using routers. The VPN is fine, BUT - at the end of the seat, the customer has NAT entries static to allow incoming connections - any service that has a NAT static to allow incoming connections from the Internet is inaccessible in the same way. Ping, for example, doesn't have this problem because there is no static NAT entry. I tried to configure a route map-"No. - nat" according to the http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a00800949ef.shtml , I thought I was working.

    H.O. has the IP 131.203.64.0/24 and 135.0.0.0/24 (I know, I know - I'm trying to change), and the R.O. 192.168.1.0/24.

    Bits of configuration:

    IP nat inside source overload map route SHEEP interface Ethernet0

    IP nat inside source static tcp 135.0.0.248 131.203.100.27 3389 3389 extensible

    (other static removed)

    Int-E0-In extended IP access list

    ip permit 192.168.1.0 0.0.0.255 any

    (other entries deleted)

    access-list 198 deny ip 131.203.64.0 0.0.0.255 192.168.1.0 0.0.0.255

    access-list 198 deny ip 135.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255

    access-list 198 allow ip 135.0.0.0 0.0.0.255 any

    SHEEP allowed 10 route map

    corresponds to the IP 198

    1 remove the static entry for the specified host the VPN problem, but obviously breaks things :(

    2. as mentioned, the VPN itself works fine, I can ping hosts perfectly.

    Any help greatly appreciated :)

    Thank you

    Mike.

    You must use the option of the route to the static NAT map. This is a new feature in 12.2 (4) T according to this page:

    http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios123/123cgcr/ipras_r/ip1_i2g.htm#1079180

    He must do exactly what you want. The old, another way to do is use "The thing", where you create a loopback interface and don't make a nat interface and use routing strategy for routing VPN traffic to one address on the same subnet as the loopback interface, but not the address of the loop. IOS then that réacheminera traffic to the real destination (in this case the remote VPN site), but since now it is not a 'ip nat inside' interface, the static nat translations does not apply and the VPN traffic will not be translated. The problem with this solution is that all loopback traffic is switched to the process, so it is a bit of a hack, but these things are sometimes necessary.

    HTH

  • Router VPN 3005 and 7500

    Hi all

    Could you someboy help me on that?

    I have a network like this:

    Internet Internet

    | |

    router VPN - 3005

    |

    Internal

    I can set up Lan to Lan VPN 3005 and other PIX aside, but I can't ping internal network with the back of my internal network. I've already put the static route to the subnet of setbacks in the router and my subnet route internal VPN. What should I do? Thanks in advance.

    Banlan

    in fact the 3000 can do a ping will depend on your network-lists / lists access so that my not be a relevant question.

  • IOS router + VPN + ACS downloadable IP ACL

    I want to use the function "Downloadable IP ACL" 3825-router VPN (OI 12.4 T) in combination with a CBS.

    In many documents and discussions, I read that it is possible to use the DACLs on "devices Cisco IOS version 12.3 (8) T or higher.

    Authentication and authorization by the AEC works and the device gets some settings of the av-pair-feature.

    I have tried several things to apply the DACL as the use of av pairs or ACS "Downloadable IP ACL" function, but nothing works.

    In the debug log, I see that the av pair is transmitted to the device, but it is not used.

    --> Can you tell me, is it possible to use the DACLs on the IOS routers?

    --> How does it work? What can I change?

    --> Is there a good manual to apply it?

    Thanks for your help!

    Martin

    It would be useful to know the PURPOSE of what you're trying to do...

    AFAIR client config mode requires no ACL for filtering short tunnel split ACL... and I have no way to test right now.

    If you want to allow or not some clients access to certain subnets why not investigate tunneling ACL and vpn-filter in combination with ACS split will rather than for the DACL.

  • Unusual routing VPN configuration

    Hi, I use a PIX 525 to our main site, and one of the remote sites using a router in 1721. The 1721 connects to the LAN. All traffic is forced to use a virtual private network between the remote sites and main. The intention was to force the internet traffic from the remote site through the filter of content on the main site, rather than use the split tunneling to leave straight out to the internet through their DSL connection.

    The problem is that, of course, internet traffic this VPN comes back the PIX, Internet. Our content filter reflects the way of the switch connected to the internal interface of a PIX.

    I need to find a way to route VPN traffic from the remote site to an ethernet on the PIX interface which will be connected to our switch stack. If I can do this without breaking the VPN, traffic should be filtered on the main façade and through VPN to the remote side.

    Yes, you're pretty much toast unless:

    you choose to configure a web proxy to Headquarters and set up remote PCs to use it. In this way, they use a proxy that is located behind the 8e6.

    Same pix os 7 will not help, as all nat occurs on this topic - just remote communication will flow through the pix, never hit its physical interface or internal switch ports inside and so the 8e6.

  • 5 routing VPN site

    Hi all

    I threw myself little in this project without a lot of lead in.  Basically, we have 5 sites

    Site A: HQ with ASA 5520

    Site B: Remote with 5505 with L2L at Site A

    Site C: Remote with 5505 with L2L at Site A

    Square D: distance with 5505 with L2L at the Site

    Site E: Remote with 5505 with L2L at Site A

    In an emergency, I had to get phone running systems when a T1 PTP line was cut at the beginning by the customer! I created a VLAN on each phone named 5505 and created the Tunnels of VPN L2L all return to the HQs 5520.  Everything was good in the neighborhood, phones were talking about main PBX server to HQ, we could compose and in no problem.  The problem is now the phone Vender tells us that we need routing between each site. We cannot compose between each remote site without using external number (whereas before you dial internal extensions in order to reach all other sites)

    Site B needs to talk to the PBX to C, D and E (A, obviously as well but that is already at work) and so on.

    I found topics dealing with 2 remote sites requiring a routing, however, with 4 that all need to routing to the other configs will very quickly very vast and complicated.  There is already extra virtual private networks to of the HQ 5520 who go elsewhere and a good amount of security configurations, so the config is already pretty decently sized.

    Is there a better way to do this, or should I start to write my setups now?

    If I understand your question, you need to configure a list of VPN networks on each VPN Ray and the hub.

    For example on the RADIUS B a crypto access list that is similar to:

    ip-> A B permit

    ip-> C B permit

    ip-> D B permit

    ip-E > B permit

    corresponding Cryptography ACL on the hub for talks would be like:

    IP-> B to allow

    IP C-> B permit

    allow the ip D-> B

    E-> B ip license

    Repeat for each Department accordingly.

    So basically your configuration crypto would ' t grow, only the ACL crypto.

    You can work with groups of objects to simplify the ACL crypt, in this case:

    Crypto ACL on Hub B:

    object-group VoIP-dst

    object A

    object C

    object D

    object E

    object-group VoIP-src

    object B

    permit ip src VoIP VoIP-dst

    And so on...

    Just make sure your config allows same-security-traffic intra-interface

  • Problem on site to site and between router vpn client series 2,800

    Hello

    I need a little help.

    I have 2 office of connection with a site to site vpn

    Each site has a dry - k9 router 800 series.

    Each router has actually client ipsec vpn active and all users can connect by using the client vpn with no problems.

    I added the lines for the vpn site to another, but the tunnel is still down.

    Here the sh run and sh encryption session 2 routers:

    OFFICE A

    version 15.3
    horodateurs service debug datetime msec
    Log service timestamps datetime msec
    no password encryption service
    !
    OFFICE-A-DG host name
    !
    boot-start-marker
    boot-end-marker
    !
    AQM-registry-fnf
    !
    !
    AAA new-model
    !
    !
    AAA authentication login default local
    AAA authentication login xauthlist local
    AAA authorization exec default local
    AAA authorization exec vty group xauthlocal
    AAA authorization exec defaultlocal group bdbusers
    AAA authorization groupauthor LAN
    !
    !
    !
    !
    !
    AAA - the id of the joint session
    !
    Crypto pki trustpoint TP-self-signed-220561722
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 220561722
    revocation checking no
    rsakeypair TP-self-signed-220561722
    !
    !
    TP-self-signed-220561722 crypto pki certificate chain
    certificate self-signed 01
      
    quit smoking
    !
    !
    !
    !

    !
    !
    dhcp WIRED IP pool
    Network 10.0.0.0 255.255.255.0
    router by default - 10.0.0.254
    Server DNS 10.0.0.100
    !
    !
    !
    8.8.8.8 IP name-server
    no ip cef
    No ipv6 cef
    !
    !
    !
    !
    !
    Authenticated MultiLink bundle-name Panel
    !
    !
    !
    !
    !
    !
    !

    !
    !
    !
    !
    !
    VDSL controller 0
    !
    property intellectual ssh rsa ssh key pair name
    property intellectual ssh version 2
    property intellectual ssh pubkey-string
     
    !
    !
    crypto ISAKMP policy 3
    BA 3des
    preshared authentication
    Group 2
    !
    crypto ISAKMP policy 20
    md5 hash
    preshared authentication
    OFFICE-B-IP address ISAKMP crypto key XXXXX
    !
    ISAKMP crypto client configuration group remoteusers
    key XXXX
    DNS 10.0.0.100
    WINS 10.0.0.100
    domain.ofc field
    pool ippool
    ACL 101
    !
    !
    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
    tunnel mode
    Crypto ipsec transform-set esp - esp-md5-hmac xauathtransform
    tunnel mode
    !
    !
    !
    Crypto-map dynamic dynmap 10
    Set transform-set RIGHT
    Crypto-map dynamic dynmap 20
    Set transform-set RIGHT
    !
    !
    map clientmap client to authenticate crypto list userathen
    card crypto clientmap isakmp authorization list groupauthor
    client configuration address map clientmap crypto answer
    10 ipsec-isakmp crypto map clientmap Dynamics dynmap
    20 ipsec-isakmp crypto map clientmap
    defined OFFICE-B-IP peer
    Set transform-set RIGHT
    match address 115
    !
    !
    !
    !
    !
    !
    !
    ATM0 interface
    no ip address
    No atm ilmi-keepalive
    PVC 8/35
    aal5mux encapsulation ppp Dialer
    Dialer pool-member 1
    !
    !
    interface Ethernet0
    no ip address
    Shutdown
    !
    interface FastEthernet0
    INTERNAL description
    switchport access vlan 10
    no ip address
    !
    interface FastEthernet1
    no ip address
    Shutdown
    !
    interface FastEthernet2
    switchport access vlan 10
    no ip address
    !
    interface FastEthernet3
    switchport access vlan 10
    no ip address
    !
    interface Vlan1
    no ip address
    Shutdown
    !
    interface Vlan10
    IP 10.0.0.254 255.255.255.0
    IP nat inside
    IP virtual-reassembly in
    !
    interface Dialer0
    the negotiated IP address
    NAT outside IP
    IP virtual-reassembly in
    encapsulation ppp
    Dialer pool 1
    Authentication callin PPP chap Protocol
    PPP pap sent-name of user password xxx xxx 0
    clientmap card crypto
    !
    router RIP
    version 2
    10.0.0.0 network
    network 192.168.1.0
    !
    IP local pool ippool 10.16.20.1 10.16.20.200
    IP forward-Protocol ND
    no ip address of the http server
    no ip http secure server
    !
    !
    the IP nat inside source 1 interface Dialer0 overload list
    overload of IP nat inside source list 101 interface Dialer0
    IP route 0.0.0.0 0.0.0.0 Dialer0
    !
    !
    access-list 22 allow 10.16.20.0
    access-list 22 permit 10.16.20.0 0.0.0.255
    Note access-list 101 * ACL SHEEP *.
    access-list 101 deny ip 10.0.0.0 0.0.0.255 10.16.20.0 0.0.0.255
    access-list 101 permit ip 10.0.0.0 0.0.0.255 any
    access-list 115 permit ip 10.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255
    !
    !
    !
    control plan
    !
    !
    !
    MGCP behavior considered range tgcp only
    MGCP comedia-role behavior no
    disable the behavior MGCP comedia-check-media-src
    disable the behavior of MGCP comedia-sdp-force
    !
    profile MGCP default
    !
    !
    !
    !
    !
    Line con 0
    no activation of the modem
    line to 0
    line vty 0 4
    exec-timeout 0 0
    preferred transport ssh
    transport input telnet ssh
    !
    Scheduler allocate 20000 1000
    !
    end

    OFFICE B

    OFFICE-B-DG host name
    !
    boot-start-marker
    boot-end-marker
    !
    AQM-registry-fnf

    !
    AAA new-model
    !
    !
    AAA authentication login default local
    AAA authentication login xauthlist local
    AAA authorization exec default local
    AAA authorization exec vty group xauthlocal
    AAA authorization exec defaultlocal group bdbusers
    AAA authorization groupauthor LAN
    !
    !
    !
    !
    !
    AAA - the id of the joint session
    !
    Crypto pki trustpoint TP-self-signed-1514396900
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 1514396900
    revocation checking no
    rsakeypair TP-self-signed-1514396900
    !
    !
    TP-self-signed-1514396900 crypto pki certificate chain
    certificate self-signed 01
      
    quit smoking

    !
    !
    8.8.8.8 IP name-server
    no ip cef
    No ipv6 cef
    !
    !
    !
    !
    !
    Authenticated MultiLink bundle-name Panel
    !
    !
    !
    !
    !
    !
    !
    license udi pid C887VAM-K9 sn FCZ191362Q7
    !
    !

    !
    !
    !
    !
    VDSL controller 0
    !
    property intellectual ssh rsa SSH key pair name
    !
    !
    crypto ISAKMP policy 1
    md5 hash
    preshared authentication
    !
    crypto ISAKMP policy 3
    BA 3des
    preshared authentication
    Group 2
    !
    crypto ISAKMP policy 20
    md5 hash
    preshared authentication
    encryption XXXX isakmp key address IP-OFFICE-A

    !
    ISAKMP crypto client configuration group remoteusers
    key xxxx
    DNS 192.168.1.10
    WINS 192.168.1.10
    rete.loc field
    pool ippool
    ACL 101
    !
    !
    Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
    tunnel mode
    Crypto ipsec transform-set esp - esp-md5-hmac xauathtransform
    tunnel mode
    Crypto ipsec transform-set esp - esp-md5-hmac rtpset
    tunnel mode
    !
    !
    !
    Crypto-map dynamic dynmap 10
    Set transform-set RIGHT
    Crypto-map dynamic dynmap 20
    Set transform-set RIGHT
    !
    !
    map clientmap client to authenticate crypto list userathen
    card crypto clientmap isakmp authorization list groupauthor
    client configuration address map clientmap crypto answer
    10 ipsec-isakmp crypto map clientmap Dynamics dynmap
    20 ipsec-isakmp crypto map clientmap
    peer IP-OFFICE-A value
    Set transform-set RIGHT
    match address 115
    !
    !
    !
    !
    !
    !
    !
    interface Loopback1
    no ip address
    !
    ATM0 interface
    no ip address
    No atm ilmi-keepalive
    PVC 8/35
    aal5mux encapsulation ppp Dialer
    Dialer pool-member 1
    !
    !
    interface Ethernet0
    no ip address
    Shutdown
    !
    interface FastEthernet0
    switchport access vlan 30
    no ip address
    !
    interface FastEthernet1
    switchport access vlan 30
    no ip address
    !
    interface FastEthernet2
    switchport access vlan 20
    no ip address
    !
    interface FastEthernet3
    switchport access vlan 10
    no ip address
    !
    interface Vlan1
    no ip address
    Shutdown
    !
    Vlan30 interface
    IP 192.168.1.254 255.255.255.0
    IP nat inside
    IP virtual-reassembly in
    !
    interface Dialer0
    the negotiated IP address
    NAT outside IP
    IP virtual-reassembly in
    encapsulation ppp
    Dialer pool 1
    Authentication callin PPP chap Protocol
    PPP pap sent-name to user
    clientmap card crypto
    !
    router RIP
    version 2
    10.0.0.0 network
    network 192.168.1.0
    !
    IP local pool ippool 10.16.20.201 10.16.20.250
    IP forward-Protocol ND
    no ip address of the http server
    no ip http secure server
    !
    !
    the IP nat inside source 1 interface Dialer0 overload list
    overload of IP nat inside source list 101 interface Dialer0
    IP nat inside source static tcp 192.168.1.100 5060 interface Dialer0 5060
    IP nat inside source static tcp 192.168.1.100 5061 interface Dialer0 5061
    IP nat inside source static tcp 192.168.1.100 5062 interface Dialer0 5062
    IP nat inside source static tcp 192.168.1.100 5063 5063 Dialer0 interface
    IP nat inside source static tcp 192.168.1.100 5064 interface Dialer0 5064
    IP nat inside source static udp 192.168.1.100 5060 interface Dialer0 5060
    IP nat inside source static udp 192.168.1.100 5061 interface Dialer0 5061
    IP nat inside source static udp 192.168.1.100 5062 interface Dialer0 5062
    IP nat inside source static udp 192.168.1.100 5063 5063 Dialer0 interface
    IP nat inside source static udp 192.168.1.100 5064 interface Dialer0 5064
    IP nat inside source static tcp 192.168.1.100 3541 interface Dialer0 3541
    IP nat inside source static udp 192.168.1.100 3541 interface Dialer0 3541
    IP route 0.0.0.0 0.0.0.0 Dialer0
    !
    !
    sheep allowed 10 route map
    corresponds to the IP 150 101
    !
    access-list 22 allow 10.16.20.0
    access-list 22 permit 10.16.20.0 0.0.0.255
    access list 101 deny ip 192.168.1.0 0.0.0.255 10.16.20.0 0.0.0.255
    ACCESS-list 101 permit ip 192.168.1.0 0.0.0.255 any
    access-list 115 permit ip 192.168.1.0 0.0.0.255 10.0.0.0 0.0.0.255
    !
    !
    !
    control plan
    !
    !
    !
    MGCP behavior considered range tgcp only
    MGCP comedia-role behavior no
    disable the behavior MGCP comedia-check-media-src
    disable the behavior of MGCP comedia-sdp-force
    !
    profile MGCP default
    !
    !
    !
    !
    !
    Line con 0
    no activation of the modem
    line to 0
    line vty 0 4
    exec-timeout 0 0
    password Password02
    preferred transport ssh
    transport input telnet ssh
    !
    Scheduler allocate 20000 1000
    !
    end

    Thanks in advance for any help :)

    the site at the other tunnel is mounted, but it does not pass traffic; What is the source and destination ip on the router that you are trying to ping the address

    whenever you try to open the traffic from router A to router B, you must to the source of the traffic.

    for ex,.

    Router A-->10.1.1.1--fa0/0

    Router B - 172.168.1.100

    source of ping 172.168.1.100 router # 10.1.1.1

    After doing the pings, send the output of the show counterpart of its crypto ipsec at both ends

  • EZVPN 2811 router VPN module

    Hi all

    I have a spare 2811 router that would like to use for the temporary easy VPN server.

    the router IOS is already updated security advance 15.0 K9.

    My question is the AIM - VPN a real map/module on the motherboard of the router or just pop up once the router has been upgraded to IOS security?

    SH ve | I have IOS
    Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 15.0 (1) M8, RELEASE SOFTWARE (fc1)

    #sh inv
    NAME: "2811 chassis', DESCR:"2811 chassis.
    PID: CISCO2811, VID: V02, SN: FTX0911Cxxx

    NAME: ' PVDMII DSP SIMM with a DSP on the Slot 0 SubSlot 4 ', DESCR: 'PVDMII DSP SIMM with a DSP.
    PID: PVDM2-16, VID: V01, SN: FOC13071xx

    NAME: "virtual private network (VPN) on the Slot Module 0 ', DESCR: 'encryption PURPOSE Element '.
    PID: AIM-VPN/EPII-PLUS, VID: v01, SN: FOC09072xx

    You have now two VPN modules in your router:

    1. The module for basic needs
    2. The module see you in "inventory to see the" which is placed in the OBJECTIVE of on-board connector. This module has a flow more and a greater number of tunnel and will be used by default.

    There are many examples of EzVPN configuration guide:

    http://www.Cisco.com/c/en/us/TD/docs/iOS-XML/iOS/sec_conn_esyvpn/configuration/15-Mt/sec-easy-VPN-15-Mt-book/sec-easy-VPN-Srvr.html

    If it is more then a temporary solution, I would also consider using an ASA to remote access VPN. EzVPN is more or less obsolete, and the ASA has many more features with the AnyConnect client. On the router, you can also configure remote access for AnyConnect, but it is much more complicated.

  • IOS router VPN client

    Hi all

    I have 2 sites connected through a VPN between 2 IOS routers.

    I have also some customers switched that need to connect on the inside network via a VPN with one of the routers.

    The VPN client software is enough or should I take into account the other components (for example an AAA for Xauth server)?

    Someone at - it an example configuration for the router IOS?

    Thank you

    If you more security, you can use the aaa server:

    http://www.cisco.com/warp/public/707/ios_usr_rad.html .

    You can also perform local authentication on the router:

    http://www.cisco.com/warp/public/471/ios-unity.html .

    Kind regards

    Eric

  • Routing VPN problem

    Hello

    We need to connect from an external computer connected by cisco-vpn-client to an internal server that is behind an ASA 5505 with easy VPN config. The VPN connection with the customer at our 5520 firewall is good, but when I try to connect to the server on the LAN, Journal FW says:

    Could not locate the next hop for TCP from Internet:172.17.1.215/1108 to Lan_Interna:172.33.0.50/3389 routing

    Image attached.

    Can you help me?

    Concerning

    David

    There are a number of misrepresentations of NAT, which should be deleted:

    NAT (Lan_Interna, DMZ) source INTRANET_LISBOA INTRANET_LISBOA static non-proxy-arp

    NAT (Lan_Interna, any) static source INTRANET_LISBOA INTRANET_LISBOA static destination DMZ DMZ non-proxy-arp

    NAT (Lan_Interna, any) static source INTRANET_LISBOA INTRANET_LISBOA VPN_REMOTE_ACCESS VPN_REMOTE_ACCESS non-proxy-arp static destination

    On the VPN Client road section, you see the 2-way, or there is just 1 road 0.0.0.0?

    In addition, you have reconnected the ASA5505? If you have, how is there no IPSec security association? There should be a for this peer IPSec security association, otherwise, it will not work. Can you access the main site of the ASA5505?

  • Connect to the router VPN using PPTP (Ubuntu)

    Hello

    As I mentioned in other post, I try to get the VPN works for my Ubuntu workstation. I'm not an expert of VPN, so I need help.

    So far, people seem to agree that pptp is easier to config that IPSec (under Linux platform). Select the PPTP Protocol and add a user account for the Linksys router.

    Now, the Linux part.

    I have pptp-linux installation (it is the best client for linux pptp seams). I try to set it up, but I missed something relatd to coding or something.

    I try to follow this documentation: https://help.ubuntu.com/community/VPNClient#PPTP

    When I run this command: pon myvpn nodetach

    I get the following error:

    Using interface ppp0
    Connect: ppp0 <-->/dev/pts/2
    MPPE required, but not executed [v2] MS-CHAP authentication.
    Connection down.

    Here is the log of the router:

    15 Oct 21:51:02 2008 Client Remote System Log [] disconnect PPTP server.

    Kind regards

    Hello

    Thanks for your help and this useful link.

    I have change my configuration file and I managed to set up the pptp connection.

    Here the configuration file that I use (for people with the same problem):

    RemoteName until-vpn
    LinkName until-vpn
    ipparam entmd-vpn
    Pty "pptp exemple.dyndns.org - nolaunchpppd.
    name budderball
    usepeerdns
    require mppe
    garbage-eap
    /noauth
    file /etc/ppp/options.pptp

    Also, I change the contents of/etc/ppp/chap-secrets:

    Budderball until vpn-based *.

    With this configuration, I can launch the tunnel and communicate with the gateway and LAN.

    Here the command line I use to establish the connection and than create road so that any request for 192.168.1.0/24 use the ppp0 interface.

    sudo pon entmd-cpn debug dump logfd 2 nodetach

    sudo route add - net 192.168.1.0 netmask 255.255.255.0 dev ppp0

    Finally, by reading the documentation, I found a plugin for Network Manager. It's a work like a charm.

    For ubuntu: sudo apt - get install network-manager-pptp

    An installation, you must restart to 'activate' the plugin. (this is a bug)

    You can use the network - manager to configure your pptp connection. I intend to post a wikiw on the Ubuntu Wiki page.

  • Cisco VPN router VPN client commercial provider

    Hello

    IM new Cisco VPN technology so please forgive my ignorance.

    I am trying to connect my router to a comercial that support IPSec VPN provider gave me only that here the server ip, user name and password Secret.

    With this information, that I can, for example, to connect with an iPhone using the monofamille in Cisco's VPN IPSec.

    My question is how I put this up directly on a cisco router, or using CCP or config?

    Thanks in advance for all the help/pointers

    with the info given, there are the following config:

    Crypto ipsec VPN ezvpn client
    connect auto
    Astrill key way2stars group
    client mode
    Peer 1.2.3.4
    Astrill-email Astrill-password username password

    Sent by Cisco Support technique iPad App

  • RA on IOS router VPN

    Hello Experts,

    Can someone send me the link on how to set up remote access VPN on Cisco IOS routers (authentication of remote users based on user names configured locally on the router itself)?    I found a few links, but they are all authencating by certificate, LDAP users.     I need authentication direct simple remote control-users by using the name of normal user/pass created on the router IOS locally.

    I don't have CA or LDAP server to authenticate remote users.  I just need simple authentication as what Cisco ASA.

    Hi Wade,.

    In addition to this shared Neno, you can check this link to third party which is pretty clear:

    http://www.tunnelsup.com/remote-access-VPN-connection-using-a-Cisco-router

    Kind regards

    Aditya

    Please evaluate the useful messages and mark the correct answers.

  • Router VPN, where to place?

    I have a Cisco ASA NAT fact.

    I have a 2801 with OBJECTIVE VPN.

    Should I place external int of the router outside the firewall and internal int of the router in the DMZ of firewall IOS execution of ASA-then on the outside... or place the external int of the router in the DMZ - ASA and internal int of the router network internally, then do a NAT one to one in external int of the router with ASA? If I do the 2nd option, I have headaches with NAT and IPSec tunnels? More precisely if I want to protect the public NAT had the IP address of the servers in a DMZ instead of private so I don't overlap LANs...?

    Thank you!

    I knew of your sugestion ecrypted ipsec rehbeh will go to the DMZ-1 for the router, and then after it cracked me he switch to the router on the inside interface, then to the ASA dmz-2 finally to the asa inside the interface to the private network.

    It is good for security but a cuple of disadvantages as u mentioned it will be higher performance on the firewall and it will consume more public ip address and interfaces

    as I sujested before

    and also it is sujested by sevral cisco cruises and the design of the security templates

    It's better to divide your network to the security layer

    so when you put the router in front of the fire wall, it will be considered as router permiter and at this point, you can allow only know good circulation (called model of security policy) and also to terminate the vpn on it so the vpn will be decrypted for the firewall (the idea even URS) while the vpn connection traffic will be exposed to the firewall for inspection for example inspection request extra packages for the filltering filltering been on the permiter router, mybe will be sent to the AIP - ssm IPS firewall model for inspection signtures (called model signture who deny traffic unfamiliar)

    will, is also part of the security in the deployment depth

    Thank you and so useful rates

Maybe you are looking for

  • Fluid was detected in the connector of the lightning.

    I get a warning when my iPhone is plugged into its lighting cable saying 'Disconnect accessory lightning' "Liquid has been detected in the connector of the lightning" ' to protect your iPhone, unplug this accessory of lightning, and allow the connect

  • basic calculations

    I just bought this calculator and began to learn how to use it. I tried to divide 10 by 16533 but do not get a conclusion when the function is pressedwhy? The operating mode is RPN.

  • Support Web of Tablet Sony site

    All, We just released the Web of Tablet from Sony Support site. Feel free to visit the website of tutorials, Knowledge Base articles and many tutorials: http://eSupport.Sony.com/us/Perl/select... ODTYPE = 110.

  • streaks

    Hello, I have an officejet pro 8600 and the streaks of scan all colors when I try to scan a jpg. It doesn't happen when I print in pdf. Ive done the diagnosis of the print cartridge and it made no difference. Thank you

  • Michael Kossar: Concept of 32-bit and 64-bit

    I'm Michael kossar, I heard the term 32-bit and 64-bit machine, but what is the concept behind it? Please explain my question.