RRAS do I need VPN connected users internet access through my firewall internal

Similar Questions

• No internet access through VPN

  Hi, I have the router Cisco 881 (MPC8300) with c880data-universalk9 - mz.153 - 3.M4.bin when users establish a VPN connection to the corporate network, had access to all the resources but no internet access, please help me what else I need to configure to achieve my goal. I don't want to split the tunnel, internet via VPN, users must have. In my opinion, I have put an additional configuration for NAT, but my router not recognize u-Turn and NAT commands on the object on the network.

  My config:

  Building configuration...

  Current configuration: 13562 bytes
  !
  ! Last configuration change at 09:52:38 PCTime Saturday, May 16, 2015, by admin
  version 15.3
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  XXX host name
  !
  boot-start-marker
  start the flash system: c880data-universalk9 - mz.153 - 3.M4.bin
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authentication login ciscocp_vpn_xauth_ml_2 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  AAA authorization ciscocp_vpn_group_ml_2 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  iomem 10 memory size
  clock timezone PCTime 1 0
  PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
  !
  Crypto pki trustpoint TP-self-signed-1751279470
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1751279470
  revocation checking no
  rsakeypair TP-self-signed-1751279470
  !
  !
  TP-self-signed-1751279470 crypto pki certificate chain
  certificate self-signed 01
  XXXX
  !
  !
  Protocol-IP port-map user - 2 tcp 8443 port
  user-Protocol IP port-map - 1 tcp 3389 port
  !

  !
  !
  !
  IP domain name dmn.local
  8.8.8.8 IP name-server
  IP-server names 8.8.4.4
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FCZ174992C8
  !
  !
  username privilege 15 secret 5 xxxx xxxx
  username secret VPNUSER 5 xxxx
  !
  !
  !
  !
  !
  !
  type of class-card inspect sdm-nat-user-protocol--2-1 correspondence
  game group-access 105
  corresponds to the user-Protocol - 2
  type of class-card inspect entire game SDM_AH
  match the name of group-access SDM_AH
  type of class-card inspect entire game PAC-skinny-inspect
  Skinny Protocol game
  type of class-card inspect entire game SDM_IP
  match the name of group-access SDM_IP
  type of class-card inspect entire game PAC-h323nxg-inspect
  match Protocol h323-nxg
  type of class-card inspect entire game PAC-cls-icmp-access
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect entire game PAC-h225ras-inspect
  match Protocol h225ras
  type of class-card inspect entire game SDM_ESP
  match the name of group-access SDM_ESP
  type of class-card inspect entire game PAC-h323annexe-inspect
  match Protocol h323-annex
  type of class-card inspect entire game PAC-cls-insp-traffic
  match Protocol pptp
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  type of class-card inspect the correspondence SDM_GRE
  match the name of group-access SDM_GRE
  type of class-card inspect entire game PAC-h323-inspect
  h323 Protocol game
  type of class-card inspect correspondence ccp-invalid-src
  game group-access 103
  type of class-card inspect entire game PAC-sip-inspect
  sip protocol game
  type of class-card inspect correspondence sdm-nat-https-1
  game group-access 104
  https protocol game
  type of class-card inspect all match mysql
  match the mysql Protocol
  type of class-card inspect correspondence ccp-Protocol-http
  http protocol game
  type of class-card inspect entire game CCP_PPTP
  corresponds to the SDM_GRE class-map
  inspect the class-map match PAC-insp-traffic type
  corresponds to the class-map PAC-cls-insp-traffic
  type of class-card inspect entire game SDM_EASY_VPN_SERVER_TRAFFIC
  match Protocol isakmp
  match Protocol ipsec-msft
  corresponds to the SDM_AH class-map
  corresponds to the SDM_ESP class-map
  type of class-card inspect correspondence ccp-icmp-access
  corresponds to the class-ccp-cls-icmp-access card
  type of class-card inspect the correspondence SDM_EASY_VPN_SERVER_PT
  corresponds to the SDM_EASY_VPN_SERVER_TRAFFIC class-map
  !
  type of policy-map inspect PCB - inspect
  class type inspect PCB-invalid-src
  Drop newspaper
  class type inspect mysql
  inspect
  class type inspect PCB-Protocol-http
  inspect
  class type inspect PCB-insp-traffic
  inspect
  class type inspect PCB-sip-inspect
  inspect
  class type inspect PCB-h323-inspect
  inspect
  class type inspect ccp-h323annexe-inspect
  inspect
  class type inspect ccp-h225ras-inspect
  inspect
  class type inspect ccp-h323nxg-inspect
  inspect
  class type inspect PCB-skinny-inspect
  inspect
  class class by default
  drop
  type of policy-card inspect sdm-license-ip
  class type inspect SDM_IP
  Pass
  class class by default
  Drop newspaper
  type of policy-card inspect sdm-pol-NATOutsideToInside-1
  class type inspect sdm-nat-https-1
  inspect
  class type inspect sdm-nat-user-protocol--2-1
  inspect
  class type inspect CCP_PPTP
  Pass
  class class by default
  Drop newspaper
  type of policy-card inspect PCB-enabled
  class type inspect SDM_EASY_VPN_SERVER_PT
  Pass
  class class by default
  drop
  type of policy-card inspect PCB-permits-icmpreply
  class type inspect PCB-icmp-access
  inspect
  class class by default
  Pass
  !
  safety zone-to-zone
  security of the area outside the area
  ezvpn-safe area of zone
  zone-pair security PAC-zp-self-out source destination outside zone auto
  type of service-strategy inspect PCB-permits-icmpreply
  zone-pair security PAC-zp-in-out source in the area of destination outside the area
  type of service-strategy inspect PCB - inspect
  source of PAC-zp-out-auto security area outside zone destination auto pair
  type of service-strategy inspect PCB-enabled
  sdm-zp-NATOutsideToInside-1 zone-pair security source outside the area of destination in the area
  type of service-strategy inspect sdm-pol-NATOutsideToInside-1
  in the destination box source sdm-zp-in-ezvpn1 ezvpn-pairs area security
  type of service-strategy inspect sdm-license-ip
  source of sdm-zp-out-ezpn1 of security area outside zone ezvpn-zone time pair of destination
  type of service-strategy inspect sdm-license-ip
  safety zone-pair sdm-zp-ezvpn-out1-source ezvpn-zone of destination outside the area
  type of service-strategy inspect sdm-license-ip
  safety zone-pair source sdm-zp-ezvpn-in1 ezvpn-area destination in the area
  type of service-strategy inspect sdm-license-ip
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  BA aes 256
  preshared authentication
  Group 2
  !
  Configuration group customer crypto isakmp Domena
  key XXXXXX
  DNS 192.168.1.2
  Dmn.local field
  pool SDM_POOL_1
  Save-password
  Max-users 90
  netmask 255.255.255.0
  banner ^ Cwelcome ^ C
  ISAKMP crypto ciscocp-ike-profile-1 profile
  match of group identity Domena
  client authentication list ciscocp_vpn_xauth_ml_2
  ISAKMP authorization list ciscocp_vpn_group_ml_2
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac ESP_AES-256_SHA
  tunnel mode
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-ESP_AES-256_SHA
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  IP 192.168.9.1 255.255.255.0
  !
  interface FastEthernet0
  no ip address
  !
  interface FastEthernet1
  no ip address
  !
  interface FastEthernet2
  no ip address
  !
  interface FastEthernet3
  no ip address
  !
  interface FastEthernet4
  Description $ETH - WAN$ $FW_OUTSIDE$
  IP x.x.x.x 255.255.255.248
  NAT outside IP
  IP virtual-reassembly in
  outside the area of security of Member's area
  automatic duplex
  automatic speed
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered Loopback0
  ezvpn-safe area of Member's area
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  interface Vlan1
  Description $ETH_LAN$ $FW_INSIDE$
  IP 192.168.1.1 255.255.255.0
  IP access-group 100 to
  IP nat inside
  IP virtual-reassembly in
  Security members in the box area
  IP tcp adjust-mss 1452
  !
  local IP SDM_POOL_1 192.168.10.10 pool 192.168.10.100
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  The dns server IP
  IP nat inside source list 3 interface FastEthernet4 overload
  IP nat inside source static tcp 192.168.1.3 interface FastEthernet4 443 443
  IP nat inside source static tcp 192.168.1.2 8443 interface FastEthernet4 8443
  IP route 0.0.0.0 0.0.0.0 X.x.x.x
  !
  SDM_AH extended IP access list
  Note the category CCP_ACL = 1
  allow a whole ahp
  SDM_ESP extended IP access list
  Note the category CCP_ACL = 1
  allow an esp
  SDM_GRE extended IP access list
  Note the category CCP_ACL = 1
  allow a gre
  SDM_IP extended IP access list
  Note the category CCP_ACL = 1
  allow an ip
  !
  not run cdp
  !
  Note access-list 3 INSIDE_IF = Vlan1
  Note CCP_ACL category in the list to access 3 = 2
  access-list 3 Let 192.168.1.0 0.0.0.255
  Note access-list 23 category CCP_ACL = 17
  access-list 23 permit 192.168.1.0 0.0.0.255
  access-list 23 allow 10.10.10.0 0.0.0.7
  Note access-list 100 Auto generated by SDM management access feature
  Note access-list 100 category CCP_ACL = 1
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq 22
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq www
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq 443
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq cmd
  access-list 100 tcp refuse any host 192.168.1.1 eq telnet
  access-list 100 tcp refuse any host 192.168.1.1 eq 22
  access-list 100 tcp refuse any host 192.168.1.1 eq www
  access-list 100 tcp refuse any host 192.168.1.1 eq 443
  access-list 100 tcp refuse any host 192.168.1.1 eq cmd
  access-list 100 deny udp any host 192.168.1.1 eq snmp
  access ip-list 100 permit a whole
  Note access-list 101 category CCP_ACL = 1
  access-list 101 permit ip 192.168.1.0 0.0.0.255 any
  Note access-list 102 CCP_ACL category = 1
  access-list 102 permit ip 192.168.1.0 0.0.0.255 any
  Note access-list 103 CCP_ACL category = 128
  access-list 103 allow the ip 255.255.255.255 host everything
  access-list 103 allow ip 127.0.0.0 0.255.255.255 everything
  access-list 103 allow ip 93.179.203.160 0.0.0.7 everything
  Note 104 CCP_ACL category = 0 access-list
  IP access-list 104 allow any host 192.168.1.3
  Note access-list 105 CCP_ACL category = 0
  IP access-list 105 allow any host 192.168.1.2

  -----------------------------------------------------------------------
  ^ C
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  access-class 102 in
  transport input telnet ssh
  line vty 5 15
  access class 101 in
  transport input telnet ssh
  !
  !
  end

  I'd be grateful for help

  concerning

  Hello

  Enter the subnet pool VPN to access-list 3 for source NAT

  You may need to check the firewall also rules to allow the connection based on areas you

  HTH,

  Averroès

• The remote VPN Clients and Internet access

  I apologize in advance if this question has already been addressed. I am currently using a PIX Firewall Version 6.1 520 (2) running. I have several remote users that VPN for the PIX. Once the VPN tunnel is started, they are more able to connect to internet from their local computers. Is there a configuation on the PIX that allows remote users to have access to the internet when you are connected to the PIX.

  TIA,

  Jeff Gulick

  The Pix does not allow traffic enter and exit on the same interface. Therefore, a VPN user cannot access the Internet through the tunnel. If you use the Cisco client, enable tunneling split so that all traffic through the tunnel.

  If you use PPTP, you can turn off the option that makes the remote network, the default gateway. However, local routes should be added to these clients when they connect.

  Or you can use an additional interface on the firewall. One that puts an end to VPN tunnels and another providing for Internet connectivity. In this way the traffic is not enter/leave on the same interface.

  Of course, it is preferable if the customer Internet traffic does not go through the tunnel. It wastes your bandwidth and has security problems as well. I suggest you use the client to Cisco and the split tunneling.

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• If I buy a monthly account of xfinity wifi (which allows internet access through the device unique registred) can I use apple TV connected to my TV to the stream of the device on my TV?

  using apple tv to stream xfinity wifi

  The Apple tv needs Internet - wifi or Ethernet. Access normally means places that they have agreements with wifi (i.e. from Starbucks, McDonald's etc.). But you will need a connection Internet for the Apple TV work from your home. Although some use the hotspot on their phone.  You need a speed of ISP at 8mbps for HD streaming on iTunes or netflix requires only 5 for HD (due to compression).

  short answer is that you must get xfinity as your ISP not only access hotspot...

• Cannot connect to Internet access point except on a Jetpack from Verizon.

  I am running Window 7 Home Premium. I can connect to the Internet using my Verizon Jetpack and nothing else. I tried to use my Verizon phone as a hotspot, I have a router Belkon 4. 1A and we tried through other points of access. It connects to the access point according to the plan, but it is XE offline to the Internet. I tried to update my drivers for wireless devices, and it is said that they are already updated.  I can connect when I'm wired. When I check properties properties IPv4 and IPv6 are shoddy outside. Install is the only thing not frayed on. When click on install, I get an error: cannot add the requested feature. the error is: these data are incorrect.  My wireless adapter is Realtek RTL8187SE Wireless LAN PCIE network adapter. Please help me I am so frustrated.

  Hi Sylvia,.

  I imagine the inconvenience that you are experiencing.

  Here are some ways you can follow to resolve the problem:

  Method 1:

  Check out the link and follow the steps in the article:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Flush the DNS and request a new IP address of your ISP server by following these steps.
  a. click on start
  b. click on run
  (c) in the Run dialog box type cmd.exe and click OK
  d. in the command prompt, type the following.

  e. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  output

  Method 3:

  This problem may be caused by incorrect DNS settings. following these steps and check:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Cisco VPN Client anything cannot access through VPN on an ASA5505 8.4

  Hello

  Completely new to Cisco ASA and the need to get this working ASAP.

  8.4 (1) ASA 5505 is the secondary FW and I need to authorize all out and block everything coming, but for the VPN clients.  Since a jerk of Cisco, I used the ASDM and it's sorcerers to make this work, which may explain my situation.

  192.168.101.0/24 is the local network

  192.168.101.5 is the IP of ASA

  192.168.101.2 is the primary FW (and the default gateway for servers, I have to access through the VPN)

  10.10.101.0/24 is the VPN IP range (this can be what you want, I'm not married to it somehow)

  My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x or service server (tried RDP, telnet, ping, etc.)

  Configuration file is attached.

  Help pretty please!

  Thank you.

  Did you add a route for the VPN Pool on the main firewall to the ASA?

  Best regards

  Peer

  Sent by Cisco Support technique iPad App

• Connections of the agent through a firewall

  I have a number of windows servers in a DMZ I need to monitor, and I can't push the holes for each server.  I have a server in the DMZ that can communicate back through the firewall.  Is there a way to put the agents on these computers to communicate through a server which has a connectivity?  I can put whatever I want (server, agent, etc.) on a server, but I need the results to finish on the server inside the firewall.

  I would not put the agents to the same port - I would like to use different.

  You say you have "too much", but there are 65 535 ports without overlap. Indeed I would be impressed if you had that many. :)

• Urgent! Users of remote access VPN connects but cannot access remote LAN (ping, folder,...)

  Hello

  I am setting up a VPN on a Cisco ASA 5510 version 8.4 remote access (4) 1.

  When I try to connect via the Cisco VPN client software, I am able to connect however I am unable to access network resources.

  However, I can ping the servers in the other site that is connected through the VPN site-to site to the main site!

  VPN client--> main site (ping times on)--> Site connected with the main site with VPN S2S (successful ping)

  Please help me I need to find a solution as soon as POSSIBLE!

  Thank you in advance.

  Hello

  Please remove the NAT exemption and the re - issue the command but with #1, so it will place the NAT as first line:

  No nat (SERVERS, external) static source SERVERS_LAN SERVERS_LAN NETWORK_OBJ_10.10.40.8_29 NETWORK_OBJ_10.10.40.8_29 non-proxy-arp-search of route static destination

  NAT (SERVERS, external) 1 static source SERVERS_LAN SERVERS_LAN NETWORK_OBJ_10.10.40.8_29 NETWORK_OBJ_10.10.40.8_29 non-proxy-arp-search of route static destination

  After re-configured this way, make sure that this command is also available:

  Sysopt connection permit VPN

  This sysopt will allow traffic regardles any ACL a fall, just in case. Please continue to run a package tracer and post it here,

  Packet-trace entry Server icmp XXXXXX 8 0 detailed YYYYY

  XXXX--> server IP

  AAAA--> VPN IP of the user

  Don't forget to do the two steps and a just in case, capture Please note and mark it as correct the useful message!

  Thank you

  David Castro,

• can only connect to internet access using wireless or ethernet cable

  I use a computer Windows Vista with Internet Explorer 8.

  When I try to connect to the internet from my laptop on a Netgear router I can connect only with limited access via an ethernet cable or wireless. My computer detects and attempts to connect (with complete connection) to the netgear router, but then the prompt appears on the screen, "connection takes longer than usual." Then, it displays "connection failure.

  I tried to use all the recommended solutions such as move the computer to a different location, automatically get new ip settings, etc... without success.

  In the past, I could access the internet without problems and the full connection and wonder if my college internet connection may have screwed up the settings.

  Thank you

  Hi Travis98,

  You can try to boot into safe mode with network and check if the problem occurs.

  Step 1: to start in Mode safe mode with network you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the Advanced Boot Options screen, use the arrow keys to select the safe mode with networking option and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information, you can consult the following link to start the mode safe mode with networking:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please post back and let us know the results.

  Hope the helps of information.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No internet access through VPN router

  Hi all

  I configure a Cisco 851 router do a VPN site-to site at ASA5510. The VPN works great. I can get to any host behind ASA5510. But the host behind Cisco 851 cannot go to the internet. I have only set up traffic to the subnet behind ASA5510 through the VPN tunnel. The rest of the traffic through 851 internet connection. The part of configuration is listed below. Except the nat by Fa4 VPN traffic. I miss something here?

  Any help is appreciated.

  interface FastEthernet4
  IP address 24.xx.xx.xx 255.255.255.0
  NAT outside IP
  IP virtual-reassembly
  IP tcp adjust-mss 1400
  automatic duplex
  automatic speed
  crypto SITE map
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 24.xx.xx.1
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  IP nat inside source overload map route interface FastEthernet4 sheep
  Ganymede IP source interface Vlan1
  !
  IP extended SITE access list
  permit ip 10.5.x.0 0.0.0.255 10.x.0.0 0.255.255.255
  sheep extended IP access list
  deny ip 10.5.x.0 0.0.0.255 10.x.0.0 0.255.255.255
  allow an ip 10.5.x.0 0.0.0.255

  Lou

  Based on the subset of configuration, it looks correct, you should be able to browse the Internet with the NAT configuration.

  Do you have any ACL applied to your inside interface which may be blocking access? If you perform a traceroute, where the traffic stops?

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• What product can hunt an internal user internet access web site?

  Dear all,

  My client uses ASA 5512, they want to check and record their internal users (employees) visited this site web (HTTP, HTTPS, FTP etc.).

  I have not a clue what cisco product or other reason.

  THX

  The module of firepower on the ASA 5512 - X, when licensed and configured with an appropriate policy, can do this.

  The ASA 5512 - X by itself cannot.

  If you can share "inventory" and "module" we can get some clues on the preparation and the ability to run the module of the unit. We would look for the required and installed SSD sfr module type.

• Limited access to the vpn connection

  We have 3 sites connected with the vpn site-to site cisco Pix 515-525-501. We have also 2 cisco 3005 concentrators vpn for users remote access to the system. I have a remote user that needs to connect to one of our servers in order to manage it. Remote users get internal ip address, once they sign in and they get access to all servers and PCs as if they were at the office. Is it possible to block this specific user and give permission to only to a server?

  Thank you

  Haim defending

  [email protected] / * /.

  Hello

  A much better way to filter traffic is using firewall rules. First, assign a separate group of VPN for your users who need to access that server. Assign a pool to this group.

  Then, go to Configuration-> policy Mgmt-> rules: Add a new rule that will be allor traffic from the pool of the group to that specific server (source is the address of the user, the destination is your server). Create another rule for the return shipping.

  Create a new filter (Configuration-> policy Mgmt-> filter): Add the two rules created earlier.

  Go back to the remote access and then apply the filter itself (you can find the firewall drop-down list in the 'Général' tab) and... VOILA

  Rate if all ok.

  See you soon.

• OTP-S185 - helps to connect to Internet

  Good evening

  I bought a reader Blu - Ray BDP-S185 and fight so he can connect to the internet.  I have the drive connected to a LAN cable to my laptop to Apple (OS x 10.6.8) which shares its WiFi Ethernet connection (I know it works as I have an XBOX that gets its internet connection from the computer apple laptop when necessary!).  I have the following settings on my laptop:

  -Ethernet IP 10.0.0.1 address.

  The IP address of my router is 192.168.1.1

  On the Blu - Ray player I've tried Auto connect, but failed.  I then manually enter the following settings:

  IP address: 10.0.0.2

  Subnet mask: 255.0.0.0 (note this is also detected by my laptop IP Ethernet subnet mask)

  Default gateway: 10.0.0.1

  Primary DNS: 192.168.1.1

  Secondary DNS: 192.168.2.1

  I did put the Proxy Server for the Blu - Ray player option.

  Now on the BDP S185, when I go to "Network Diagnostics" I said "network connections are correct."

  In addition, the State of the network on the Blu Ray says physical connection: OK, Internet access: OK

  When I go to all services 'Internet Video' in the menu of Blu Ray players, I am presented with an end-user license agreement (previously, before that my 'Internet access' was 'OK' I have nothing, so I guess it's actually picking up the Internet).

  When I click on "I accept and next" I get a 'Status of Conection content Internet' box that says "connection to the Internet video service... (1/3) "after a certain time (with a line with a blue pulse goes fell on it), I get a new message box indicating ' connection status cannot be confirmed."  A network error has occurred.  You want to set Internet settings? "If I click on Yes, then I get caught for the installation of the network which says everything is fine."

  For more information, when I go to the "System information" page, I have the version of the software M09. R.0042 (which seems to be the most recent version).  I have a LINK connection status: succeeded but a commissioning server connection status: failed.

  Please can someone help me solve this problem! I would like to be able to use the features announced for my Blu Ray player otherwise I may as well have wasted my money!  The manual is pretty useless to help me to Setup/diagnose the problem!

  robert_a_hudson,

  Thanks for the detailed explanation about the issue. It seems to be a small connection problem. I suggest that you perform the manual of installation of the Internet once again, by changing the last number in the sequence of four digits of the IP address.

  NOTE: Restart the player and the router before continuing.

   

  Change the last number to a higher number than the original but less than 254. For example, if the IP address on your computer is 192.168.0.5, enter 192.168.0.105

  If this is not enough, try to directly connect the LAN cable to the LAN of the drive port.

  If the problem persists, do factory reset in the player:

  Menu press HOME > Setup (suit case icon) > reset > all settings > OK

   

  If my post answered your question, please mark it as "acceptable Solution".