Running and the development of a remote server

Similar Questions

• Getting error: cannot run on the development web server configured

  I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

  Hello

  It is not a community forum for VS.

  Try the Visual Studio Forums

  Visual Studio development category:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Everything on my XP request too what program to run and the absolotly nothing works

  Everything on my windows XP application too what program to run and the absolotly nothing works has a virus and removed and that's how he left me nothing works virus disappeared, but all that happens when I try to open anything is what program I select the program, it must be running and then it asks which program to run again with this thing I just want to reset or repair but I can not even Get factory reset to work cause the recovery disks don't download help me please?

  more old XP and tried to use just the hidden reset the score at the factory, but apparently its not still installed, it's a nightmare, nothing works at all the

  Example: I try to open itunes shortcut fail... what program you want to run this with... Browse, go to itunes, click on the main iTunes or any other program folder so she asks what program you want to run this with and so on and so fourth and it does with absolutely all programs on my computer

  Example 2:i tries to go to the control panel to use anything, and almost all alone there is an error no internet Explorer doesint work go if I'm going in, it just stops, but I can't go to google... and all that fun stuff

  no idea on how to solve this problem would be insanely useful thanks

  Windows XP file Association problems
  http://www.dougknox.com/XP/file_assoc.htm
  EXE file Association problem (association of default restore for EXE files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  HTM/HTML Associations (Restore the default associations for htm/html files) and/or
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Difficulty of file Association (restore the default associations for BAT files)
  CAB File Association problem (restore the default associations for CAB files)
  CPL file Association problem (restore the default associations for CPL files)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Directory Extension difficulty (restores default HKCR\Directory)
  EML file Association problem (default restorations for the EML files)
  EXE file Association problem (association of default restore for EXE files)
  File Association problem (restore the default associations for file folders)
  HLP file Association problem (default restore for HLP files associations)
  HTM/HTML Associations (Restore the default associations for htm/html files)
  ICO file Association problem (restore the default association for ico files)
  INF file Association problem (restore the default binding for the INF files)
  Internet Explorer Desktop Icon problems (restore the default behavior for the desktop IE icon)
  Difficulty of Association JPE/JPG/JPEG (restore the default associations for jpe/jpg/jpeg files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  MPG/MPEG File Association problem (restores default associations for MPG/MPEG files)
  MSC file Association problem (default restore for MSC files associations)
  MSI File Association problem (default restore for MSI files associations)
  MSP File Association problem (default restore for MSP files associations)
  REG file Association problem (default restore for REG files associations)
  SCF file Association difficulty (default restore for SCF files associations)
  RCS File Association problem (default restore for SCR files associations)
  TXT file Association problem (default restore for files TXT associations)
  TIF/TIFF File Association problem (restores default associations for TIF/TIFF files)
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  VBS file Association problem (restores default associations for VBS files)
  ZIP file Association problem (restores default associations for ZIP - file REG folders)

• Hi, why my color is not the same between the library and the development.

  Hi, why my color is not the same between the library and the development. The color is yellow in the library... I'm not problem before windows 10...

  thx for your answer...

  The upgrade of Windows 10 has probably replaced you previous monitor with an incompatible profile mode. Calibrate your monitor or assign the previous monitor profile to your screen

  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

• Individual images WVC80N FTP on an interval defined by the user to a remote server does

  Hello

  I'm shopping for a wireless webcam to provide periodic fixed images that are accessible via any web browser. I'm not interested in live streaming video, or what I must have remote users to directly access the camera.

  I currently own a Panasonic BL-C131A that performs the necessary function well. I set it up to send a simple jpeg image to a remote server every 60 seconds (assigning the same file name each time). My web site (http://www.creston-community.com/Public/Webcam.html) has a page that displays the uploaded image, i.e. the .jpg file, in the same interval. Of course, whenever the web page pulls the top of the file, it contains a more recent image this file contained on the previous cycle.

  I need a second camera, but Panasonic is expensive. I seems that maybe the WVC80N could be an alternative to a price much lower. However, I have reviewed the user for the WVC80N guide and the only mention of ftp of it lies in the section dealing with motion detection. Can someone tell me if the camera can do what I ask, independent of any movement detection settings? If Yes, can I specify jpeg as the file type, set a preferred file name that will be assigned to each image and set the frequency (interval) between ftp downloads?

  Thanks for any information anyone can provide. !

  The WVC80n doesn't have the specific feature you are looking for, not exactly.

  However, it can achieve the desired result in a different way.

  The willing WVC80n of a CGI interface that your web server could pull left to draw the image, instead of the camera by pressing the image.

  In other words, you can set a timer for one minute on the web server to retrieve a single image of the WVC80n jpeg and save it like that.

  http://usernameassword@wvc80n-deviceort/img/snapshot.cgi?size=3&quality=1

  The URL above may also be directly mandated by your web server.

• Former running and the new table in the same group?

  We have a ps4000 (sata, 16x1tb), which is short for maintenance in may without possibility of renewal.

  The ps4000 is a target for the replication of windows/hyper-v a ps6100x volumes and runs some volumes of hyper-v with virtual developer/test machines.

  We bought a new ps4210x to replace the old. Must be run on 1gbit for at least the next year.

  The best way to move data is to update the firmware on the ps4000 to even x 4210 a and then join the x 4210 to the ps4000 group?

  Is there a checklist of exactly what to do to move the data from one to the other?

  We do not know what to do with the old system. We think to buy one or two replacement disks ahead of time and use it for some time yet. Use it as a replication target and some virtual machines hosting not important.

  Suggest two systems running in the same group?

  Should we use two pools for the placement of volume or just leave the firmware balance data? Both systems have raid6.

  What is supported, if we run the two systems in the same group? We always have software support for the whole group or Dell would say a member has no more support, and we cannot help you at all?

  If I understand the firmware release notes, the 7.x will be the last major version for ps5xxx. Our 2010 ps4000 will have more time with the firmware updates?

  Hello

  You can not have supported and no load/EOL paintings in the same group.   Or you want to use it for replication.  Because if you had a problem, support is limited in what they can do with this HW unsupported.

  Re: migration of the PS4000.  I suggest that you create a new pool put the 4210 in this pool.  Create the RAIDset and ensure that both interfaces are active.   Then move the PS4210 to the same pool as the PS4000.   This will cause space to be redistributed into the new array.     If you want to minimize any impact of performance possible, wait until the space is rebalanced.   Then move the PS4000 to the temp pool.   This will leave all the data on the PS4210.   Once it is in the temporary pool, you can use the option "Delete" to delete the group.

  There will be future updates to the PS4000.

  Kind regards

• Files put in the wrong place on remote server

  I use Dreamweaver CS4 and recently my hard drive didn't so I'll have to rebuild everything. I have almost everything works again after reinstallation of DS4 and reconfigure the settings but when I do the updates of my html in my local folder files, then 'put' on the remote server, do they not appear because they put them in a different location while they are supposed to. More specifically, on my local folder, I have a folder called "default_files" where I keep all my files and images (wait for the index file). On the remote folder, there is a 'default_files' file and a folder root. The root folder is where all my latest files are located this show up online, but I can't update those files updated "put" make their appearance in the folder "default_files". So, how do Dreamweaver put the files to update my local folder on the server in the correct location? Note that I have not changed anything on the server or local folder, but since then put in a new hard drive and reinstall the software, there is a setting somewhere that is not correct. I used this software for 3 years and more without any problem.

  Any help would be appreciated.

  Why should you even the "default_files" folder in your local site?  You can move everything to the root level?

  Nancy O.

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• . Alias files work with vi running in the development environment?

  If I have a vi that uses the NSV or front binding to NSV by using the project library names will be they resolved since a .alias file run from the OF?

  NEITHER Documentation mentions how it works for the casting of the exe.

  OK now I can answer my own question... Yes they do.  The alias file is located adjancent to the project file and inherits the name of the project.

  Everything works as expected.

• Remove MS Office 2010 Click-to-Run and the Q: drive

  I have a HP G72 which was preloaded with MS Ofiice 2010 Click-to-Run in the virtual drive; Q.: How delete/delete both?

  Using programs and features in Control Panel to uninstall the Microsoft Office 2010 software, also to uninstall "Microsoft Application Virtualization Desktop Client", it must remove the drive from Q.

  Restart the PC when done to remove them.

  .

• When I go to the field in 2008 r2 error ID and the incorrect password for remote

  When I take my 2008 domain to distance his username from the list and the password is password and username incorrect but even work in direct server.

  People Server lying around in the TechNet forums, you might better wander
  there and post this question for a better response.

  http://social.technet.Microsoft.com/forums/en-us/categories

• Says Vista system AG Searchhook class is running and the original internet is slow

  my computer says I have class searchhook ag running and slowing down my internet what? and how can I get rid of it please any help.

  * original title - this IS THAT AG SEARCHHOOK CLASS *.

  Hello

  I suggest you follow the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/AGSearchHook-class-is-running-in-Internet-Explorer/62326ece-1dfa-4B8F-B7F9-b3bb679e607c

  Concerning

• Problem with the background and the development

  Hi people!

  I have a little problem with my request, in this application, I have a background (bitmap) and 6 icons (bitmap) focusable.

  OK all going well but the problem is when I move the focus and the first and the last icon gets a white Home > _

  I don't know how to explain it better, but is simple, for example im on the first icon from the left and move to the left, another time and this Dungeon icon the focus but the focus changes to white, on the last icon is the same movement as the focus to the right (the last icon is on the right) and the focus change again in white... , where to move the focus icon back to normal.

  Usually, the icons have image development, I added this to the bitmapfield and eliminated the blue accent.

  protected void (_g, Boolean _on Graphics) drawFocus {//do nothing}

  Hello

  Replace your inside your BitmapField drawFocus() method (free and Ocupado) as below:

  protected void drawFocus(Graphics _g, boolean _on)
  {
       paint(_g);
       invalidate();
  }
  

  Concerning

  Bika