Says Vista system AG Searchhook class is running and the original internet is slow

Similar Questions

• Windows XP will not run and the PC is very slow.

  None of my restore points work.  I don't know what to do and I installed Microsoft Security that says that everything is fine.

  Than ks for your help.
  Evil Shute in NH

  Hi a malfunction.

  Please repost your question here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system?page=1&tab=all&tm=1300700638376.  Please indicate why you need to do a restore of the system in the first place - which is the real problem you're trying to solve?

  Good luck!

• Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a!

  Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a! I have Linux Fedora 15 and I'm not the root. I spoke to the Manager and he said I should delete a file in the folder where firefox is installed and which can solve the problem. Can you help me?

  Thanks, Marius
  

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

  All;

  I missed upwards at the start of my new laptop... I fail to use Vista.
  So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

  How can I get the original installation of this machine...?

  Any help is welcome...

  Kind regards...

  Hello

  Try with https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Everything on my XP request too what program to run and the absolotly nothing works

  Everything on my windows XP application too what program to run and the absolotly nothing works has a virus and removed and that's how he left me nothing works virus disappeared, but all that happens when I try to open anything is what program I select the program, it must be running and then it asks which program to run again with this thing I just want to reset or repair but I can not even Get factory reset to work cause the recovery disks don't download help me please?

  more old XP and tried to use just the hidden reset the score at the factory, but apparently its not still installed, it's a nightmare, nothing works at all the

  Example: I try to open itunes shortcut fail... what program you want to run this with... Browse, go to itunes, click on the main iTunes or any other program folder so she asks what program you want to run this with and so on and so fourth and it does with absolutely all programs on my computer

  Example 2:i tries to go to the control panel to use anything, and almost all alone there is an error no internet Explorer doesint work go if I'm going in, it just stops, but I can't go to google... and all that fun stuff

  no idea on how to solve this problem would be insanely useful thanks

  Windows XP file Association problems
  http://www.dougknox.com/XP/file_assoc.htm
  EXE file Association problem (association of default restore for EXE files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  HTM/HTML Associations (Restore the default associations for htm/html files) and/or
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Difficulty of file Association (restore the default associations for BAT files)
  CAB File Association problem (restore the default associations for CAB files)
  CPL file Association problem (restore the default associations for CPL files)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Directory Extension difficulty (restores default HKCR\Directory)
  EML file Association problem (default restorations for the EML files)
  EXE file Association problem (association of default restore for EXE files)
  File Association problem (restore the default associations for file folders)
  HLP file Association problem (default restore for HLP files associations)
  HTM/HTML Associations (Restore the default associations for htm/html files)
  ICO file Association problem (restore the default association for ico files)
  INF file Association problem (restore the default binding for the INF files)
  Internet Explorer Desktop Icon problems (restore the default behavior for the desktop IE icon)
  Difficulty of Association JPE/JPG/JPEG (restore the default associations for jpe/jpg/jpeg files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  MPG/MPEG File Association problem (restores default associations for MPG/MPEG files)
  MSC file Association problem (default restore for MSC files associations)
  MSI File Association problem (default restore for MSI files associations)
  MSP File Association problem (default restore for MSP files associations)
  REG file Association problem (default restore for REG files associations)
  SCF file Association difficulty (default restore for SCF files associations)
  RCS File Association problem (default restore for SCR files associations)
  TXT file Association problem (default restore for files TXT associations)
  TIF/TIFF File Association problem (restores default associations for TIF/TIFF files)
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  VBS file Association problem (restores default associations for VBS files)
  ZIP file Association problem (restores default associations for ZIP - file REG folders)

• What should I do if I lost my vista CD when I want to restore to the original image?

  What should I do if I lost my vista CD when I want to restore to the original image?

  Hello

  Vista came preistalled please contact your computer manufacturer, and then request to send you replacement discs.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

  PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

• I had to do a clean install on my pc under XP sp2 and install windows 7. I saved my CS4 extended files but it wont let me install from files, it is said to run from the original disk which I can't find. My product key is on my Adobe account

  has had to do a clean install on my pc under XP sp2 and install windows 7. I saved my photoshop CS4 extended files but it wont let me install from files, it is said to run from the original disk which I can't find. My product key is on my Adobe account. Can I make a download for my product on the Adobe Web site, which is not a trial? It all started with the upgrade of my other pc for windows 10... long story. I have the disks Creative suites 5 and 5.5 but this pc is only 32 bits, and the only one that works with my Epson Stylus pro 4800. Help please

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• 53 updates to Windows Vista and now screen keeps saying that it configures updates, then it restarts and the wont do anything else

  After using no not my laptop for some time, I turned on and 53 updates to Windows Vista. Went through the whole process, then got to the updates configuration screen and the laptop keeps restarting and it won't do anything else.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ___________________________________________________________________

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Former running and the new table in the same group?

  We have a ps4000 (sata, 16x1tb), which is short for maintenance in may without possibility of renewal.

  The ps4000 is a target for the replication of windows/hyper-v a ps6100x volumes and runs some volumes of hyper-v with virtual developer/test machines.

  We bought a new ps4210x to replace the old. Must be run on 1gbit for at least the next year.

  The best way to move data is to update the firmware on the ps4000 to even x 4210 a and then join the x 4210 to the ps4000 group?

  Is there a checklist of exactly what to do to move the data from one to the other?

  We do not know what to do with the old system. We think to buy one or two replacement disks ahead of time and use it for some time yet. Use it as a replication target and some virtual machines hosting not important.

  Suggest two systems running in the same group?

  Should we use two pools for the placement of volume or just leave the firmware balance data? Both systems have raid6.

  What is supported, if we run the two systems in the same group? We always have software support for the whole group or Dell would say a member has no more support, and we cannot help you at all?

  If I understand the firmware release notes, the 7.x will be the last major version for ps5xxx. Our 2010 ps4000 will have more time with the firmware updates?

  Hello

  You can not have supported and no load/EOL paintings in the same group.   Or you want to use it for replication.  Because if you had a problem, support is limited in what they can do with this HW unsupported.

  Re: migration of the PS4000.  I suggest that you create a new pool put the 4210 in this pool.  Create the RAIDset and ensure that both interfaces are active.   Then move the PS4210 to the same pool as the PS4000.   This will cause space to be redistributed into the new array.     If you want to minimize any impact of performance possible, wait until the space is rebalanced.   Then move the PS4000 to the temp pool.   This will leave all the data on the PS4210.   Once it is in the temporary pool, you can use the option "Delete" to delete the group.

  There will be future updates to the PS4000.

  Kind regards

• Vista could not start in normal mode and the relocation of scores of hidden factory settings also failed.

  NOTE: THE PROBLEM WAS MY POWER SUPPLY WAS LOW, NEW POWER ADAPT SOLVED MY PROBLEM.   Read more if you are interested in what happened prior to my tent a different power adapter.

  Original title: vista 32 does not start

  After a reboot could enter the mode safe mode with internet connection.  able to restore good boot known beforehand.  But what normal start attempt would not start completely.  tried to reinstall from hidden factory partition.  07:34 minutes, the installation progessed.  then the machine stop.  When you restart get the message "error during installation, restart the computer, and then restart the installation."  When you try to start in safe mode, get error ' cannot install frrom SafeMode ".". "  I have no bootable cd.  to know about a 'platform of recovery' still tells CD also cannot install from this cd.   can I boot from a "devils of recovery" in safe mode and use the hidden partition to reinstall to factory settings as I tried the first time?  or do I need a full installation CD to get the machine to boot?   My question is should I at this stage of start-up during installation seems to have failed?

  as for what caused this problem?  I recently gave a USB external hard drive, but had not written for her.  did a chkdsk of the external hard disk without error.   When the problem was first happening, I removed the battery and the power cord of the acer laptop then pressed the power for 30 seconds to perform all memory the power button.  He got rid of a problem that I had been meet in which received start-up error message not "adapter acer". with battery removed, laptop power problems have disappeared.

  as the system is now, when I try to start everything now alt F10, I get a screen that reads "change windows startup options for: microsoft windows vista ' ' path: \windows\system32\winload.exe" "partition: 2" "HDD;". " d404533e' "[/ noexecute = optin /deteecthal]"

  When I press ESC the next screen "windows boot manager" bed "choose an operating system to stat, or press TAB to select a tool:

  Microsoft windows Vista (single choice)

  "to specify an option fo this choice, press F8."

  "Tools:

  "windows memory diagnostic"

  (diagnosis of memory showed no problem) by pressing TAB toggles between Vista and the diagnosis.

  I tried to boot with external USB hard drive connected and not connected.   the touch pointer was not working, but was erratic.   Sometimes, I could use a USB wireless mouse when it is started in safe mode.   recently the media player would not charge unless I restarted.  (before the system does not at all which is the theme of this original problem).

  When I try to start using f10, I get a screen that seems to ask for entry. the cursor is held after the detecthal of the line as below. What could of entry to enter the boot to continue?

  Winload.exe

  / noexecute = optin /detecthal

  me. surprised... the problem was that my power supply was low.   the adapter provided enough power for the laptop, most of the time.  but sometimes for laptop needs more power that the adapter could supply... so the laptop would be closed.   When I tried a different power adapter in a store, the fully charged laptop and my problem was solved.  lost a lot of time because I didn't know that the power supply was the problem!

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• Remove MS Office 2010 Click-to-Run and the Q: drive

  I have a HP G72 which was preloaded with MS Ofiice 2010 Click-to-Run in the virtual drive; Q.: How delete/delete both?

  Using programs and features in Control Panel to uninstall the Microsoft Office 2010 software, also to uninstall "Microsoft Application Virtualization Desktop Client", it must remove the drive from Q.

  Restart the PC when done to remove them.

  .

• installation of a new operating system (windows 7 x 64 ultimate) and the formatting of the hard drive

  computer laptop hp - pavilion dv6-7070se entertainment

  -windows 7 ultimate x 64

  I want to format the hard drive... .and I was wondering if I can both HP_TOOLS & recovery format safely

  and please tell me if I can not and why...

  for your information: I deleted the windows comes with my laptop and installed windows 8

  Please help me as soom as possible...

  Thank you...

  Hello

  In this case, you can delete the partitions - as you have already removed the original operating system, you would not be able to create a set of recovery discs from the recovery Partition that you have lost the application Recovery Manager required to create, but you can always order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you ever need it, the HP_TOOLS partition can be re-created by downloading and installing the software on the link below.

  HP of UEFI environment.

  Kind regards

  DP - K

• Running and the development of a remote server

  Hello

  I bought and installed a PHP/MYSQL application to run on a hosting server share. Now I want it for my needs. Betai I created a local copy of the app on my desktop... I can only develop or test the software on the remote server. So I configured Dreamweaver tests and remote sites to point to the shared hosting server. The problem I have is that if I tried to run the Web site index.php page in Dreamweaver live browser, it connects to the remote test application... but it does not deal with the same configuration as when I run it directly in Internet Explorer. How can I configure the work environment to fully integrate the experience of server?

  Thank you
  King

  As david has said, no, you can't do it this way, but there are other tracks, you can take and still achieve your development goals.  I had to develop Web sites asp remote years (when I was still made) because I'm on a mac and still do it sometimes for clients who want working models in php/mysql with my own dedicated web server, I in a data center and can connect to remote files and connections database for server very good behaviors for the job.  Simply have a configuration of temporary sub domain or ip address where you can publish the book for test purposes, rather than use live view features in dreamweaver.  Frankly, I'd rather see my work in the actual application in software. I hope this helped a little.