Runtime Labview 8 coexisting with Labview 7

Similar Questions

• Runtime LabVIEW 2013

  I want to start a .exe file, written with LV 2013 SP1 on a windows 7 64-bit PC.  I downloaded and installed the Labview 2013 SP1 runtime.  When I try to run the .exe, a message box appears indicating that I need to install runtime Labview 2013!

  I tried to "Reinstall" to verify that it has been installed and I was unable to install the software becaue what is already installed.  I don't know where to go from here...  Help please!

  Are you sure THAT you have installed the 64-bit version of LabVIEW and created the .exe from that?  I ask because the vast majority of people use LabVIEW 32-bit even on Windows 64-bit OS.

  My theory is that you have 32-bit LabVIEW.  You have created an .exe with which would be also 32-bit.  Then download the 64-bit version of engine performance by mistake because you have the 64 bit version of Windows.  In this case your .exe 32 bits will complain of not installing a run-time engine.

• Runtime LabVIEW Developer Suite DVD

  Hello!

  I need to install runtime Labview on a PC.

  Where can I find it on my DVD of Developer Suite?

  (I would like to avoid downloading LV RTE Web site NOR)

  Thanks in advance for any help,

  Marco

  I'm sure it's for MS-DOS device drivers.

• Install runtime LabVIEW CVI?

  Hello

  who runs the Update Service NOR suggest to download a patch of 226 MB for runtime LabVIEW 2012... (everything I installed knowingly was CVI2012)

  --> How can I check if the computer has this engine installed, which is the name of the file to look for (and it takes the CVI)?

  Thank you!

  Wolfgang,

  The LabVIEW run-time engine is not necessary for any CVI program to run, but it's an addiction of some of the tools ADE, such as the Finder of the example and the Manager of distributed system (used to configure network variables).

  Luis

• E4200 and Wireless N and coexist with Wireless G

  Looking for suggestions for wireless G coexist with Wireless N on e4200.

  I have a wireless G Router for VERIZON FIOS ActionTec network.  I just added the E4200 router wireless n.  I have the latest firmware, 1.0.03.  Hardware version 1.

  We get a few laptops for vacation and would like these to be able to use Wireless-N.  I liked phone/itouch/roku device using the ActionTec router Wireless G/B.  I would keep the router ActionTec Wireless-G/b, so that 2.4 and 5.0 ghz Wireless N only.

  I have two routers configured so that ActionTec is primary with DHCP and the e4200 is secondary, the installer mode bridge, with DHCP off and static ip 192.168.1.2.   This used as an indication-> http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506

  I have a SID for the ActionTec Wireless G network and it is set to channel 1

  I have a different SID for e4200 N wireless network, even for 2.4 and 5.0 and I left the defaults on the other wireless settings.

  Are there any other suggestions for the settings for these routers/networks coexist?

  can't test the settings wireless n for another week.  and display the results.

  Update

  so for the ActionTec FIOS router main making wireless G and e4200 as secondary in bridge making Wireless N mode seems to work...

  so after a few changes that I currently use

  -on Actiontec, main router, the value G WIRELESS channel 1 and SID-> g

  -on e4200, secondary router, in bridged mode, value 2.4 GHZ WITHOUT WIRELESS N only, and channel 11 and 20 MHZ and SID-> WIRELESSN

  -on e4200, secondary router, in bridged mode, value 5 GHz WIRELESS N only and autodetect AND SID-> WIRLESSN5GHZ

  If all networks have different SIDS, do not roaming.

  -seems new hp windows 7 laptop computers work FINE with 2.4 GHZ Wireless N, variety and very fast, but do not yet work with 5 GHz (bought on Black Friday 2011)

  -seens old windows computer hp laptop xp works with 2.5 GHZ Wireless G, but doesn't seem to work properly with either 2.4 GHZ Wireless N or 5 GHZ Wireless-N

  -seems new hp windows 7 everything in working GRAND with 2.4 GHZ Wireless N, variety and very fast

  -seems to work bridge WES610N with 5 GHZ Wireless-N, even if only 48% signal, my Roku device works fine on the bridge, and connected laptop appears 20 000 low 4000 on FIOS

  so I think that the wireless card of the customer in the old hp laptop was screwing the rest of the Wireless N network and not several devices still use 5 GHz.

• Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  Hi all

  I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

  The version of the Weblogic Server is 10.3.6

  The version of RMS App is 13.2.6

  While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

  Checking for conflicts...

  No conflict detected

  Removal of the Patch ID: EJUW...

  Result: success

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

  Encountered unrecognized patch ID: ZLNA

  Any suggestions how to solve and apply the fix successfully Jan would be useful.

  Thank you.

  Hello

  Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

  To designate a directory to download the hotfix, follow these steps:

  Start the smart update.

  On the Smart Update main window, choose file > Preferences.

  The Preferences dialog box appears.

  In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

  https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

  Thank you

  Aishwarya

• ESXi (or ESX) coexist with other OS?

  My PC server to windows 2008 installed right now.

  And I want to try ESXi (or ESX), but I still want to use windows 2008 some time (no virtual machine).

  ESXi (or ESX) coexist with other OS? like GRUB can linux redhat bootloader?

  Moreover, what is better, ESXi or ESX?

  xhawk2010 wrote:

  My PC server to windows 2008 installed right now.

  And I want to try ESXi (or ESX), but I still want to use windows 2008 some time (no virtual machine).

  No, ESX (i) is a bare metal hypervisor. It cannot coexist with another operating system on the same hardware.

  ESXi (or ESX) coexist with other OS? like GRUB can linux redhat bootloader?

  Maybe it's possible. I guess this is something that must understand the bootloader.

  Moreover, what is better, ESXi or ESX?

  IMHO, that's the wrong question. In general, both have the same kernel, so they offer pretty much the same. But ESX (i) is not a console and the free version can also not be integrated in vCenter without having to purchase the appropriate license.

  But on the subject of virtualization, performance and trust, they are the same.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Distribute the application without runtime labview

  I read a lot of post by saying if the target machine has the same runtime engine installed, I need not distribute the application with the labview runtime engine. Somehow this rules does not work for me. I have a labview development system installed PC 2010 and has the 2011 SP1 runtime. I also download the same version of the engine running and installed on a target computer. When I distribute my labview application, if I choose to include the runtime to build properties, the application will be able to install and run properly in the machine target. If I don't get the runtime, so I would not be able to run the application.

  Anyone help me on this? I don't want to compile the application with the runtime engine as it is big enough

  
  

• Runtime LabVIEW 8.2.1 - Windows XP 32-bit

  Hello

  What version of LABView runtime should I donload to work on 32-bit?

  There is only 64-bit...

  Hi Kobi,

  Runtimes are not compatible, you need the same version that you have developed the VI in.

• Why my LabVIEW 2010 program asked for the runtime LabVIEW 8.5.1 whenever it is launched after installation?

  It is a simple timer program that displays the elapsed time (see photos). I can't think of one thing that should be the cause... It started happening right after that I selected items of the scale with façade resizes and recompiled and re-installed the app. This was not the case before that when it is installed without the resize selection, but then I removed the selection and it still happens. Any ideas would be appreciated.

  
  

• The runtime LabVIEW 2013 silent installation

  Hello

  I would like to install the LV 2013 runtime silently. I tried to use the /qb cmd option to install in silent mode (setup.exe/qb), but I get the error "invalid command line parameters. However, if I use setup.exe/r (remove the final reboot) it works. I checked that the /qb option is specified in the help.

  Please try:

  installation/QB /AcceptLicenses Yes

  More information on the installation in silent mode can be found at http://digital.ni.com/public.nsf/allkb/878FC4C374013ADF8625733D00688F67?OpenDocument

  Kind regards

  Andrej Korosec

• I get a runtime error spoolsv.exe with bluescreen evert time windows starts up and keep poping up.

  I get a runtime error with a blue screen Microsoft end spoolsv.exe ++ Runtime library he closed in an unusual way. When I start in safe mode I do not get the message.

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ================================================================

  If issues require more troubleshooting.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• How can I fix Runtime error R6034 associated with ITunes in Windows 7 than?

  How can original title - I fix Runtime error R6034 in Windows 7?
  I use Windows 7 Home Premium 64 - bit OS.

  I've never had this problem before... today, I opened iTunes and it prompted me to download the new version.  I use iTunes all the time and have updated several times without any problems.  During installation, it gave me an error message that says:

  Runtime error!

  Program C:\Program Files\iTunes.exe

  R0634

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.
  I leave the facility, uninstalled iTunes and rebooted my computer.  Now, I get a similar message with a slight difference:
  Runtime error!

  Program C:\Program Files (x 86)...

  R0634

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.
  I don't let anything go to the error message.  It does not point to a specific file, it ends only with "(x86)..." "Whenever I start my computer, this error message appears on my desktop.
  How can I fix this problem?  I found several solutions but am not sure which one is the best, and I don't want to try a bunch of different things for fear that I can make the problem worse.  I would try and it staring at me, if possible, but I need to know if this is really possible or if I have to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!

  I checked this page https://discussions.apple.com/message/24611030#24611030 and it cleared up the problem, although I have not tried to reinstall iTunes - it installed on my desktop without a hitch and synchronize the iPad to that instead.  But it was very satisfying, removing every piece of software my laptop Apple.

• InDesign CS6 can coexist with CS5.5 Production Premium?

  I have a user with Adobe Production Premium CS5.5 installed.  They want to buy InDesign CS6.  ID CS6 will install and work properly if there is Adobe CS5.5 applications?

  
  Bob Reed

  AARP

  They can coexist quite well.

  Bob

• print or export created runtime of vector graphics with the intact alpha values

  I want to be able to save state generated dynamically to a SWF as a vector image. I know that I can right click on the swf file and print to PDF using the Adobe pdf printer driver. It works well, but all the alpha values are lost. Anyone know how to print a pdf or other vector format file and retain the alpha values? Pdf format it supports clearly I can save objects with alpha in Illustrator to PDF without problem values.

  Any alternative that archives this result would be welcome for example save runtime swf via actionscript in swf format or format Illustrator etc.

  Thank you

  Hi all

  Flash Pro CC 2014 (v14.0.0.110) is now available for download via the Web App Cloud and Adobe Creative site.

  We have added the function Export SVG to Flash Pro with this new version. You will now be able to export the contents of the vector of the image selected as an SVG image, which can be opened directly in a browser and even imported into Adobe Illustrator.

  Option to Export SVG are accessed through the parameters of publication as well as via the Menu file > export > export Image option.

  Alongside this, we have added several new features in this release. The complete list is available on these links:

  Overview: https://www.adobe.com/in/products/flash.html

  Whats new: https://helpx.Adobe.com/Flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Thank you

  Mabrouk