S5200-903: possible start of the USB via?

Similar Questions

• Is it possible to access the USB ports and a slot for card SDX?

  Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?

  Rotate the iMac autour to see ports.

• Satellite, L9W Click-Mini-B does not start from the USB flash key

  I have a mini click L9W - B.

  * What I'm trying to boot from a bootable USB key.

  I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
  All USB keys to start correctly on my computer desktop and even with my other laptop.

  * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
  I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

  If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
  If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
  who can help?

  I hope that there are German support. -Hopefully, there are German-language support.
  If this isn't the case, please contact me.

  Message has been translated

  I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

  Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
  Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

  by the way: it's English language community

• Satellite A10 - want to start using the USB

  I have a faithful A10 pro, paralyzed by a skinny concert 17 HARD drive. The DVD - rom drive just failed. I replaced it, that one isn't working. I seem to have a problem with my motherboard (so the tech Guys tell me). Maybe someone out there knows better.

  I have an external (USB) DVD-rom and floppy, that work well, but I'm unable to boot either. It worries me because I need to reinstall windows. I also want to replace the HARD disk drive.

  I can (so the BIOS tells me) boot from LAN. I have a home network (desktop runs vista Home premium), but do not know how to start the drivers for the USB drives on a local network.

  Maybe there is an easier way to boot from a USB device. Can someone help me please?

  Warren Lodge

  I can confirm the info given by Johnny.
  Boot from the external USB CD/DVD drive is not possible!

  You can use only HDD, LAN, ODD USB FDD (floppy) Gold

• Satellite C660-108 does not start if the USB Bluetooth dongle connected

  Hiya,

  I hope you could help me.

  I'm having a problem with my dongle bluetooth and satellite c660-108.
  It all works perfectly. It connects devices via bluetooth and I can do whatever I want.

  But then when I'm mobile stop and turn it on again it will go if the bluetooth dongle is always in the USB.

  I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  I have to turn it off, remove the bluetooth dongle and then turn it back on.
  And then windows starts. After that, I put in bluetooth dongle, once again I want to work with her.

  It isn't a huge problem, but it is a bit annoying when I have to leave the bluetooth and put it back again to get the windows began.
  I'm running under win 8.1 but he already had with 8 victory.

  Anyone any ideas?

  > I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  Especially the blinking cursor is displayed because the laptop can not find a boot device.

  It seems that the device cannot put on the HARD drive while the USB dongle is connected.
  I would recommend you check the boot order in the BIOS.

  Put the HARD drive in the first place and the USB boot last device.
  Save changes and check if it helps.

• Cannot access BIOS when OS disk encrypted w / Bitlocker, starting on the USB key is not unlock disc

  Hello

  I enabled Bitlocker on my Acer Aspire 5315. The system partition is encrypted and the data partition. My motherboard doesn't have a TPM chip, so I opted for the unlock with a USB key.

  When I start the PC or wake them from their hibernation, the splashboot (with the logo of Acer) BIOS screen does not display the information below on how to access the BIOS (press F2) or the boot menu (F12). And therefore I can't access those as I used to.

  BitLocker does not account for the USB key, then asks for the password to unlock the HARD drive. Then Windows starts very well.

  However, restart (by a Windows or after you have entered the wrong password Bitlocker too many times), the BIOS splash screen is normal (with how access BIOS and boot menu), I can access BIOS by pressing F2 AND succesfully Bitlocker unlocks the HARD drive with the USB flash drive without having to ask for the password.

  So, my question is how Bitlocker unlock the HARD disk automatically via the USB when the PC starts?

  Thank you for reading.

  Note: I posted this question on http://social.technet.microsoft.com/Forums/en-US/w8itprosecurity/threads they suggested that I ask the Acer support.

  Thank you also get answers in the TechNet forums.  I'm sorry that you were unable to get a more complete answer it.

  We suggest that you uninstall BitLocker and decrypt the drive to determine if this restores your ability to access the BIOS.

• Cannot start with the USB on my hp proliant microserver, why?

  Hello!

  I had a few problems to install esxi 5.5 on my hp proliant microserver... USB keyboard, but I solved that by plugging another keyboard, an old labtec keyboard.

  Seems esxi is not compatible with logitech g510... BUT I have another problem. My server does not start with my installation of esxi usb key longer. It was also like that before I changed the keyboard, so this isn't the issue. Server starts fine and then I get the message: "'remove the disc or the media, press any key to restart" "

  It worked fine a few days ago. The usb boot works OK on my Hp workstation...

  I have a windows server 2008R2, installed on the server, but the usb boot worked fine when this OS is installed... So nothing has really changed, he just stopped wanted for a startup with USB... I loaded the default bios setting... IM lost here please help!

  IV ' e OK installed esxi 5.5 via USB stick

  Follow this link to get the usb boot: http://www.tinkertry.com/rufus-takes-2-minutes-to-create-a-bootable-usb-flash-drive-for-esxi-installation/

  Don't know yet why this work, but I'll know!

• Is it possible to use the USB modem on the Toshiba AT100 Tablet?

  Hi all!

  I just bought a Toshiba Tablet and I was wondering if it is possible that the Tablet could use a usb modem. My USB modem lights to say its connected but can not find where he recorded as an option.

  Concerning

  Pictonite,
  Tablet of Noob.

  Hello

  > that the Tablet could use a usb modem

  Found this info on some Android Web pages:

  + Unfortunately, you can t taken modem 3G into the USB there aren't currently has no drivers available. Maybe later on the track Google will add support for the mobile dongle in its Tablet OS, but for now, you got to jump on WiFi or a mobile wireless access point to get the online AT100 +

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Mini 311 does not start if the usb device is connected

  Hey, I just bought a HP Mini 311 and everything has been great so far except for this issue.

  Whenever I try to start the Mini 311 with my receiver Logitech wireless mouse connected by USB, the netbook will just freeze on the HP Logo.  When I unplug the USB dongle, it starts very well.

  I hope that someone would know how to solve this problem?  I tried to find a way to fix it by the BIOS, but so far nothing's worked.  Thanks in advance!

  Hi guys I had problems of CAs with my mini was diging place difficult. The problem is in the BIOS. This is so a few "patches" for bios or smth. Eventualy steals my mini, no booot or other problems so far. IM using F04 BIOS is a bit.

  OK, is the link for more info: http://myhpmini.com/forum/viewtopic.php?f=62&t=2898

  Let me know if this helped.

• e9280t cannot start with the USB 3.0 card (tried several providers) new version of BIOS e9280t necessary

  Hello...

  I bought a new e9280t year last on the HP site complete with 9 GB of memory (now 16), Blu-ray/DVD writer & reader, tuner TV digital Hauppauge, ATI Radeon 4850 video card bi-ecrans, etc... Since then, I've added more memory and a Firewire 400/800 3 card. His running Win 7 Pro (sp1) and the BIOS is v5.29.

  I bought an external drive to USB 3.0 WD (3 TB) and a StarTech USB 3.0 card (Amazon.com). After installing a USB 3.0 card, the system would be powered on for a second then die and then do it again a few seconds later and the cycle continues until the power cord was pulled. Then, I pulled the USB 2.0 card and tried again only to have the same results. The only cards that remained in the system during the trial was the ATI card and the TV Hauppuage card.

  Thinking that the problem was with the USB 3.0 card, I bought another provider (Rocketfish of BestBuy) and installed. The same problem as with the other card USB 3.0, the system does not start.

  No software driver or other changes have been made to the system before installation tent (according to the vendor's installation instructions).

  Given that all failures occur during the power first sequence and cards have been tried with and without power tied to them, that the problem cannot be fixed with an upgrade of the BIOS for the motherboard of TRUCKEE. I could be wrong, but I'm going on 30 years of experience of material as my framework for this review.

  If anyone else has this same problem, it would be good to rally them around and see if HP notice us.

  Thank you

  Norm

  I upgraded my power supply 650w (thermal take) and it all works - USB 3 controller (Koutech Dual Channel SuperSpeed USB 3.0 PCI Express Card (2 x internal) model IO-PEU232) - he also has a SATA power connector, but it works very well with just a power bus.
  -also updates card reader (put it in the 2nd DVD Bay): internal Koutech IO-RCM630 Multi-in-1 USB 3.0 SuperSpeed Front Panel card reader with a USB 3.0 Port (3.5 ")

• [Solved] Possible to enroll the workstation via the command line (Linux)?

  Hi all:

  Under Linux Mint or Ubuntu, the ToolTip that should allow me to save the product key just won't display, making me unable to use the program. Normally, the system should ask me a root password after I click to enter, but nothing happens here, and I can't find a problem in any log file (by clicking on the option adds nothing in the newspaper at all). I try this on a new brand operating system installation and using the installer to update from the Web site.

  Is it possible that I could fix this, or as asking the question, save the product via the command line key instead?

  Thank you!

  Is it possible that I could fix this, or as asking the question, save the product via the command line key instead?

  In a Terminal, use the following command and use your real serial number instead of the fake one which is indicated.

  / usr/lib/VMware/bin/vmware-vmx-new-sn 1A2B3-C4D5E-6F7G8-H9I0J-1K2L3M

• Is it possible to use the USB device as an audio output on Satellite Pro?

  I have a satellite laptop computer pro that is used as the center of entertainment in my room before, i.e. ripped music is played through my stereo, it's my player to dvd etc..

  My problem is the following - the only link of notebook with stereo I know and am currently using is a 3.5 mm jack adaptor phono twins connected at the front of the laptop and then phono leads stereo auxiliary input adapter. It works pretty well but I noticed that when you listen to songs more calm music, there is a lot of background noise, almost as if the internal working of the laptop sounds are picked up through the headphone jack.

  Y at - it another way to make a portable hi-fi audio output via usb for example, thus obtaining a more pure sound. My hi-fi entry is phono of twins.

  I'd appreciate any help on this topic. Thank you

  Hello

  See this topic
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14645

  There are two useful links providing you a USB audio device to record sounds and to connect other audio devices.
  I put t know what laptop, you have exactly, but it should support a S/PDIF (same headphone jack) port.
  Here, you can connect the S/PDIF audio cable and can connect the HFI for notebook computer in digital mode.