Sam SP6000 - fan runs do not at all

Similar Questions

• HP h8-1141 fan runs at full speed all the time

  Processor and fun of rear cooling fan runs at full speed on Pavilion h8-1141

  Solution:

  I cleaned the inside of the computer and all the fans. It was very dusty.

  Then I pressed my finger on all the cards on the motherboard to make sure they don't lose. As for the fans, I took out and put them back in.

  Now it's working. The fans are back to normal.

• Question about OWA scripts - how much time do need to run or not at all

  Just a question about OWA on Exchange 2010 scripts. I have a site and unique Exchange Server. I noticed that we have a powershell script scheduled in the Task Scheduler running daily that defines all the mailbox OWA strategy. This policy is defined in the EMC access client/organizational Configuration (EMC) tab.

  My question is... If the policy is already configured in the access client/organizational Configuration tab, should this powershell script run at all?  Not all new users get this strategy by default (since we have only one policy OWA) If you enable Outlook Web access on the mailbox of the user in the appearance of the mailbox tab?  My thought is that the powershell script and the calendar was just a postponement of the old Exchange 2003 for strategies for the OWA...

  Thank you.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• laptop HP 2000 2202tu: fan runs is not on my computer hp laptop 2000 2202tu...

  Hello, my laptop computer fan was good until today morning and I stopped at noon, and everything was ok. But when he walks in the evening, it displays the error message - the system fan does not work and countdown from 15 seconds up to what the laptop gets auto shutdown. After that, I noticed that my fan is not spinning. As troubleshooting, I've updated my bios, do a system restore, uninstall paragon hard disk suite that I have installed the morning thinking it could be the cause of the problem. But of no use. Still the fan does not work. Can any body if you please help me in this regard that my laptop heats up a lot if I run it for 15 minutes. Grace.

  Hi @mkshrma

  I understand that your fan is not rotating, and this is a serious matter. Until it is resolved I would recommend that you do not use it, or if it is absolutely necessary, then use a cooling plate or something similar to the air force through it to help dissipate the heat.

  See the following document: reduction of heat inside the PC to avoid overheating

  In the cleaning process to look for something that can prevent the fan from spinning, debris, dust build up, or if the fan is just dead. You can use Service of 2000 HP and maintenance manual to help with the cleaning process and identify the relevant part number if it needs to be replaced. (see page 81 of 115 in the pdf)

  If the fan itself is dead, then you will need get a replacement or use a cooling plate.

  HP Notebook PC - HP certified spare parts order

  I hope this helps.

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Satellite M30X-129: CPU fan runs constantly after new XP Pro re - install

  I just installed a new Samsung 120 GB drive in my M30X-129, an upgrade of the 60 GB IBM drive with what it was originally provided.

  Tried ghost XP Home installation of the old drive to the new - but it didn't work for some reason, installation, attached to a page with the "Windows XP" logo on it...

  So, I installed XP Pro with SP2 from scratch on the new drive.

  After having done that, I then installed the Toshiba and utils drivers listed for your laptop:

  NES http://UK.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 555

  The problem I have is that the fan runs at full speed all the time - this isn't the case with the old installation of XP (was rare for it to come on at all when slowed down in the office - running full bore 100% of the time)

  Research by and try a few suggestions:

  -J' installed the common Utils from Toshiba
  -J' installed the Toshieba power management - and set the fan speed to ' Silent' has ', but that doesn't seem to have any effect.

  Any suggestions? for example. where I get the latest versions of the applications?

  The noise of the fan slowly leads me to the top of the wall...

  Ben.

  Hello Ben

  If you have installed your own OS and Toshiba designed drivers, tools and utilities, I assume that this problem cannot be software. I'm really not 100% sure why the fan always runs at full speed but Satellite M30X is around 2 years and I guess it's time to clean up. The second thing can be your new HARD drive.
  It is also possible that new HARD drive produce more heat and sensors to register it and don t stop the cooling fan.

  I recommend you to professionally cleaned the unit and remove any dust inside the unit. I'm pretty sure that cooling fan does not work at all times.

  Also try to put the laptop into a slightly higher position (if possible at the back) and on this brand more interspace between the bureau and the cooling grill fan in the lower corner of your laptop.

• Case fan runs at full speed

  I accidentally shorted the circuit case fan on my motherboard HP (explanation below), and now the fan runs at full speed all the time. Apart from the fact that it was a stupid thing to do, it will be a long term problem and should I try to reset the fan speed switch?

  (Long version) It's hot here these days and my computer fans seemed underpowered. I put a splitter at the exit of the case on the motherboard fan and added a second fan in addition to the original fan. All it worked well except the new fan seems to run pretty slow. I wanted to get a voltage reading card fan, but I accidentally hit the two sensors on my voltmeter and the computer shuts down immediately. He has started up and worked well, except that the throttle was no longer working and the fans were running at full speed. This also explains why the second fan turned slowly before when they were both being strangled.

  I guess that in the end I got my wish to have my fans running at full power, I just wanted to see if there are future problems leaving this way.

  Hello design_guy,

  You should not have problems with the fan rotating at high speed, with the exception that you can reduce the life cycle of the fan.

  You can install software on the computer that will allow you to adjust the speed of the fan to the computer which may help you extend the life of the fans and give you a bit of control over them.

  Something like SpeedFan should do the trick.

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• Compaq Presario CQ62 fan running full speed but not overheating

  Hello everyone, Ihad a fear a while ago and I was freaked out. I only am not much with the material so I came to you all.

  I had absolutely nothing on except a browser and youtube. There is no intensive program or anything running in the background when all of a sudden the fan running at full power. It was extremely noisy and scary since it's my first to deal with this. I had the computer for 4 years and I have never rough with her, but a week ago I had someone try to clean, but they have managed to take off the keyboard and that's all.

  I panicked and turned it off only to turn it back on, the problem is that I don't remember the error message I thought it was 90 b and he says that the fan was not working properly

  However this site says the fan was not working or he fell from the tree, which may be the case for them, but for me it worked as hard as possible.

  What should I do?

  I was going to borrow a Tablet, so I can use internet to disassemble and clean.

  However, from time to time I spray outside with the aircan and I have the laptop on stilts, so it is triggered on an angle. I put it down for the first time today to do this.

  ANY suggestions?

  TL; Dr

  Fan worked at maximum capacity

  I think I have an error which I think has identified as 90 b and he said that the fan is not working properly

  I use a Presario CQ62

  Before hand, he worked at the same max thought that the laptop was > warm just a little hot.  AND none of the intensive programs ran

  If they are all the same part I linked will work for you. It's the radiator and fan. You can buy just the fan and replace in your radiator but if all this is so cheap, why go to the extra trouble?

• e7240 CONSTANT NOISE OF FAN NOISY / FAN RUNNING ALL THE TIME

  We received 2 nine E7240s directly from Dell, one for me and one for my colleague. As soon as I turned it on to build for my colleague, I noticed that the machine was overheating and the fan made a noise. Dell offers an upgrade of the BIOS that has not changed anything. They then changed the radiator, even once, that does not change and since then, they have changed the motherboard. My colleague went on vacation, so I don't know if the problem has been resolved, however, my laptop day you do not overheat (also of course as it has done for my colleague) BUT THE FAN RUNS ALL THE TIME. So much so that I think that the person in the room upstairs is using his hairdryer. Dell has replaced the heatsink of heat and the motherboard yesterday, I did the same update of the BIOS and the problem is even worse. As soon as I turn the thing, the fan runs all the time making a big noise. My predecessor was the E6500 and I was not bothered by noises, he did.

  The 7240 made so much noise that I want to throw it out the window , seriously, I go back to my old 5 years e6500, which is now very slow, I can not just take constant hair dryer of the fan noise! I'm waiting for Dell back to me, but I don't see what else they can do.

  I suspect a problem of design with newer models, someone with a laptop computer Latitude 13 also mentioned it on the Forum, someone else with an e7240 also said "I noticed the fan turns most of the time - it's quiet, but you don't know is spinning."  I just implemented, so the CPU is busy enough. "A person with the e6320 says"and the fan is noisy and turns far too often.

  I just bought a new Dell Latitude E7240 with Windows 7 laptop and had the same problem with overheating and the fan is running loudly all the time. I just fixed it on my laptop, it may not work for everyone but just in case I walked it here.

  The index for me was that the question has happened at home, not at work.

  • Using the Task Manager, I found that a "svchost.exe" process was always running at 25% of the CPU, i.e. to take 100% of one of the 4 hearts. For this you need view all processes, and that's why you need a local administrator account if she asks permission.
  • With right click on this process-online 'Go to services', you can study what services are hosted by this instance of svchost.
  • For each of these services, try to stop one at a time (if it helps) and see if the CPU usage goes down. For me, a clue was a service stuck on 'Stop' but never stopped.
  • The service which for me was the "HomeGroup provider." That's why the issue has happened at home and at work. The laptop had spotted my homegroup on my home network, but had not been able to accede. Maybe a problem with IPv6 that I could not turn on my desk.
  • In the Services tab in Task Manager, get on the service properties, which set to Disabled Startup Type.
  • Restart the laptop, to ensure that the service is stopped.

  That did the trick for me, and now the CPU remains less than 5% when idle. This isn't the problem that the fan is noisy when the CPU usage is high, but for me what rarely happens now.

  If you want to access files and printers on your home network without the homegroup feature, you can still do that the old way:

  • Network and sharing Center-Online avancΘs => Homegroup Connection-online 'use user accounts to connect to other computers.
  • Also in the settings advanced: enable discovery network. and Turn on File and Printer Sharing.
  • Then, you can click on your wifi network => add a printer.
  • If your office does not appear, click on "Not listed", then browse. As long as the network discovery and printer sharing are enabled, desktop PC should appear and you can connect using your local Windows user name and password.

  Hope this helps someone.

  Peter

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• How can I run CHKDSK /F on a blue screen on Windows XP? I can not at all to a command prompt.

  I accidentally shut down my computer for an update.  Now I can only get a blue screen with a message saying that a problem has been detected and I need to disable or uninstall any anti-virus, backup utilities or disk defragmentation.  He told me to check my hard drive configuration and to search for updated drivers.  Then it is said to run CHKDSK /F to check for hard drive corruption.  The technical information is: 0 x 00000024 (0 x 00190203, 0x8638c6c8, 0xc0000102, 0x00000000).  I can't run Windows in safe mode, I can't seem to run in its final configuration, nor can I get it to go to a command prompt - it just goes back to the blue screen.  I also tried to put in my XP disc that came with the computer, and it helps not at all either.

  Unfortunately, the Microsoft Answers forum still does not prompt for any kind of information system when a new question is asked, so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  I think I'm about to lose hope on this fantastic.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all the other programs of cloud of 2015 but not PP2015.

  Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770.  You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.

  First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what?  In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard.  This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.

  I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error.  I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• Dv6000 lights at all, fan sounds not at all but the lights are on.

  I had the original problem was,... the DV6000 was having a difficult time starting at the top, you need to restart several times before it starts up and displays the HP icon, and continues with the startup process

  When I turn it on before, it just to hear the fan and turn on the LED lights for a minute, then shuts... I have to make a few attempts to start successfully.

  Now, a few days ago I tried to turn it on... the thing, it's the fan doesn't sound at all, so basically I waited and did stop light thing again, several times... many times, but nothing never happened...

  I'm sure that's not coz of RAM, two of them work when transferred to another (thus DV6000) laptop...

  Absolutely not the HARD drive because it works with the other DV6000

  I am that he is pointing to the BIOS.  I don't know what to do.

  BTW, I was done with the Hard reset and the commune on workarounds phone but nothing helped...

  

  

  Of Cisco Philippines with love_ _

  * I am not employed by HP, but I'll be happy to know that could I have helped *.

  

  Hi rjose_selena,

  Sorry to hear that it didn't work. Updates to the BIOS, I see there is one on HP.com, however it must be run from Windows, so if the computer is not started, you won't be able to run it.

  I have not done this with a laptop before, but with the desktop computers, motherboards have a "jumper reset" - it covers usually 2 pins (on a line of 3 pins). In desktops, move you this jumper to cover the other two pins (so if it is on pins 1 & 2, moves to 2 & 3) then power on. If it was me, and I was out of warranty, I would give this a try.

  You could also locate the CMOS battery (it looks like a watch battery, usually about the size of a nickel). If you remove it and press and hold power for 10 to 30 seconds, then reinsert the battery, it must clear the CMOS on the motherboard.

  Replacing the motherboard on a laptop can be tricky, but it can be done - I recommend you find some walkthroughs in line (if available) or any documentation you can before attempting this, if you decide to do.

  Hope this helps

• I can't open firefox running but not responding not window opens and says to close the existing window. I can't do that the computer does nothing to help. I did all the suggestions here. I uninstalled and reinstalled firefox

  Firefox does not open. I get firefox is already running but not responding no window... I tried to restart without help. I tried to put an end to the process via Ctrl + Shift + Esc and nothing firefox is registered to complete. I tried to find the application via the icon data run in the start window, I have no icon running on this system (Acer with windows vista (?)

  This has happened

  Each time Firefox opened

  The computer was hard to close and made an incorrect scan stop when it has restarted

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

  Uninstall and re - install Firefox does not affect your personal data and settings in your Firefox profile folder, unless specifically, you select this option when Firefox un0installing - but which removes "all your personal data and customizations.

  Have you tried to create a new profile after a cold start?
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows