Samsung clp-325 printer sharing no error "pilot multi - user cache could not be activated.

Similar Questions

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• When I try to install my software, I get an error message that "Windows Installer could not be accessed".

  Issue of Windows install

  I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

  Thank you, Jeanne Vecere

  You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

  IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

• Error "failed to loadlibrary error 126: the specified module could not be found" when you install the program

  Original title: error massage

  every time I load the software and then try to open it I failed to loadlibrary error 126: the specified module could not be found

  What can I do to fix this problem

  Hello rayl48,

  In addition to what offers Syed, you could try and update your video card driver.
  I saw the mention that the error is caused by a pilot video obsolete.
  Go to the website of the manufacturer of your video card and download the latest driver for your video card model.

  Or you can go to the computer manufacturer and seeif he is and he's driving for your computer updated model.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Live Messenger error: A conversation with (user name) could not be started. Please try again.

  When you try to send a text message to a number using Windows Live Messenger I get this error: "a conversation with (user name) could not be started. Please try again. "I can't send a text message to a phone using Windows Live Messenger. What is the problem?

  Ask in the Windows Live Solution Center Portal Messenger.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

  When copying the files, I get this error which is lower than
  an unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:
  error 0 * 8007045D: the request could not be performed because of an i/o device error
  filename DSc02828
  file type jpg
  size 3.27 mb
  updated the 09.11.2012
  try to jump again cancel
  Whats wrong here

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. where exactly you are trying to copy the file?

  Run check disk on the computer.
  a. click Start , and then typecmd.exe in the start search and then press ENTER.
  b. right-click on cmd.exe and clickrun as administrator.
  (c) in the command prompt, type the following command and press ENTER.
  Chkdsk /f
  Note: You may be prompted by a yes / no question. TypeYes and press ENTER.
  d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  
  Summary the link:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272

  Just reply with the results. I'd be happy to help you further.

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• Error 0x8007007E: the specified module could not be found. -Cannot add information to MP3 files.

  I use Windows Vista Home Premium - I get this error message when I try to add information to the MP3 files that have been downloaded.  MP3 CD files are fine, but the albums that i've got from amazon/play etc have no song on them information.  It's just empty.  It comes to getting the error message:

  Apply the properties file
  An unexpected error prevented the operation.  Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0x8007007E: the specified module could not be found.

  I downloaded a converter of flac the 21 day trial yesterday for a few songs that I had been sent - after I had converted to them I realized how stupid could download a trial for a product, then I tried to delete the folder.  One of the files inside not to remove (I finally got rid of him after cutting, gluing then delete), and this is after I initially deleted the contents of the file converter flac mp3 information has been destroyed and would not change.

  If anyone has an idea how to solve this problem - or even about what exactly I did to cause the problem - please help!

  Hey
  Try the steps in the article

  http://www.ehow.com/how_5705635_correct-tags-Windows-Media-Player.html

  Bravo!

• Windows Defender error 126: the specified module could not be found

  How to fix Windows Defender on Windows 7?

  For some time now, Windows Defender no longer works. I can't install new updates of definition and the service cannot be started. If I try to manually start the Windows Defender service, there is an error message:

  "Error 126: the specified module could not be found.

  However, I can launch the GUI of C:\Program Files\Windows Defender Defender. However, I tried to download the Windows Defender from Microsoft, but the installer launches because it is said that Defender is already part of Windows 7 x 64.

  I'm really looking for a way to get Windows Defender to rework.

  First of all, it's what I already know and what I don't want:

  • I don't want to disable Windows defender, I want to make it work again
  • I have no antivirus uninstalled or disabled Windows Defender software, the module really seems to be corrupted (I am software engineer)
  • I don't want to reinstall Windows or use the backup, because I don't know how far I have to go back
  • Windows Defender can be removed from the menu of functions and software, because it is part of the operating system
  • I do not have MSE installed, tried to install it, haven't changed a thing

  Any solution to solve this is appreciated. Advanced solutions (Registry hacks, enveloping, manual installs, work...) Welcome!

  Kind regards

  Florian

  I was able to fix this on my own. It seems that the registry has been damaged (as I thought).

  Changed the DisplayName property is property in the register of "Windows Defender" to "@%ProgramFiles%\\Windows Defender\\MsMpRes.dll,-103" which in reality should not be the cause of the problem, however, the DisplayName property original of the resource file.

  ServiceDll property have been replaced in the registry of
   
  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 c, 00, 65, 00, 73, 00, 25, 00, 5 c, 00, 00, 69, 57, 00, 6F, 00, 64, 00, 6f, 00, 00, 73, 77, 00,------.
  20,00,44,00,65,00,66,00,65,00, 6F, 00, 64, 00, 65, 00, 72, 00, 5 C, 00, 6 D, 00, 00, 70, 73,------.
  00,76,00,63,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  TO

  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 C, 00, 65, 00, 73, 00, 28, 00, 78, 00, 38, 00, 36, 00, 29, 00, 25, 00, 5 C 00, 57, 00, 69, 00,------.
  6th, 00, 64, 00, 6f, 00, 77, 00, 73, 00, 20, 00, 44, 00, 65, 00, 00, 65, 66, 00, 6F, 00, 00, 64, 65,.
  00,72,00, 5 c, 00, 6 d, 00, 70, 00, 73, 00, 76, 00, 63, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  in fact, which solves the problem. WIndows Defender is now in service yet. Updates can also be installed again.

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.