SanDisk Extreme Card problem

Similar Questions

• Problem with 16 GB Sandisk memory card

  Hi all

  I just bought a Clip Zip and use a Sandisk memory card to use with it. Unfortunately, while most of the library, there are a few artists who don't. I tried moving them on the player's memory, and then they operate, so it seems to be a problem reading the card, rather than the tags of the files. I bought the card from Amazon, so I eliminated the possibility that it might be a fake card. Does anyone have any suggestions as to what may be the problem?
  Thank you very much for your help!

  How many records you on the drive? Keep inmind that the zip has a database of song 8000 limit. anything above 8000 will not be crawled and appear not in the menu. If you have less than 8000 files can you put some of the bad files so we can take a look?

• SanDisk extreme 64 GB usb 3.0 flash drive problem

  Hi, my sandisk extreme USB drive is recognized as a hard disk, which appears in the section hard drives instead of the section of removable storage. I wonder how to solve this problem. Although it does not use normal with this drive, but it's just strange.

  PS. I am using windows 7 ultimate x 64

  SanDIsk was fixed drives and non-removable for awhile when he tried to support Windows 8 MS Go features.  There is no fix or the possibility to design autour.

• 16 GB SanDisk Extreme Pro SDHC UHS - I memory vs Kingston ultimateX card

  Currently our House has 2 cameras, a Sony Cybershot DSC TX5 and a Nikon D90. Cybershot uses a Promaster SDHC 4 GB then the Nikon uses a Kingston 16 GB UltimateX 100 x SDHC.

  These cameras are used for still images and animated images, so I was wondering, did anyone know the differences between the above mentioned cards in all terms and the 16 GB SanDisk Extreme Pro SDHC UHS - I memory card (other size, I mean).

  Thanks :)

  I don't know how critical these cameras are, but when you use cameras like the Canon XF-300 or XF-305, Sandisk is the preferred brand. Extreme against Extreme Pro gives you the same functionality, including sub - and appreciated, but the Pro version is almost double the price. The SD card on this device for custom image profiles and firmware updates that I use is the Sandisk 16 GB Extreme, not the Extreme Pro.

  Admitted, CF or SD is of course incomparable, but if I were in your shoes, I wouldn't go to Sandisk, Kingston, and according to the difference in price, I would probably stop the extreme version, do not spend the additional amount on the Extreme Pro.

  Just my $0.02

• Satellite A300-1NO - Player cards and SD memory card problem

  Hello!

  There are a few problems with the card reader built into my A300 1NO. If I put an SD (SD or SDHC) inside, he wants to recognize the cards as the XD memory cards. In Device Manager window is therefore a "Ricoh xD-Picture Card Disk Device" listed here, with a yellow exclamation point, and the card is not at all as by car.
  With Memory Sticks, there is no problem, the player manages them almost without problem.

  I tried reinstalling the drivers by running the installation program "Ricoh Card Reader", which is downloadable from the toshiba site, but it did not help.

  So what's next?

  Hello!

  Did you remove the old driver before installing a more recent?
  And you can format the SD card using the Toshiba SD memory?

  Normally, the card reader must be able to read SD and SDHC cards too. Have you tried the cards from different manufacturers?
  I use the SanDisk Extreme III cards, and don t have problem with these cards.

  Good bye

• SanDisk Extreme USB Flash Drive and SMART failure

  I just got 3 64 GB SanDisk Extreme USB Flash Drives and all three show SMART failures to reassign bad sectors. I struggle to believe that all three could be bad on first use. I use a program on a Mac (SoftRAID(4)) to certify all drives prior to use, including the SD cards and USB keys. I've never seen a failure so far.

  Readers see the successful certification but present a SMART failure.

  What is a disk problem or a SMART question or what?

  Thank you

  Lief

  I agree that it is unlikely to have failed on the first use. Most likely, it is a problem with the SMART attributes. IIRC sandisk can't CHIP for this product so it formats without error, and data can be copied onto the discs with success, I wouldn't worry too much on this subject.

• Cat long w/Sandisk-Extreme SD 80 MB vs extreme Plus

  I just bought this card Extreme 45Mo from Best Buy for $19.99 on cyber Monday.

  http://www.BestBuy.com/site/SanDisk-Extreme-16-GB-secure-digital-high-capacity-SDHC-1-card/1066224.p...

  

  But what I received this card at the bottom left in the package sealed the factory as the cards: SDSDXS - 016G - A46 80 MB on both
  

  ............... What I received... vs... Here is the new packaging
  

  

  I talked with a great Sandisk tech person (Bravo Jacob K.) and he said mine on the left is simply old label.  Sandisk website does not show this map of 80 MB "Extreme."

  The card that I got for $19.99 is actually an EXTREME PLUS card with EXTREME labelling and pricing.   Fix?

  1 can clear up this confusion of labelling more?  When and where this labelling extreme 80 MB was there?  Is this really old card?   The back shows 2013 copyright.     Extreme 80 MB extreme current vs more 80 MB is confusing?

  2. my new camera is a S110 cannon that "pourrait" work fine with just the Ultra 30 MB.  Is this 80 MB card no problem for the S110 or my old computer which probably isn't 2.0 USB 3.0.

  3. with regard to the speed of card: this card faster, IE 80 MB vs 30 or 45 MB, maybe a worse choice for a reason any?   Reliability, accuracy of data, service life, etc...    I ask because sometimes more is not better.  I remember student years of writable DVD and sometimes actually performing slower versions than the more recent/more rapid versions.

  Thank you very much for clarifying my 3 questions.   My last OLD camera was a card compact flash, so I catch a LOT about my old Tech savvy.

  O.K.   Nothing to say here.  My apologies.

  After some research, there is a change of label at one time.  The 80 MB extreme is extreme more than 80 MB.

  It's a little confusing, but it is not serious.  And, reading all the reviews from Amazon, it seems that this card is excellent.  People get different results of speed in real life according to what equipment they use in.

  Best Buy price, however, is a little interesting.  Get the version of 80 MB for the price of 45 mb during cyber week.

  Take care.   Changes of SD card about the speed/size/prices are crazy from just 2 years ago.  Memory is SO cheap!

• Why can't Photos read my sandisk sd card, but no viewfinder?

  I have a lot of cameras, and when I plug in my sandisk sd cards in my computer, I can always browse clips in the finder, except when I record the images of my panasonic ag-ac90 which shows nothing in the DCIM folder. Why is this?  I can view in newspapers and photos and transfer images in Final Cut, but why can't I see my images directly on my sd cards when I use this camera?  What is a camera problem or mac?  If anyone has an answer, I would be very happy.

  Thank you

  Ryan

  I guess the problem is with the way the cards are in the format. You should try to access cards with Capture of Image utility in the Applications folder.

• Iconia 8 cannot transfer files to the formatted Sandisk MicroSD card fat?

  Iconia 8 cannot transfer pix or formatted data to 64 g. Sandisk MicroSD card fat files?    Any way difficult?

  I tried to reproduce what you experience on the device, but have been able to copy files on the SD card without any problems successfully. How do you try to move the files? I didn't go in Astro Manager of files, search for a file on my Tablet and tap and hold on the file and select copy. Then, I went to the SD card in Astro, the directory I wanted to copy to and you click on paste. You can try and see if it works? If this is not the case, my best advice would be to try another SD card.

• SanDisk Extreme USB 3.0 unusable as Windows support install all other key 3.0 USB works

  Hello

  I've explained the problem that is described in detail in the following thread, please read full for understand what is the problem.

  http://www.wincert.NET/forum/topic/11021-SanDisk-Extreme-30-32GB-cant-go-on-at-install-destination/

  In short:

  The problem is in the stage of Windows where you select the partition to install it's unpossible click Next:

  An error message appears that says: cannot find any partition or create an install for... but the hard drive is visible and its also possible to create and delete partitions, so the error message is bull * beep *.

  My thougth is that sandisk stick is detected as disk sata hard and is internally by mistake folders as first hard disk, if I get out the stick at the stage where I select the partition, click Refresh, reconnect the key, other refreshment so I can install on the hard disk.

  What is the problem with your extreme poles? Any other key usb 3.0 works well.

  To pull the stick and so on is just a workaround dirty, I bougth the stick because of the speed!

  Greetz X 23

  Hello

  Nobody talked about windows to go...!

  You didn't read the linked thread right?

  To please you, and then you might think about your answer.

  You will find the most important information on page 3, if you

  don't have the time to read them all.

  EDIT:

  
      dotfusion, on 27 Feb 2013 - 23:21, said:
  
      @x23piracy,
  
      I have searched high and low for more more information ob this odd behavior. But all i can find is either not reliable or solutions such as the one tried. No real reason as to why or what is the problem.
  
      I suspect it has something do to with the way the partition tables are setup on the source media (in this case a san disk usb drive.) I would start there.
  
      amaltom61, on 01 Mar 2013 - 12:41, said:
  
      I had the same problem with a 2.0 8 gb drive. I found a fix on the net, Just create about 150 mb or more of unallocated space in the hdd or ssd you are trying to install windows
  
      Resizing a partition would do the trick but do a full back of the drive just in case
  
      Stimpy, on 01 Mar 2013 - 17:12, said:
  
      Windows setup will run a refresh on the USB bus at the point that you are having problems with.
  
      One way to get around it, is to pull the USB disk out, then put it back in, and go back one step of Windows setup, and try again.  This works in most cases with this error.
  
      bphlpt, on 01 Mar 2013 - 17:15, said:
  
      The questions remains.  Why is this happening with this particular brand/size of USB stick while it is not happening with others, and how to prevent this behavior?
  
      Cheers and Regards
  
      Stimpy, on 01 Mar 2013 - 18:46, said:
  
      It's a good question.  I also own the same drive, and have the same issue with it.
  
      I have a feeling that the controller in the stick is slow at initializing, and is simply not fast enough for Windows Setup.  If you watch the USB stick when Windows is setting up, you can see that it's being initialized, (just before setup asks what drive you want to install Windows on) as my mouse and keyboard also disconnect and reconnect at the same time.
  
      amaltom61, on 02 Mar 2013 - 13:05, said:
  
      Stimpy can be correct. One way i found to solve this problem is to create some unallocated space in the drive(150 mb or more). 
  
       bphlpt, on 04 Mar 2013 - 08:00, said:
  
      Even though you weren't talking about that, I don't know why it wouldn't work.  I've reformatted them before, Fat32 and NTFS.
  
      OK, I went looking for references.  Yes you can do it, but it seems it is not as easy to do as I thought, at least for everyone.  Some folks say the standard built-in Windows 7 tools do it automatically, some say they don't.  I still haven't tried it, since I don't have a USB stick available to partition at the moment.  Some references say that that you need to flip the USB removable bit so that Windows will see the stick as a fixed drive before you can partition it.  I also found  two different tutorials or how to partition a USB stick here and here.  So, yes, one way or another it can be done.
  
      Cheers and Regards
  
      Stimpy, on 04 Mar 2013 - 16:59, said:
  
      Yeah, I have looked in to this a while ago. And found that you cannot partition this USB stick. It needs to be seen by the system as a fixed drive, but for whatever reason, Sandisk are not interested in helping their customers out with this, as it is a simple change to the drives firmware, like you described. There is a rumour going round that Sandisk are going to realease an updated firmware that will make this drive compatible with Windows To Go, and turn it into a fixed disk. I think that's unlikely, but you never know!
  
      Have a look here, it seems Sandisk support simply does not care.
  

  Greetz X 23

• SanDisk extreme pro 128 GB cannot create the NTFS partition

  Hello
  I have a sandisk extreme pro 128 GB usb and I try to format it to NTFS in windows and it is impossible.
  The only way I success for formatting on my MAC but the NTFS partition is not visible in Windows...
  Use NTFS or HFS partition without problems, but on Windows the button does not work on my MAC and can...
  Does anyone have a solution for me?

  PS: I try windows XP, 7 or 8.1 nothing works...
  Windows see 2 partitions on my key, but cannot format.

  I just fix myself... about here was a good idea LoL

  So my problem was when I format the key the first time I use my MAC, and by default the MAC use GUID partition to format the key and on Windows, we should use MBR partition.

  Then when I format the USB on my MAC using disk utility, on the score of "variants" tab change when to create an NTFS partition MBR (instead of default GUID) partition

  After this, format the key and that's it!

  Its working fine now, I'm happy with this beautiful, design USB by Sandisk ;-)

• SanDisk Extreme USB key cannot be removed on Win8

  Hi, I use a SanDisk Extreme 64 GB USB 3.0 drive and whenever I plugged my laptop (thinkpad t430 with Windows 8.1 Pro X 64), and tried to remove it after use, the BONE guard saying that the device cannot be removed, and there is no other programs is going there. But there is none, so how to solve this problem. I tried the USB on Windows7 Pro X 64 drive without a problem.

  see you soon

  Hello!

  Please make a backup of the contents of the USB flash memory, then:

  1 - Turn off the PC.
  2 - Remove the USB key.
  3 - restart the PC.
  4 - Download CCleaner (free, Piriform.com, here x 64 portable version).
  5 - the CCleaner (cleaning and registry) pass to the PC.
  6 enjoy.

  Sincerely, Alfred.  (Google Traduce).

• SanDisk memory card from clipzip

  Inserted in clipzip of Sandisk memory card.  How can I get downloads on this card because my clipzip is full?  Also the map seems stuck in the unit.  Help!

  Hi Gerald w. Moore

  I understand that you have a problem with the performance of SanDisk clip zip. I'll be happy to help you with this problem.
   
  (1) what you mean by "How can I get downloads on this card?
  (2) you receive an error message when you try to connect?
  (3) have you made changes on the computer before this problem?
   
  I suggest you to contact SanDisk support for assistance.
  http://www.SanDisk.com/SanDisk-support/
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.