SAP and Oracle Grid Control

Similar Questions

• Oracle VM 3.0.1 and Oracle Grid control 11g

  Hello
  
  Oracle Grid Control 11g Enterprise Manager still allows to manage the Oracle VM on Oracle VM v3.0.1 as was possible on ORACLE VM 2.2.2?
  
  Thank you.

  user12046701 wrote:
  Oracle Grid Control 11g Enterprise Manager still allows to manage the Oracle VM on Oracle VM v3.0.1 as was possible on ORACLE VM 2.2.2?

  No, Control 11g Grid can handle 2.2. The next version of the Grid control will support Oracle VM 3.0.

• Edition of database repository for Oracle Grid Control

  Can the repository database for Oracle Grid Control standard edition?  Company limited license and cannot use enterprise edition for Oracle Grid Control.  Please notify.  Thank you very much!!

  The requirement is due to the EM dependency on partitioning, which is an option of EE.

  EM 12: Enterprise Manager Cloud control 12 c requires a repository database Enterprise Edition (Doc ID 1438655.1)

  Overview of the prerequisites set EM

  To ensure that the existing, certified Oracle database has the Option of partitioning enabled (therefore, make sure that install you it in Oracle Database Enterprise Edition.) Installation and use of the option of partitioning in the Enterprise Manager repository don't add fees to customers when it is only used by Enterprise Manager.

• Is it possible to do a host to connect with two Oracle Grid Control?

  Hi all
  
  We have 13 bodies Oracle local (host) that is connected through a remote Oracle grid control. Unfortunately, local COMPUTER group is not allowed to visit the remote ogc we have to check every day the guests one by one. I just installed a second ogc in local place. The question is what is it possible to connect to these local hosts of Oracle to the second ogc but do not take effect on the original? If possible, what is the procedure? As long as same as the installation of a new Agent Management Oracle or by using the Agent to exist? Please suggest. Thanks in advance.
  
  Best regards
  Guangming Duan

  I have two environments of GRID CONTROL. One is my SGD production and one is my WHO test. There are times where I need to test the functionality of CONTROL of GRID on HOSTS that have connected to my production, CONTROL of GRID of AGENTS. So, I install another officer in a separate ORACLE_HOME on these hosts configured to my TEST GRID CONTROL. The installation detects another agent and chooses the alternative ports. So guests have two agents, an agent connects to the WHO TEST and the other officer is connected to the WHO PROD with no port confilicts. Each agent consumes about 200 MB of memory. When I finished, I remove the agent connected to my TEST WHO. The 11g uninstall AGENT is very clean and efficient! / runInstaller-silent - uninstall 'REMOVE_HOMES is {$AGENT_HOME}. "

• Oracle Grid control Installationsur solaris 10

  Dear all,

  We have a database with Solaris 10 (64-bit) server OS and oracle 11g, 10 g and 9i as the version of database installed in it.

  We want to monitor all the data base with the grid control because it will give us the function to monitor all the DB system.

  Now, as we have only 11g, the latest version of db on the server.

  So, my question is that is it possible that we install the oracle 12 c grid control (11g grid control is no longer available for download) on another server and install the agent on all the db so that we can control according to the requirement.

  Future prospects for the expert views.

  Regarding

  Nimai kinzonzi

  -You can install EM 12.1.0.4.0 DB version 10.2.0.5.0 and GR 11, 1 material, but not with 10.2.0.1.0. Please refer to the certification matrix for more details.

  Thank you

  Sumesh.

• Oracle Grid control - installation of JDK

  I want to install Grid Control on linux 5. one of the steps is to install jdk1.6.0_18 from Oracle binary file jdk-6u18-linux - x 64 .bin. After I installed it, I checked the version of java and it does not seem right:
  

  CD jdk1.6.0_18/bin
  Java-version

  java version "1.4.2".
  gij (GNU libgcj) version 4.1.2 20080704 (4.1.2 - 51 Red Hat)
  
  I expect to have the 1.6.0 version but it shows 1.4.2.
  
  Can someone throw some lights?
  
  Thank you
  
  S.

  Hello

  It seems that the path or the CLASSPATH environment variable is pointing to an earlier installation of the JDK.

  The following link can help: http://docs.oracle.com/javase/tutorial/essential/environment/paths.html

  Thank you
  Cree

• Control of the database and the grid control

  Hello
  
  I installed Oracle 10 g DB and configure its control of DB. Then I added this database as the target of OEM Grid Control.
  
  My question is: after you add the database as a target for the grid control, be it still controlled by the DB control and the grid of the company control?

  It's good questiion Yes this will be monitor by both, please check both console and see

• HP - UX, pacthes via Oracle Grid Control

  Hello
  
  How HP-Unix patch (patches of OS) is supported via Grid Control? for Linux, the support is very comprehensive. What of Solaris, AIX, and HP-Unix?
  
  Kind regards
  Junaid UR Rehman

  Junaid Rehman says:
  Hello

  Can we download patches from the operating system (Unix) and store it in the library grid control patch? so that we can apply via GC?

  No... It is not supported for unix... It is available for linux only.

  Concerning
  Rajesh

• Need information on installing oracle 11 g R2 grid control

  Hello
  I am new to oracle grid control and his game.
  I have no idea abt SGD and Agent.
  steps I performed.
  (1) I have 1 DB on my machine.
  (2) download the grid software linux.x64_11gR2_grid.zip.
  (3) run the runinstaller.
  (4) for the opening of running Installer GUI there are 4 options.i chose no option No 4 - install the grid software only.
  
  Now please help me what is the next step that I have to perform. How do I place my checklist. How to fit my DB in the grid.
  I use the grid control because I have to configure the plugin EM for ten times.
  
  Kind regards

  Hello

  If you want to use EM 11 g Grid Control on 64-bit Linux, you must install the 11.1.0.1.0 version, which is available here:

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/linuxx8664soft-085949.html

  Note that the latest version of the EM is 12 c; However, if you still want to go with EM 11 g, the following support note documents the installation steps and has references to other useful notes:

  Enterprise Manager Grid Control 11.1.0.1 step by step installation (Doc ID 1059516.1)

  Moreover, the Concepts guide below contains information about 11 g EM including WHO and the agent components:
  http://docs.Oracle.com/CD/E11857_01/EM.111/e11982/overview.htm#CEGBFJIC

  Kind regards
  -Loc

• installation of Oracle 11 g grid control

  Can I install base data, weblogic and repository grid control in a single server, right? Based on the doc for oracle grid control, it seems good. Please notify.
  Thank you
  
  S.

  Hello

  Which option is the best?

  If you have a CMS and repository in different servers, you can have a more scalable configuration. More, you can also install several WHO (on multiple servers - 1 SGD per host) as shown in this overview:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/overview.htm#CJAHHFEA

  Of course, this type of architecture is more powerful and allow you to give more resources (CPU, memory) to EM Grid control. If you have hundreds of targets to monitors and dozens of users who can connect and use EM grid control, it may be useful to use this feature ( load balancing, several WHO,...):

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_addln_oms_slnt.htm#BABBGGAH

  However, if you have just a few tens of targets and a few users who may connect occasionally to the EM grid control, you can also install all {repository + WHO} on the same server.

  Anyway, in all cases, you must take into account related Harware requirements:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/appdx_hardware_reqs.htm#CACJBDGF

  And also, it is important to know the Port number used by any component to communicate with each other:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/firewalls.htm#i1005951

  Hope this helps.
  Best regards
  Jean Valentine

• What is the best version of Grid Control 10 g for OEL 6.5?

  Hello world
  
  Please find below the Oracle EM GRID control versions that I can download. and should I install for platform Oracle Linux Enterprise 6.5 are as follows:
  
  Versions of platform:
  
  Oracle database: 10.2.0.5.0
  Oracle Applications: 11.5.10.2
  Oracle Grid Control?:
  
  Oracle Enterprise Manager Grid faults:
  
  -Oracle Enterprise Manager 10 g Release 3 control Grid (10.2.0.3.0) for Linux x 86-64 DVD (part 1 of 2)
  -Oracle Enterprise Manager 10 g Release 3 control Grid (10.2.0.3.0) for Linux x 86-64 DVD (part 2 of 2)
  -Oracle Enterprise Manager 10 g Release 5 grid control (10.2.0.5.0) patch for Linux x 86 (part 1 of 2)
  -Oracle Enterprise Manager 10 g Release 5 grid control (10.2.0.5.0) patch for Linux x 86 (part 2 of 2)
  -Oracle Enterprise Manager 10 g Release 5 Grid Control (10.2.0.5.0) patch for Linux x 86-64 (part 1 of 2)
  -Oracle Enterprise Manager 10 g Release 5 Grid Control (10.2.0.5.0) patch for Linux x 86-64 (part 2 of 2)
  -Oracle Enterprise Manager 10 g Release 2 control Grid (10.2.0.1.1) for Linux x 86
  
  & Thank you

  Not sure if the link will work.  Connect on Mos, tab click certificates, and then look for in Enterprise Manager Base platform - CMS and select 12.1.0.3.   To view the results of 10g / 11g, search for Grid Control.

  https://support.oracle.com/epmos/faces/CertifyResults?_adf.ctrl-state=pg4eeyugk_158&searchCtx=st%255EANY%257Cpa%255Epi%255E931_Enterprise%2BManager%2BBase%2BPlatform%2B-%2BOMS%257Evi%255E76762%257Epln%255EAny%257E%257C&_afrLoop=43656021946880

• agent of undiscovered database grid control

  Hello
  
  I installed the agent 12 c under user oracle grid control-> we use oracle userid to install grid agent oem12c
  but I have a hypd database running on the same server under user PHyp. We used PHyp userid to install the hyperion database.
  
  now when I try to add the database in 12 c agent is not to find out.
  
  appreciate any suggestions.
  Thank you

  Assuming that the database in question is an Oracle database, check that:

  -The owner of the agent software can read the/etc/oratab or/var/opt/oracle/oratab file depending on the platform.
  Note: For the discovery of database work, it is necessary to have an appropriate entry for the database in the oratab file.

  -The owner of software agent (oracle) should be in the same group of BONES with the owner of database software (PHyp) to allow reading and enforcement officer some files in the database host.

  Kind regards
  -Loc

• Planning of a work of export using the Grid control

  Hello
  
  I had an obligation to schedule tasks for export in Oracle Grid Control 10.2.0.5 (Windows). Is this possible and have each done this? If so, please share the steps. The idea is to receive alerts when a job fails.
  
  Thank you.
  GB

  Here are the easy steps (there could be some slight differences as I'm posting screen of 11 g-based)

  1. the grid control console, click on the relevant database

  2. click on the tab "Data Movement.

  3. click on "export to export the files.

  4A chose the export type (Database / Schema / table / Tablespace)

  5. provide credentials to the host (OS user name and password) and click on "continue". You will get a new screen called ' export: Options

  6. click on the box called 'Generate a log file', and then select the directory object where you want to create the dump files. (You must create a database directory object, if you do not)

  7. choose the option that you required the content, then click on ' * following *'. You will get a page called ' export: files

  8. Select the directory object in the drop-down list and provide a name of filename format and click on "next".

  9. here provide you the job name and description, and chose repeat options (daily, weekly, etc.) and click "next".

  10. you will get a summary screen called ' export: Annex "." Review the details of your job and click 'submit '.

  It's the solution, and it works well.

• Grid Control 11g of the problems with the basic policy of RAC database

  We have a group of three nodes 11 GR 2 (rac1, rac2, rac3) and a policy based RAC database 11 GR 2 (ORCL) with cardinality 2 (ORCL_1 and ORCL_2) on this group. Used to monitor the Control 11g Grid infrastructure. Founded political RAC databases are linked to the pools of the server and not to the cluster nodes, therefore, restart the cluster database instances can run on both on 3 nodes in the cluster. For example, if ORCL_1 is running ORCL_2 and rac1 rac2 Sir after a full reboot ORCL_1 and ORCL_2 can be run on rac2 and rac3 respectively. Binding of the pool with two special nodes will be as if we use database RAC database administrator and not the policy based.
  
  Now the problem is that Grid Control registers the services in database with the node that is running the instance due to which, once the instances are started on a different node, she complained authorities are declining. We don't have to then reconfigure database instances and say Grid Control that they are now on another node. However, this removes the history of AWR for these instances.
  
  Is there a solution to this problem?
  
  Kind regards
  
  Kashif.

  Hi koko,.

  to work around this problem (I think that there is no "automatic" support in the current version of EM for switching hosts databases), you can create an ACTION_SCRIPT for your database cluster resource that is running the relocate_targets command emcli (so an emcli should be placed on all nodes of your and recorded with Super Administrator privileges). So every time you start your database resource, this script command / move the target to the current host without losing any historical information.

  Best regards
  Robert

  Edit: You can find an example of the command emcli in this document written by Rob Zoeteweij: http://oemgc.files.wordpress.com/2011/02/manage-node-failover-in-an-active-passive-setup-using-oracle-enterprise-manager-grid-control1.pdf
  In this scenario is an active/passive environment, but the command itself appies to your situation, too.

  Published by: Robert Hanuschke on August 1, 2011 13:11

• Requirements to install grid Controll 11g in Windows Server

  Hi guys,.
  
  I met application Grid Control 11 g on Windows Server that has an installed database and Enterprise Manager configured.
  I followed the official docs and viewing the video how to make the Grid control installation in OTN.
  I deconfigured Enterprise Manager, then installed the JDK. I installed Oracle Grid Control, but I ended up installing Web Logic, Fusion Middleware and then next is the grid. I'm on the right track?
  
  I remembered installing 10g grid and I just installed the grid and Agents.
  
  I'm on the right track? Thank you!

  The installation of OEM GC 11, you must first install WLS.
  Make sure it's 10.3.2 because it's the only exit from suppored to OEM GC

  Take a look at my Oracle SUpoprt note: step by step Installation of 11.1 Grid control * [1059516.1 ID] *.

  Concerning
  Rob
  http://oemgc.WordPress.com