Satellite 1100 - DVD disc in the missing device manager

Similar Questions

• Insert a disc in the drive \Device\Harddisk3\DR3?

  have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

  When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

  very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

  was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

  code attached

  new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

• How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

  There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
  Please help me to remove it from my computer!

  Hello lala80,

  Thank you for using Microsoft Vista answers Forum!

  hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

  You can disable this feature by using msconfig in Windows.

  Click Start and type msconfig in the search box and press enter

  Click the Start (top row)

  In the list of programs, uncheck hpqtra08.exe

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L300 - ODD has exclamation mark in Device Manager

  Please could someone help me with my Satellite L300 laptop?
  It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

  I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

  Remove the device from the list and restart your laptop.
  The problem again?

  What operating system do you use?
  You use your laptop to factory settings?

• Internet connection Windows xp missing device manager local of system restore won't work

  I have a toshiba 2405-s201 laptop that was running sp2, I tried to download sp3 after awhile, he stated that he could not install. now, my local internet is missing device manager is empty system restore will not work, I did a complete search of the file and he saw there. I tried to go to add/remove and said he could not be found. How can I fix it? Oh Yes by the way I am not very computer

  Hello

  You can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your computer. Thereafter, follow these methods & check if the problem persists.

  Reference: How to replace Microsoft or hardware, packs software service to order and replace product manuals?

  Hope the helps of information.

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• How to set the parameters of "Configuration ThinPro" via the HP Device Manager

  Hello

  Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from

  ThinPro Control Center-->

  Control Panel-->

  Setup-->

  Configuration ThinPro

  through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.

  I hope that I have forget something or you have another clue.

  Concerning

  Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.

  Concerning

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• Sony z3 appearing is not in the google Device Manager

  Sony z3 appearing is not in the google Device Manager

  I checked the security rating...

  even with my new Tablet sony z3.

  Strange thing. Are you ready to try the fix? Do it with CCP if you want:

  http://www.sonymobile.com/GB/tools/PC-companion/

• Intel(r) management Engine Interface cannot start (code 10), I get this message whem check the computer Device Manager

  I get this message whem check the computer Device Manager

  Intel(r) management Engine Interface cannot start (code 10)

  Thanks Ephraim

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download .zip here (if you can) to skydrive or a file sharing service

• CD/DVD does ' t appear in Device Manager

  My CD/DVD player does not play or CD/DVD category appears in my device manager.  Any ideas?

  See if this will help.

  http://support.Microsoft.com/kb/314060

• Satellite A100-1AI watch CD player but Device Manager shows the DVD player

  I own a Satellite A100-1AI and went from Vista to Windows XP?

  My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

  Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

  Since the switch from Vista to XP I have not adjusted my BIOS settings

  How can I make my DVD see CD and erase those unknown devices

  Thanks in advance

  Spon

  Just a question;
  You can read and burn CDs?

  Regarding the unknown devices:
  These devices are only compatible Vista and so there is no drivers for the mass storage controller.

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

  _Solution: _
  + This unit is probably the module of Robson former Turbo Memory. +
  + This hardware will only supported by Windows Vista. +
  + That is why there is no Windows XP drivers. +

  Greetigns

• Satellite 1100 keyboard froze during the recovery procedure

  I want to restart my 1100 satellite using the recovery CD. Unfortunately, I put in the wrong CD and the keyboard froze. When I start I press F2 to "start-up" but can't do anything after that.
  Any ideas how I can unlock things and back to normal?

  Hello

  Put the recovery CD in the CD/DVD player, turn on the laptop and immediately press the C button. keep it down for a few seconds and this will force to laptop to start select the CD/DVD drive as the first boot device.

• Drive CD/DVD not visible in BIOS, Device Manager or Windows Explorer - only during the analysis of the system.

  Until a few days ago, this problem didn't exist - I know.  My CD/DVD drive is no longer recognized in Windows Explorer, BIOS or Device Manager.  It doesn't, however, appears briefly in Windows Explorer in the analysis of the security of the computer.  It allows to open/close, etc.  and when it is visible, I am able to open the drive and see the contents of the CD.  Then it disappears again.  The light flashes indicating that he works and I can hear it trying to read the CD.  I uninstalled iTunes because I read somewhere that this may have been the issue - but that didn't work.  I tried the system restore, registry cleaners, removal of upper/lower case filters from the registry, used the program Fixit found on the site Web of Microsofts etc and still no luck.  Any ideas?  The computer is a gateway SX2850 (?) with Windows 7 Home Premium installed.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.