Satellite 1730CDT, exchange of DVD writer

Similar Questions

• Satellite Pro L10 - need DVD writer part number

  Could someone with a satellite and a dvd burner Pro L10 please give me the part number for the drive as I want to replace my dvd rom with a writer. Thank you very much

  Hello

  I Don t part number, but I discovered this Mat * a UJ - 830 s should be compatible with your device. Google around a bit and verify this info.

  Good bye

• Problem of satellite C series CD/DVD writer

  If I try to copy pictures from my laptop on a CD it seems to go through the process gives then a message "check failed". Same thing happens with a word file. Also, it seems a little hit and miss what happens when I try to run the copy.

  Maybe you should try different types of CD (CD - R, CD + R, CD - RW etc...)
  Also, the use of different burning software could improve the copy process.

• Satellite L10-205: CD Writer 2 DVD writer

  Mr. President is respected...
  I would like to know if I can change my laptop CD writer in DVD writer super multi. even instead of Toshiba

  I searched for a long time on this subject, but I don't have a specific answer, and so I decided to ask my manufacturer.

  So please I would like to have the answer as soon as possible.

  my laptop is Satellite L10-205

  Post edited by: mnkhani

  Hello

  Yes, I think that it is possible, because the L10-189 has a DVD Super Multi drive installed.
  Go to a service partner, they can build in the player for you. Otherwise, you will lose your warranty.

  Good bye

• Satellite A75: Problem external USB 2.0 DVD writer

  I have Toshiba Satellite A75 and try to connect external DVD writer in USB 2.0. The writer is recognized without problems. She can read and erase CD and DVD but when trying to save in Nero 6.6 I received the error message: "abandoned scsi command.

  Hi Arek

  In my opinion, there are many reasons that may be responsible for this problem.

  One of them is a conflict with other software of CD burning, that is currently or was once installed on the system. These other recording programs registry changes is the normal cause and only for cleaning the registry after removing the software will solve the problem.

  You have some other burning software installed on your device?

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• Need driver DVD writer for my Satellite L300

  Hi guys that I really need help.

  For some unknown reason to myself I have sewing to have deleted the drivers of my laptop DVD writer.
  It won't play or write disks, I have tried every disk there.

  Its saying the _archive is missin or corrupt_,
  I'm not sure that I now need to address this issue the drivers or so i ' l'll have to reset the settings of factor.

  * Can anyone please help, thank you *.

  Optical disc drive using the standard Microsoft driver and there is no special driver for this device. Optical drive should be automatically recognized by the operating system.
  What is the STRANGE situation in Device Manager?

  Of course, for getting new factory settings is simplest and easiest way to get it working again, and it can be done very simply - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• Satellite A200 PSAF0A - cannot use the DVD writer / reader more

  Hello
  Anyone has any advice on this?

  Laptop: Satellite A200, PSAF0A
  Require: DVD burner / player sofware.

  My hard drive died last week, so a techno guy installed a new and reinstalled the OS (Vista)... everything works fine. But don't have Toshiba Utilities for the use of the DVD burner / player more. Where is it? I downloaded the player to DVD from Toshiba, but it does not work. It doesn't do anything. Media player plays sound but no video.

  The software that I used to play DVDs accompanying the package when I bought it; InterVideo WinDVD I remember well.
  I downloadeded V 8, but it does not work either. I need Codecs etc, right?

  Looked at Toshiba Europe site for the DVD player, but I think it's the same DVD s/w that I have already downloaded.
  But there is no download of my model, PSAF0A (Satellite A200) in all cases.

  I do not have the CD - they are comfortable in another country! (Unless, of course, my nephew is using them as a frisbee that could well be the case). Help!

  It seems that Toshiba do not publish the DVD software on the site... maybe its due to the issues of the region / license?

  Try AVS DVD Player (its free).
  If you need a MPEG2 codec, install ffdshow

  The two are in http://www.free-codecs.com

• Satellite PRO P100 - 383 DVD UJ - 850 s Firmware update

  Hello

  My laptop is a Satellite PRO P100-383 with a DVD burner MAT * a UJ-850 s.

  The current firmware of my DVD writer UJ-850 s MAST * one is 1.10 and I can't write some DVD-R, because they are not recognized as DVD-R, but as a CD - R. I think it's just the firmware of DVD writer that is too old.
  Is it possible to update this with new firmware please? because I found something in the download section for my laptop. Just drivers and BIOS of motherboard, but nothing on the MAT * an update of firmware UJ-850 s.

  Thank you very much for your answer.

  Friendly.

  Philip.

  Hi Philippe

  In my opinion you shouldn't change something but use high quality blank DVD - R TDK or Verbatim.
  Maybe you use some blank media cheap and without name.

  Have you tested with known brands?

• Satellite M45: Mat * a DVD - RAM UJ - 831S burning question.

  I have a Satellite M45. I have problems with my DVD writer. I worked very well, now I'm having issues. It will read and play DVDs and CDs; However, when I try to burn it says D: / / is not accessible incorrect function.
  The machine worked before, this just started happening.
  I tried the firmware update, but it says that the target drive is not connected.

  Any help?

  Hello

  The message D: / / is not accessible occurs after the burning process or before you start to burn?
  It is possible that you have not closed the writing session.

• Satellite A50-104: after DVD drive upgrade - error IDE #1

  Hello

  I have a Toshiba satellite A50-104 and to replace the SD - C2612 DVD standard player for a NEC ND - 6750 A DVD Writer but after reinstalling the drive and turn it on I get a message of ERROR IDE 1 before windows XP starts up and the drive is not recognized. I tried to detect the drive by using the Add Hardware Wizard, but it does not detect.
  Can you please help.

  Regards Gary

  Hello

  I'm not sure but I think that the Toshiba DVD r /-RW / RAM (number P000399450) drive must be compatible with the Satellite A50.
  It is also called DVD Super Multi drive, UJ-820BTJ6-A (G8CC0001S210)

  I found it on this page:
  http://www.impactcomputers.com/p000399450.html

  But generally the best way to control the compatible parts and devices is to contact Toshiba service partner in your country.
  Here, you will get all Hamade on the right parts.

• DVD writer will not realize any sound recording

  I can burn the video portion of the DVD very well, but there is no audio data. all retired to device mgr. When I run the HP optical drive test, get a 'mistake' contact support '.

  Hello peter47,
  
  There may be a problem with the DVD writer into the computer.
  
  What make / model of computer are you using?
  What operating system?
  What program do you use to burn the DVD and have you tried multiple?
  You can burn CD which is just audio or do they have the same issue?

• Satellite Pro A10 - CD/DVD drive has stopped reading discs

  Hello

  I have an old A10 Pro Satellite which has a DVD rom stopped reading discs.
  He goes through the motions but does not display anything.
  I am attaching a new external DVD RW via USB, and it has the same problem.

  Anyone have any ideas?

  Concerning
  The

  Hello

  you mean that the external hard drive does not work too? Some software blocking your disks?

  I think that the best way to check if your internal drive still works would try to start with a bootable CD (perhaps with a live linux distribution on it) and to try this with the external hard drive also.

  If you're really a software that prevents the drive work properly, then you should recover your machine with the recovery media to make the drive work again properly.

  See you soon

• Satellite A100 - WXP Recovery DVD Installation via USB

  Hello

  I have a laptop Satellite A100 and the DVD drive no longer works. I don't want to waste money on an external DVD drive. I want to install the recovery from a USB device. I copied my recovery disk image and saved as ISO.

  My window of recovery of origin is "Windows XP Media Center". I don't want Linux operating mode. : P

  I tried several methods, but they did not work for me. (Unetbootin, Ultra ISO, etc.)

  If someone could help him in any way will be appreciated.

  Kind regards
  9

  As far as I know it doesn t work on this image of the way and the recovery can be installed with the bootable recovery disk. You can not simply copy all the files on USB and install recovery image.

  This should be easy kind of manipulation that can be used on the different laptop models. Please note before recovery image installation begins the data in the recovery image and data saved on the motherboard should be compared and if this doesn't match t, you will be unable to install the recovery image.

  ODD for this old model of laptop is not expensive. You can find used one on ebay and replace it yourself. If you need assistance, we can help you.

• DVD HP dvd200i drive: HP DVD Writer dvd200i installation software

  I removed my OEM HP DVD Writer dvd200i from HP Win XP machine died at a Win 7 machine.  It is not recognized, so I guess I need s/w installation.  Am I correct, and where can I get the s/w?  I searched HP support and can't find any s/w installation it for HP DVD Writer dvd200i model.

  What you need is not the installation software, but a driver.

  To appear in Device Manager?  If so, clidk right it and update driver.  It must install at least one generic driver.

  This isn't a young unit and unfortunately HP only provides drivers for it up to Windows XP.  You try to install the driver compatibility by right click on the downloaded exe file then compatibility mode.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=81681&