Satellite A-C50-1GZ - wireless not detected DNS server

Similar Questions

• Satellite - 14G - L855 devices are not detected in the Device Manager

  I reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8). And there's a problem: many features is not found, like ethernet / wireless. Also found Radeon HD 7670 M video card. I can't install the drivers, the apears to errors that my hardware is not appropriate with the software (e.g., chipset). On the toshiba Web site, I typed the serial number of my satellite, but my computer is not found. What wrong with this laptop?

  Same problem here: [http://www.tomshardware.co.uk/forum/386506-33-devices-detected-device-manager-format-win7]

  What should I do? I tried many drivers but no one works. Please, give me advice. Thank you.

  Toshiba Satellite L855 - 14G (Toshiba EUROPE GMBH)
  Part. N ° PSKFWE-00H00FG3
  Intel(r) 3210 M i5
  AMD Radeon HD M 7670
  4 GB RAM DDR3
  Windows 7 Ultimate 64 bit

  Hello

  I ve checked the download from Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and all the Win7 64-bit drivers are available.
  Have you tried to install all the drivers, tools and utilities from there?

• Satellite Pro L300 - HDD is not detected

  My Satellite L300 hanged while I used it. I tried to restart, it just wouldn't start. It shows this message on the screen "no bootable device-insert boot disk and press any key" tried, but it still does not work. Then I tried using the restore disc. It then displays a message on the scree that the hard drive is not mounted which means that it does not detect the presence of the HARD drive.

  What can I do?

  Hey,.

  This looks like the HARD drive is not recognized, so your computer isn't able to boot and disk HARD recovery doesn't work correctly

  I recommend you check the BIOS if the HARD drive is recognized correctly. Usually in the BIOS, you should see the correct HARD drive model number and it would mean recognized s. Otherwise, the HARD drive is faulty and must be replaced

• Re: Satellite P300-150 - battery replacement not detected

  Hello

  I bought a replacement battery for my laptop that I got an error message saying that I should replace my battery.

  I bought a compatible battery, but it is not detected by my system.

  The battery indicator was strong when I plugged in for the first time in the power adapter, as it was when my old battery charge - but now it blinks in and out.

  I can't boot from the battery alone.

  Battery: PA3536U-1BRS, 4000mAh

  New: PA3536U-1BRS, 7800mAh

  Running windows 7.

  Any help would be greatly appreciated!

  Tom

  Post edited by: tomangegi - got a bit mixed model number

  Is the new battery compatible and listed as replacement for your Satellite P300?

  Somehow I think that it is not compatible and original Toshiba battery. I'm wrong about this?

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• Satellite A300 - S-video does not detect TV

  Dear all
  Last week, I bought your new product: Toshiba Satellite A300

  I liked its release specifications specially s-video.
  When I arrived at my house, I have it plugged into my TV:
  Bomba Toshiba 29A3MJ
  http://www.Toshiba-Gulf.com/site/product/prd_details.asp?prdid=1044&CATID=123

  I used S-Video/RCA cable:
  http://www.accessories-shop.NET/images/5FT_4_PIN_S-VIDEO_to_3_RCA_TV_male_Cable.jpg

  Then, I put the TV fashion which I usually use to another laptop.
  I kept clicking on Fn + F5 on the satellite phone without exploitation.
  Nothing has been posted on the TV screem.
  Before, I used to connect to HP Pavilion dv2000 in the same TV using the s-video and it worked fine.

  Please advice how to solve this problem.
  Best regards

  Hello

  Usually, this should work.
  Both devices must be OFF. Connect then the laptop and the TV using this cable.
  Turn on the TV and the laptop starts.

  If the use of the FN + F5 will not detect the image on the TV then I would recommend checking the settings in your graphics card properties.

  I put t know what graphics card you have, but my Satellite phone has been equipped with the Intel graphics card and I can change the settings in Control Panel-> Intel GMA graphics card.

  Maybe your laptop supports the ATI card. If these parameters were in ATI catalyst.

  PS: Check if you are using the latest version of the BIOS and the latest graphics card driver too.

• Satellite L40 - no HARD drive not detected in the BIOS

  Hello

  I need some advice here. I have a Toshiba Satellite a colleague here, type L40 - 14N. She wanted to run the Toshiba Recovery CD procedure to get back original configuration... system was going way too slow and all that, no other problems. Anyway, she's not very experienced and one way or another the recovery failed.

  Problem is that the system does not detect a HARD drive now more for some reason any. Not in the BIOS, not during the procedure of Toshiba Recovery CD if I start it now. I also tried a Vista installer retail and loaded drivers SATA raid as mentioned on this forum. Without success, no HARD drive detected.

  It's weird, because nothing essentially. Any suggestions how I could solve this problem and get the HARD drive online?

  If the HARD drive is not detected, the installation of recovery will not work and also a Microsoft installation disc.
  The HARD drive should be detected in the BIOS, otherwise that an installation is not possible.

  However, it seems that the HARD drive is defective because the BIOS peut t detect it.
  If your laptop is in warranty got a local ASP or you change the HARD drive by yourself.

• dv9000z wireless not detected

  I install windows 7 and for a few days that my wireless works perfectly but all of a sudden I will turn on my computer it and it is not at all detected. The only way that I can use internet is by connecting the cable directly to my laptop.  It seems that windows is not DETECTING I have even a wireless card. Which driver or an update do I need? dv9000z

  MP,

  The Broadcom WLAN for Windows 7 driver is here:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45524.exe

  -Wes

• Satellite M105-S322 - HDD does not detect

  My laptop does not detect the hard drive. I press F2 to go into BIOS and it says hardrive No. I reinstalled the hard drive, but it still says the same thing. I have test the SATA hard drive on the desktop and it detects its.

  What seems to be wrong? Help, please.

  > I have test the SATA hard drive on the desktop and it detects its.
  This looks like your HARD disk on the motherboard controller is faulty
  But before that you exchange the motherboard but I would test another HARD drive maybe the HARD drive is faulty and will recognize only on certain computers or mothers.

  If a new drive HARD doesn t work too, your motherboard needs to be replaced.

• Satellite Pro 6100: modem is not detected

  Hello

  Windows XP does not detect my modem.

  Driver downloaded from the toshiba Web site, instaled it and still not found modem.

  Any ideas?

  Thank you

  Hello

  In my opinion, there is hardware failure. The best way is to contact the Service of your country partner. They allow to check the unit. For the moment, you can try using an external modem. I don't know that one of your friends can borrow you a.

  Visit the Toshiba page under http://eu.computers.toshiba-europe.com. Click Download & support and you will find a link to the list of service partners.

  Good bye

• Satellite P10 304 BIOS does not detect HARD and CDROM drive

  My HDD p10-304 has recently failed.
  I bought a new 60 GB western digital 2.5 drive "and installed today.

  At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
  This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

  I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

  The only difference is that the insulation on the original drive sleeve should be reduced by half.
  The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
  Few albums I had to remove but that should be no problem.

  Someone at - it suggestions?

  Thank you, Stu.

  Hello

  What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

  You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

  But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• Satellite L755D - 14 c does not detect Bluetooth after installing Win 7

  I have laptop Toshiba Satellite L755D - 14 c and I used to use my internal Bluetooth in my old system of operating Windows 7 64 bit, then I reinstalled Windows 7 and all of a sudden the Bluetooth went

  I tried to installed the driver but nothing happened, as the device was not there at all.
  Now I have Windows 8 64-bit on my laptop.

  Can you help me with my problem?

  Hello

  Satellite L755D - 14 c belongs to the PSK36E which was equipped with the Atheros WLan card series. This wireless network card supports BT as well.
  Because of this, you need to install additional software called Atheros Bluetooth Filter Driver Package. But this step is necessary only running Windows 7!

  If you what to know how the product?
  Install first the Atheros WLan card driver, then the Atheros Bluetooth Filter Driver Package and, finally, the battery Toshiba BT.

• Wireless not detected

  Under Vista and my PC is no longer detect ANY wireless connection! Went through the configuration of the network again and name checked group home page but when I click on same as nothing is detected, nor for any other network.  Need advice please.

  Hello

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• Equium material P200-1ED wireless not detected at all...

  Hello

  You have a problem with my parents computer laptop and I cannot for the life of understand me.

  The wireless on the laptop disappeared completely. It was working fine last night and since then to turn it on this morning, it didn't work. The are no wireless connection in the Connections window and in the Device Manager, nothing is found. Windows is not saying there is a material must be installed and I can't find the drivers to uninstall.

  I tried to install the latest drivers and still nothing was found. Few at the front of the laptop to turn on the wireless or disable control IT. By pressing fn and F8 (the wireless function key) does nothing no more.

  , Someone has any idea how to solve this problem? Any help will be greatly appreciated.

  Thank you very much.

  Hello

  If WLAN adapter is not listed in Device Manager, it means malfunction wlan. The best way to check whether it is hardware or software/driver associated is to restore the settings from the factory with a recovery disk. If she did not always appear, you must contact the service center for repair or buy the usb wifi dongle.