Satellite A10-S169 turns on but no display at all

Similar Questions

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• Satellite A100 screen backlight works, but no display

  Just in the process of establishing a Satellite A100 that works very well through the connection of the external monitor but when switched over to using Fn + F5 LCD screen, the backlight turns on but there is no display at all, just a black screen lit.

  I suspect it is the screen that is past and not on the cord (have a screen on order) so will update here but I just thought that I would keep you updated on the progress.

  Has anyone else had this error?

  Steve

  Hello Steve

  The fact is that your laptop is a malfunction of the equipment, and it must be fixed by replacement. To ask if anyone has had this fault won't help you a lot. You need to fix it anyway.

  My question is: might want to fix you alone?

• Satellite A500-148 turns on but does not start

  Hi all, I have a Satellite A500-148 from a friend who asked me to take a peek, it turns on, but does boot when I press the following power button occurs:
  -The power button and the charger are on and the hdd led only flashes once
  -The fan comes on for about 3 seconds
  -No image on the screen, I indicated a light against it, but there is really no image

  Tried to reset by pressing the button for 30 seconds without the changer is plugged.

  I disassembled it and noticed that this laptop has an external video card, so my question is, who's broken the video card or the motherboard.

  Thank you

  To be honest I don't understand this with an external video card. Can you describe how you mean exactly?
  In any case, on this virtual path, it is not easy to offer the exact diagnosis. You can try the little test and remove this external adapter, RAM and HARD disk, and try to start again.

  Ask your friend if he had something that may be responsible for this.

  One last thing: laptop stays in r might have turned off after a certain time?

• E250R dead? Encoder turns on but no display

  The wheel turns on when I plug in the USB cable, but not display (black).

  My XP PC recognizes it as a USB device only, not as a Sansa player. Requests to install software via the new hardware wizard. Still no display. Windows Explorer does not list an icon in the list of drives.

  Pressing menu seems it turns off after 15 seconds, but the same thing happens when turn on - no display.

  This player sat unused for a few months, now this problem...

  Any suggestions? Loved this little player!

  You can try removing the battery for a few minutes and re-install. Sometimes this 'hard' reset will work when the 'soft' press the power button & hold does not work.

  You should try the suggestions in this post following. If you still have the blue ring of death, there is a complicated procedure of Linux that you can use as a last resort. Details can be found here.

• Satellite P10-304 turns on but the screen is off.

  Hi there... Please someone help me. I m having this problem since last week with my P10-304... it was working fine... but now last week I turned it off and turned the morning we return on the use of battery that he kept on going stand-by mode... and when I turned it off again and plugged the AC adapter is on, but screen didn't seem to turn on...

  I thought that the screen has gone... but last night I turned it on. He walks and went to hibernation! Don t know why. And now the same problem again... I turn power turned blue and the screen is blank (as it s off) I put t know what to do. I tried using the recovery disk. But nothing comes on the screen, as I said, the screen is blank as is it turned off s.

  Please help me... !!!

  Hello

  Well, this is a strange question. It's not easy to say what can be the problem.
  But first you must remove the battery and the AC adapter for 1, 2 hours.
  After this procedure, use the power supply for the test to work.
  If the problem is still topical, I guess that it s a hardware malfunction.
  In this case, the best way is to contact the service partner.

  Best regards

• Windows 7 Upgrade but the display is all wrong

  I have a Dell PC with an Intel Pentium 4 processor 2.20 GHz, 2 GB of DDR SDRAM 333 MHz and an integrated Intel 3D AGP graphics card.  After upgrading Windows XP to Windows 7, the view is terrible.  Background is blurry, icons are huge, and pop-up windows extend beyond the screen.  In Control Panel, appearance and personalization, the screen resolution set, the only option of 'Display' is "E1909W (Analog) from Dell on the Standard VGA Graphics Adapter" and "Resolution" drop-down list is locked at 640 x 480 (i.e., no other resolution options are able to be selected).  I'm afraid that my system is not capable of supporting Windows 7 but am not sure if any help or advice is appreciated.

  Hello

  You must visit the Dell Support Web site.

  http://www.Dell.com/support/home/us/en/04?c=&l=&s=BSD?c=us

  Enter your Service tag number to find your product

  * How to find the service tag locate the label service

  Once your product is check in drivers & downloads, if any display driver for Windows 7 is available.

  If so, update the driver and check if you are able to change the resolution or not.

  If no display driver is available, then your machine is not compatible for Windows 7 Upgrade.

  In addition, you can share your Dell service here number & I'll check the rest for you.

• Satellite L450D-11V turn on problem - no power at all - please adviset to

  Hello all - hope someone can help with my application

  I was using my laptop 2 years normally and off last night by the usual method - start - stop. Had no problems at all with this laptop because I got it.
  No notification that batteries charged not etc.

  This morning when I went to turn it on, it could start. I noticed that there is no green light on the front panel. By pressing the on switch, nothing happens. All indications are that no power is getting to the laptop

  Removed the battery and replaced it
  Checked cable/lead/plugs/all earthquake power plug connections - all pushed in etc - etc.

  Husband has exactly the same model, so we tried switching battery - its has been completely loaded, my laptop turns on not with its battery
  Also I tried using its power cable - nothing happened.

  Don't Wan to spend a fortune on it - it would be just as simple as a fuse or something - any help appreciated!

  see you soon

  Hello

  You can start your laptop with AC only (removed battery) power?

  By the way: check it please http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm

• Upgrade of RAM for Satellite A10-S403D

  Hello

  I have a laptop Satellite A10-s403D, quite old, but still works fine. I would like to add a few more memory (there now 256 MB).
  Could someone advise me as to what type of RAM to use (I'm completely lost with all these formats available)?

  Thank you!

  Hi Roman,

  Please see the link depending on which has the details of the RAM for your laptop.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24882&ft=m&St=3

  Kind regards

• Need drivers XP for Satellite A10 S811

  First of all thank all those who will answer this one. I have a friend with this odd model of Satellite A10 S811 and its Windows I screwed it all up. He lost his CD so I can't just him, I have the CD to install Windows XP from my old machine, but I don't have drivers for help. And on this site I can not simply to find the drivers for this model? Am that I missling something or what?

  So the question is: where to find drivers Windows XP for Satellite A10 S811?

  Hello

  Please ask your friend if hs A10 is a European model for laptop (I think it is). If visit Toshiba download page and simply download and install Yes al list drivers, tools and utilities for Satellite A10.

• Satellite C660 - green light comes on but no display

  Hello

  I have 3 laptops Satellite C660 all do the same things.
  The power is turn on and get the green lights but no display on the screen. It happens from time to time.

  Anyone know what I could be the motherboard is going or is it over heating?

  Thank you

  I can't say with certainty what part could be affected, but fact is that if the Toshiba start screen does not appear at the beginning of the startup procedure. This means that the self-test isn t power began and could not be passed correctly. This could be linked to the problem of the motherboard or part connected to the motherboard. That is to say. RAM modules.

  I recommend if possible, check the modules single RAM.

  High internal temperature may affect the functionality of the laptop too. But you can avoid these problems, clean the cooling and cooling grids fans from time to time.

• Broken screen, external display mode standby with Satellite A10 S203

  Of my Toshiba Satellite A10 S203 screem is broken, it's all guts, the colors and the black spaces. I plugged the laptop with an external display, but as soon as Windows starts the external display is in stand by. How can I change this?

  Hello

  I had this problem as well before. After Windows starts the video reset Resets the video output to LCD screen instead of external monitor. Once this is the case try to use the Fn + F5. If this does not work, you might be able to start and press F8, once it gives you the windows selection menu go to safe mode. Once there go to video properties and change the default settings for the external monitor and try to restart normally. Should do wonders. Hope this helps, if not let me know.

• Satellite A10: RGB Port is not installed - can not use external display

  Satellite A10 the RGB PORT is not installed & cannot be used as external display. I tried to install the communication or COM 1. interrupt code. What are the possible solutions?

  Hello

  What did you mean by "not installed"?
  Generally, you don't need to install anything. You don't need any drivers for this port 3.
  Windows XP drivers should work properly.

  Please check device manager if there are errors or yellow exclamation points.
  If the problem occurs for a short time, you can try to use the WinXP restore tool.
  This tool will reduce the BONE until the start.

• Satellite A10-S403D: NO start UP but the LED code flashes (flash)

  Hello

  I want to understand what is happening to my Satellite.

  When I try to start it, it does absolutely nothing but orange flashing:
  Short-Long, short-short-Long, short, Long, Long

  How can I understand the meaning of the code please? :-(

  Thank you very much for your help!
  Bye bye!

  Hello

  It is a firmware simply displayed if no hardware problem have been located on the motherboard.
  The LED provides this firmware and only the technician can read this code.
  OK, you will probably be able to read this code, but you will find all the details on the meaning of the code.

  I found a useful description how to read such a code.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16497&MessageID=60354

• CLJ CM6040f MFP: Trainer replaced, display now turns on but the touch screen is unresponsive

  Original malfunction has been sounding like turn, but not display. Replaced the trainer, now displlay is on, but does not respond to the inputs of the touch screen. What is the sequence of corrective to fix a malfunction?

  Try this:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03559852&sp4ts.Oid=3356526

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...