Satellite A200 - built-in camera is missing

Similar Questions

• Satellite A200 starts with the message "missing operating system".

  IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

  I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

  Can you make suggestions?

  Hello

  Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

• Satellite A200 - 1 M 8 pilot missing to control memory PCI

  Hello world. As the subject says, I am missing a driver for the PCI on the above mentioned Toshiba memory controller. There is the driver for Windows XP and Vista, but there isn't one available for W7. This driver is apparently available in the package of Robson. I tried the one for Vista, but it's no party.

  All solutions?

  It is Windows 7 Enterprise, 32-bit.

  Hello

  All these Satellite A200 Toshiba page use us the same chipset driver Windows 7 beta.
  You can see if you choose for an A200 Chipset driver and then you can see of the models involved.

  Good luck! :)

• Need for Satellite A200-1 g camera assistant software

  Hi all

  I have a problem... I need to find the software assistant camera for Toshiba Satellite A200-1 g
  Can anyone help?

  Thank you!!

  > Can anyone help?
  Maybe, but you should tell us what operating system you are using.

• Satellite A200 - 1 M 8 - drivers missing for Vista 64-bit

  * Material: *.
  Toshiba Satellite A200 - 1 M 8 (PSAE6E):

  OS: Microsoft® Windows Vista Home Premium
  Version: 6.0.6002 Service Pack 2 build 6002
  Producer of system: TOSHIBA
  System model: Satellite A200
  Type of system: PC x 64
  Processor: Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz, 1801 MHz, Cores: 2 logical processors: 2
  BIOS: TOSHIBA V2.60, 2008-08-28
  RAM: 2 GB

  * Problem: *.
  After you install all the necessary drivers (Chipset, Robson, graphic, sound, Lan), I go to Device Manager I see "Other devices" category :-(
  It lists: _ _ "Control of mass storage" and "Untitled Device" _. Any help is appreciated!

  Greetings - Andrew.

  Hey Buddy,

  It is difficult to say that the drivers you still need because Satellite A200 is not Windows 7 64 bit supported. With other words Toshiba doesn't provide all the drivers for this model and Windows 7 64-bit.

  What you can try is using 64-bit Vista drivers. Usually, most of them should work on Windows 7 64 bit.

  Mass storage controller could be the reader of card, but about the device without title I n t have an idea, so you need to check the vendor and device ID.

• How can I get the disks for Satellite A200-13R?

  Hello world

  I have labtop (Satellite A200-13R), it came with windows VISTA, but I didn't like it.
  I installed Windows XP SP2.
  But I've lost readers
  How can I you readers?

  Cordially and Thankx...

  I don't understand how you lost the drivers but if you want to find drivers please visit the download page for Toshiba under http://eu.computers.toshiba-europe.com > support & downloads.

• Can a second hard drive be added to a Satellite A200-298

  Hello
  I have a Satellite A200-298 which came with a hard drive of 200 GB, I wondered if it was possible for a second hard drive more to be added to help with Itunes that is storage of files and movies.

  Post edited by: Irishdiver

  Hi mate,

  Unfortunately, there may be a second HDD to be added because if your machine has only one disc and then the other drive hard bay would not have an installed hard drive connector.

  I would buy an external hard drive and store my stuff there I was you...

  Welcome them

• How to uninstall Microsoft Office trial on Satellite A200?

  I have a Satellite A200. It came with Vista Premium, but I've since upgraded to Ultimate. It came with a 60 day trial of Office 2007, which I'm not interested. I installed Office XP (that works). However the emails etc. documents will be opening in Word 2007. Installation because this causes an error, even if it still seems to work when you get rid of the error message.

  What I really want to do, is to uninstall the trial. However he won't let me - it goes through 'Preparation to uninstall' and then disappears and nothing has changed and the program is still there. In the Microsoft Office folder, 2 versions seem to have become intertwined. I uninstalled Office XP and tried to uninstall 2007 after that, but still no joy.

  Don't know if it has something to do with the fact that the installation did not complete successfully.
  Any ideas anyone on how to get rid of it?

  Val

  Usually, you should be able to remove applications in Windows Vista-> software settings.

  What you could do is to remove the whole Office 2007. The Office usually remains files here:
  C:\Program Files\Microsoft Office

  Then you can use a 3rd party freeware application called CCleaner to clean the registry!

  * Visit also the following: *.
  [How do I uninstall Office system 2007 if you cannot uninstall it by using Add / Remove Programs: http://support.microsoft.com/kb/928218]

  [Cannot uninstall Office 2007 beta of XP or Vista | http://www.tech-recipes.com/rx/1838/cannot_uninstall_office_2007_beta_xp_vista]

  Bye and good luck

• Built in camera Chicony USB no longer works on laptop Satellite A200

  All of a sudden, the built-in in my laptop Satellite A200 Chicony USB webcam has stopped working - it was going very well about 6 weeks ago, but now it's as if he has actually disappeared from the laptop. The camera does not even on devices such as equipment manager - there is no single category of imaging devices (unless I am also connected to our printer/scanner). It is also not displayed in 'scanners and cameras' folder in the control panel. But the software (Toshiba Camera Assistant software) is still there. Weird.

  When I start the computer first, or at other times try to start the camera, an error message appears that says:
  * "webcam driver open fail. Restart the computer or the camera. "

  Before you tell me to download and reinstall the drivers, let me tell you what I "ve tried so far:"
  1 restart the computer (obviously)
  2 downloaded the driver for my model on this site and variously has tried to repair, replace and finally uninstalled and reinstalled the. IT IS NOT THE DRIVER!
  3 unplugged my wireless USB mouse and restart the computer (I read on another thread that it sometimes interferes with the camera)
  4 tried to get the computer looking for new hardware - he couldn't find it.
  5 tried a system restore, where it was linked to a recent update - I tried this using three different restore points system, and none of them could not be completed.

  Help! necessary technical assistance
  Thank you

  All that you have done is just.

  In all this history it's strange this webcam is not listed in Device Manager.
  In my opinion, you should do a final test to check the operation of the equipment, if you want to install the OS by using recovery DVDs.

  With own factory and OS preinstalled settings, you can check the operation of the equipment and see if the cam will work or not.
  If the problem will be the same I'm almost sure it's related to the faulty webcam.

• Built in web cam stopped working - Satellite A200

  The webcam integrated on my Satellite A200 stopped working yesterday and I don t know why. I have not recently installed new software, but it is not recognized when I use Skype or any other program. When you try to use the camera, an error says no camera is recognized or it's off.

  I uninstalled the driver and reinstalled several times but it didn't help.
  Please, does anyone have any ideas? (Vista OS).

  Hello

  Sorry, but it is not easy to say what the problem is here. I recommend you to roll back OS to an earlier time using System Restore tool. I'm sure that you'll be able to reuse cam.

  I cam on P200 and use it with Skype without any problem. I really hopr you will be able to solve this problem.

  Good luck!

• Problem of camera Chicony after Vista Ultimate upgrade on the Satellite A200 - 1CZ PSAEC

  Hey all.

  I recently bought a Satellite A200-1CZ (PSAEC). It has Vista Home Premium preinstalled. But I wanted to be able to connect to my domain at work, so for this purpose, I had to upgrade to Vista Ultimate. The update itself went well, but after the upgrade, I can not the built-in Chicony webcam to work again. I tried to reinstall the software of the camera without success.

  I also tried to plug the driver installation to the place on the PC where the drivers. He says that it is indeed the correct drivers, but there could be missing a post in the INF file. It seems that it must be written specifically for ultimate.

  Anyone got a few other pilots or maybe a solution to this problem?

  -Dan

  Hi Dan

  Please don't be angry with me, but why you n t search here in the forum first?
  Advanced forum search is the option to find related discussions this topic.

  I found this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  Also, here is the solution to your problem
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  Greetings

• Driver for camera chicony 2.0 USB does not work with the Satellite A200

  The camera is built into the laptop. I tried to use the web camera and I can't.
  I tried to reinstall the driver but I can't find in the toshiba Web site downloads.
  There is no light in the camera, the software is ok, but I can't find the driver.

  Thank you

  I put t know what Satellite A200 series you and what OS you use, but the webcam software was already published on the European driver Toshiba page.

• Camera driver not found on Satellite A200-130 Vista

  In my new Satellite A200-130 (with built-in 1.3 m camera), impossible to find any software/driver of the camera installed.
  It presents Chicony USB 2.0 Camera in the device driver > imaging devices, but can't find the software anywhere shortcut in the start menu > programs as the user manual says.

  Help, please...

  Hello

  Check please in the taskbar near the time, he must have placed there camera assistant software icon. If you can find it please delete the mouse pointer on the side of the screen on the left and in the middle of the screen on the left side menu where you can start web cam application will generate.

  I checked on the P200, but it must be the same. This camera assistant software is also listed under start > all programs. I really don't understand how you can not find it on your A200 laptop.

• Satellite A200-08JC - software of the camera Chicony does not start

  I installed the correct drivers for my 08JC satellite A200 XP, but when I click the button start to run the software, it shows something loading for a few seconds, then stops. The camera does not illuminate and the display software that shows the view of the camera does not start: nothing happens.

  I searched around on Google for a solution, but other users having similar problems to the least get an error message to help. I have nothing like that.

  Does anyone have ideas that could help?

  And what dodey now?
  Driver installation doesn t help, you don't want to test the functionality of device with the settings you would expect now?
  A magical solution or what?

  Description of your model name is somewhat strange and A200-08JC is not known to me but overall Satellite A200 notebooks are WXP supported.
  Can you please post the model name for laptop again?

• Re: Satellite A200-28 cannot read the SD card of the digital camera

  Hello

  I just tried to get my laptop Satellite A200-28 to read my camera, an SD card and it happens in the card reader, but nothing happens.

  To what extent do you have to press or on my desktop, is not go very far before the card starts to blink and it opens the contents of the card. But on my laptop nothing.
  Just, it lets you put the card in but does not seem to realize is there actually.

  Any help on this would be much appreciated as it would be so great could receive laptop to read my camera card as easily as my office.

  Debbie

  :) Thanks for your comments buddy!
  Good to know that you resolved your own