Satellite A300-1NT is unable to connect to the mobile phone on BT

Similar Questions

• Satellite L510 - unable to connect to the mobile phone

  Hi, I have a question and hope to get a solution for everyone! I use Satellite L510 run with Windows vista but the problem is that I can't connect my bluetooth with nokia 5230!

  It can connect to the nokia 7610 and 7610 connect to 5230 also no problem. So I'm just wondering why the laptop can not pair with my 5230! Thank you!

  What error message do you have? What is the last message on the side of the phone before the error occurred?

• Unable to connect to the mobile phone with Bluetooth Stack

  I can not connect with my Samsung Omnia i900 using battery from Toshiba. It works when you use the microsoft stack, but I want to you use a toshiba software.

  Any suggiestions?

  What error message do you get?

• Unable to connect to my mobile phone

  Hi, I am trying to connect a sony ericsson W705 with my laptop but the service discovery failed!

  Who can help me?

  To connect the mobile phone to the laptop Toshiba is very simply.

  Click on the BT symbol with the right mouse button and choose the option Add a new connection
  Activate the BT on your cell phone and put it in visible mode
  Use the Express mode in the BT software and click NEXT

  Phone should be detected automatically and all you need to do is follow the menu on the phone and your laptop.

  When the connection is established you can transfer data from your phone to the laptop.
  A few minutes ago I tested it with my Qosmio X 300 and nine LG BL40.
  Works perfectly.

  Believe me, you don't need more than 2 minutes for this.
  Of course, don't forget BT on your laptop is properly enabled (FN + F8).

  Good bye

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them

• Satellite L505-12 q - unable to connect to the Wlan on Draft N Router

  Hello.

  I have a Toshiba Satellite L505-12 q who that I connect to router Edimax br 6524n.

  My problem is that when I connect to the router the laptop does not use n 802.11 g... The network card is Realtek RTL 8191se... He supports the project and it is configured to receive B G and N. When I set up the router to use only the band N the portable project sees the network, but when I try to conect it can not...

  Can someone tell me where is the problem?
  I updated the firmware on the router and adapter driver and still nothing good... :|

  Thank you.

  Post edited by: Matt1990

  Hello

  First you need to update the WLan driver.
  Here is a page with all the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  After that, go to Device Manager-> properties-> Advanced tab WLan card and check if the Draft N has been selected.

  Restart the device and then try again

• Satellite A660 - 11 M - unable to connect to the Windows Mobile 6.1 smartphone

  I can't connect my phone (sony ericsson experia x 1) to my Windows 7 laptop. When I'm connecting via toshiba bluetooth stack configuration, it shows me an error "connection was refused by the PAN Server [name of the my phone]. I tried to change some options in the bluetooth stack, but it has been unseccesfull.

  I'm sure that there is no problem with my phone, because I can connect at any time to Windows XP on the laptop of another.

  See the how-to document
  "How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone".
  http://APS2.toshiba-tro.de/KB0/HTD9602MW0000R01.htm
  It describes your problem, and proposes the following:

  Resolution:
  * Check if your Windows mobile phone is always connected to the internet.
  * Make the Internet sharing connection once again.

• Satellite A500/02U impossible to connect to the mobile phone using BT - defective service detection

  Hello

  I only got my phone a week but when I connect it to my sony phone ericson while see the phone try and pair it but keep "detection of defective service" coming...

  New phones also marks and connects to any bluetooth so his definitely this laptop. driver has only been installed so can't be that... feel that taking the laptop to the shop and have them repaired if I had energy... can anyone help with this?

  Thank you

  Eddie

  Before contacting someone trying to install the last stack of BT.
  Strange is that I found several threads in various forums on this subject, but always with the same mobile phones from Sony.
  If you have time check THIS interesting thread.

• Re: How to connect to the mobile phone via the com port

  Hello
  I have problem with connecting my Nokia n82 (s60) phone to bt via COM port. I want to connect mobiola webcam and need it. Can U help please?

  Hello

  Satellite A300 Vista preinstalled
  Battery Bluetooth version 6.10.07
  Motorola Razor V3 mobile phone

  Not the same mobile phone, but the principle is the same.
  Without doing anything special, I connected my phone to the laptop in a minute.

  Allow BT using FN + F8
  Open Bluetooth settings, click the BT symbol in the taskbar
  Click on new connection
  Select the Express Mode > mode activate Visible on laptop > click OK
  On the new connection wizard, choose phone list and click OK
  When offered choose security PIN (for example, 1234)
  Check connection on mobile phone and enter PIN security
  After the PIN CPM40 control port will be enabled

  Then now is your phone connected to your laptop and you can, for example, transfer files from the phone to the laptop.

  By the way: what model of laptop do you have and which version of battery Bluetooth?

• Publish with the connection to the mobile phone.

  I tried to connect my Droid X 2 phone with my laptop Asus U47A, running under Windows 7 64-bit via USB; However, the computer won't "recognize" the phone. I downloaded and installed (and reinstalled) the appropriate driver. I also checked all my USB ports and the cable worked correctly. I downloaded all the updates for my computer and restarted it so the phone several times. I also tried to connect with the phone in "USB debugging" mode. The phone works great with my XP desktop, but I need to work with my laptop. I can't determine what is the problem and have exhausted all my resources and remain unsuccessful. I'd appreciate any help and suggestions please.

  Alisha,

  Thank you for keeping us posted.

  I would have you see the support article more.

  http://support.Microsoft.com/kb/2654149

  We know if you need help.

• Re: Satellite L655-11 q - unable to connect to the Internet

  Help.

  Yesterday, I bought Toshiba Satellite L655-11 q, which comes with no os, I installed win7 32 bit and when I connect my modem (motorola sb5101) he doesn't recognize him at all and when I try to connect it reports error 651 (modem reported an error), I tried to install the modem driver, but it says that my phone is not an ethernet card (and I know that the ethernet connection requires a driver) and when I go on Device Manager, there is no modem there and it says my ethernet controller, card netword and PCI simple communication controller are missing.

  I have intalled a dozen different drivers, but without effect. It offers me to go online so that pilots can be recognized, but it's kind of ironic, because I can't.

  What can I do?

  Hello

  It seems that you have not installed the driver lan... http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download and install it

• Satellite U400 - 10 M: unable to connect to the HD TV with 1366 (1360) x 768 resolution

  Hello!

  I have a U400 - 10M (Intel x 3100, Vista), LCD TV Sharp 37GD8 (1366 x 768) and cable HDMI Supra (HF100).
  Try to connect to them. But where not necessary in "graphics properties", only 1280 x 1600 x and resolution 1920 x...

  Try to use PowerStrip, but it cannot add 1366 x 768 resolution list.

  Does anyone know how to make U400 work with 1366 (1360) x 768 resolution via HDMI?

  Hello

  I think that's not possible, because it seems that the graphics card does not support these resolutions.

  You visit the user manual what external resolution are supported!

  Welcome them

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• Satellite Pro L50 - B - unable to connect at 5 GHz Wi - Fi

  Hello

  I just bought a new Satellite Pro L50 - B and it is unable to connect to the wifi of my company 5 GHz network. It connects well to the 2.4 GHz network, but poor performance on network thaat there.

  Is it possible to get the L50 - B to work in the 5 GHz range?

  Thank you

  Martin

  Frequency of 5 GHz is supported by 802.11 A and 802.11 N
  But if the WLan module is not compatible 802.11 A, then the standard 802.11 N will operate at 2.4 Ghz

  The question is: what are the standards WLan are supported by the integrated WLan module?

  Which module WLan is integrated?