Satellite A300-276 - nvraid.sys error at startup of Windows

Similar Questions

• Satellite A300 - CEC_MAIN. EXE error at startup

  Hello, I have a Toshiba Satellite A300 network and when I run Windows Vista and the error message is displayed. This error is cec_main.exe.

  I have remove the camera assistant software and restart the computer, restart when Windows the message not to apears. I have install the camera assistant software, and this error again.

  Does anyone have the solution?

  Hello

  The CEC_MAIN. EXE application belongs to the software of the camera, and if you have already tried to reinstall, you should check your firewall and security software.
  I think that your security software is blocking this application in order to check this!

  If it doesn't work remove the software and reboot the laptop. Use CCleaner to clean the system and reboot once again. After that, install the latest software for the Toshiba page.

  Welcome them

• Satellite L300 - Disk.sys error at startup of Windows

  I got my recovery disc today in it and after a few reboots, I managed to get the Advanced menu F8. I chose the Mode option safe mode with command prompt. The window started to load windows drivers etc.. It has now ceased on the line of code with a wait if you please and has been like this for more than 2 hours.

  Support: \windows\system32\drivers\disk.sys

  I booted in VGA mode even
  I haven't tried last good configuration known no joy.

  It is obvious that I have a bad driver how to interrupt command prompt and run chdisk or search for the corrupted drivers etc what remains for me to do.
  If I have to reload the OS it is downloadable from microsoft or is it paid.

  If anyone has any new ideas, I would be very grateful this sorting was needed.

  Thank you

  Franco

  Hey,.

  For me it s does not clear why you try to enter safe mode and why you should get a driver issue after you have installed Windows recovery disk Toshiba. Sorry, but I don t understand this.

  You can remove a driver without safe mode too. Also try SafeMode only. This means that without just the SafeMode command prompt.

  > If I have to reload the OS it is downloadable from microsoft or is it paid.
  You can reinstall Windows Toshiba Recovery disk

• Satellite A300-276 - Webcam driver open fail

  Hello!

  I need someone to help me.

  I have a Toshiba Satellite A300-276 with integrated webcam.
  The operating system that came when it was purchased windows vista, but lately for some reasons, had to format and then took the time to install win 7 (32-bit).

  But the webcam is not working.
  The program, readers and does not work.
  When I click on to connect to the web a warning appears saying + "driver Open Webcam fail." Restart camera or computer + «...»
  I rebooted, uninstalled and went back to install and does not work!

  Does anyone have an idea how to solve this problem?

  Thank you.

  Hello

  It is a typical software problem
  I read a lot of discussion on this error message and in most cases, new installation/update driver does the job!

  Please ensure that you use the latest version of the BIOS.
  Go to the Device Manager, then go to imaging devices.
  You can find the USB video device it's plays.

  This remove from the Device Manager list. Alternatively, you can uninstall the driver
  Restart the device, and then try to install the driver again

  Please make sure you use the latest webcam software... you can choose the published software for Satellite L500 too!

• Satellite A300-276 - requires BIOS password

  Hello, recently I have acquired a Satellite A300-276 with insydeh2o BIOS.

  The BIOS Setup asks for password to access. I tried some stuff, like shorthing b500 (it clears cmos, but it does not remove the password). Also updated the version of the bios to the latest version on csd (2.2). I can always start, I am not able to configure it.

  After that, I started to have a new problem (guess it was because ive cleared cmos, but I did not configured(default setup).) The power light, never off, only if remove battery/ac

  An idea for my new problem? I can live with the other
  hope you guys can help me
  see you soon

  Hello

  Regarding the BIOS, I recommend reading this article:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=11

  And which are still lit after you have turned off the laptop? Battery LED and the adapter is always on if AC/DC adapter is connected, but if you disconnect all the LEDs must be off same battery is installed.

• RunDLL error on startup of Windows 7 - specified module could not be found

  I get up RunDLL error at startup of Windows 7. The message reads ' there was a problem starting C:\Users\Tom\AppData\Local\Temp\186192434.txt the specified module could not be found.

  Then use msconfig to identify the startup entry problem

• "Start PXE on IPv4" error at startup on Windows 8 LO

  "Start PXE on IPv4" error at startup on Windows 8

  LO

  Salvation Hong,

  Thanks for posting your query to the Microsoft forum. I will certainly help you in this matter.

  The information that you have provided are not enough for us to decide the issue. Please provide us with more information.

  1. What is the brand and model of your computer?
  2. You did any hardware/software changes to your computer before the show?
  3. Your computer is connected to the domain?

  Runtime environment of seed (PXE), pronounced as "Goblin", allows computers to boot remotely via a network interface. PXE allows a client computer to boot from a server independent hard drives and installed the operating system.

  This occurs generally when the BIOS setting are changed or if PXE is not supported by the BIOS of the computer.

  I suggest you to contact the manufacturer of your computer to check the BIOS settings.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I would be grateful if you can provide us with the screenshot of the window to help you.

  Please refer to the article below, how to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Please post back with the results and the information requested, we will be happy to help you further.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• Impossible to use my Satellite A300 again because of password at startup

  I just bought the Satellite A300 - 15 M today after installing things... He did this by itself now when I restarted the laptop it says enter password but I n t put any password.

  Any help please...

  Hello

  What kind of password? Password BIOS or Vista password?

• Satellite A300-1QD - two questions during the installation of windows XP or Vista

  Nice day
  Here's my problem:

  1. I just bought the Toshiba Satellite A300-1QD and since there is Vista based on it and I have Vista ultimate, I decided to install on the laptop.
  After I formatted deleated everything and I have the partition that I created a new.
  After that I installed Vista, now I'm at the point where it says complete installation and the blow bar is at about 2/3.
  My problem now is that it's now been 3 hours and nothing happens the dots next to the 'installation complete' is still occurring and disappearing.

  2 as the number one lasted so long I decided to install windows XP Professional, but when it loads after that I put the cd one has bluscreen place called chkdsk.

  What should I do now to get something on what works?

  Hello. I think that the partition table and boot loader are messed up and it's your problem. You can try to chek to find errors and format your HARD disk with a third parity tool and try to install windows again.

• Satellite A300 PSAG4E - multimedia keys do not work on Windows XP

  Hello

  I have a Toshiba Satellite A300, model PSAG4E. I installed all the utilities of the shortcut key that I could find the drivers, but the multimedia keys download page don't wok.

  Can someone help me?

  Hi ElMonoHervido
  Make sure you have all the drivers installed (to download on the website of toshiba pls)
  You must also install:
  -common modules
  -utilities

  After the reboot it should work as you wish.

• Satellite A300-1J1 - sound doesn't work only with Windows XP

  I have a problem, yesterday I installed on my Toshiba Satellite A300 1J1 WindowXP, but no sound!

  I tried all sound driver Toshiba on the Toshiba web site but no result!
  Some can help us?

  Hello

  Your laptop is a Realtek audio chip. If you install a Microsoft hotfix before installing the drivers.

  Check out these links:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  Welcome them

• Re: Satellite A300-20F - cannot find the hardware installation for Windows XP

  Hello

  I can't find hardware configuration (Satellite A300-20F) for Windows XP in the drivers download section.
  Someone at - it? Please give me a link.
  THX.

  Sorry for my English, I'm form Poland: P

  Hey Buddy,

  You must download the Toshiba Utilities. It seems that HWsetup is part of it, you can read in the description:
  + This program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel. In Control Panel, select the icon Configuration HW TOSHIBA. +

  You can download it from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite A300 - taskbar of service no longer appear on Windows 7

  I have the problem with the FN key. It worked when the operating system is vista, but after that I upgraded my operating system to Windows 7 the bar task which should appear at the top of the screen when I press FN low does ' t appear!

  So, can you tell me how I can solve this problem, please?

  My laptop is Satellite A300-29N

  Hello

  I had the same problem after upgrade to Windows 7, but the solution is quite simple: I searched a bit here in the forum and based on to install the most recent Toshiba value added Package.

  You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!