Satellite A300-y00 come with s-video output port?

Similar Questions

• Satellite A300/Y00 - connect to the Plasma TV?

  Is it possible that my satellite A300/Y00 to connect to my plasma 50 inches, if so, what cable should I buy?

  THX

  Hey Buddy,

  Why it would not be possible?

  Satellite A300 and all Plasma/LCD TVs are generally equipped with HDMI port. So just buy a HDMI to connect your laptop and TV cable.
  HDMI cable transfers audio and video signals so only one cable is needed.

  Lastly but not the least of using FN + F5 secret key you can switch between monitors. :)

• Need drivers Vista for Satellite A300-Y00

  Does anyone know list of driver Toshiba Satellite A300-y00? How I check it?

  I want to download Vista ultimate, but I don't know which driver was installed in a300/y00...

  Help would be appreciated

  Thank you

  Hello

  It seems that Satellite A300-y00 is an Australian series for Toshiba laptop.
  I put t know what series it is, but you can check at the bottom of the unit.
  There must be a model number; something with the PA.

  Check this box and choose this model of laptop on the Australian driver Toshiba page.
  There are some Vista drivers.
  [Toshiba driver Australian Center download | http://www.isd.toshiba.com.au/71/live.dll/topic/content/driver_search.jsp?]

  Welcome them

• Satellite A300-Y00 - how to use a joystick for games?

  How can I connect my Satellite A300/y00 with joystick so I can play without a keyboard because its very difficult to use?

  What one should I get, like joystick ps2 or gamepad xbox since the microsoft xbox and im using microsoft software such vista...?
  But my laptop has what we call the game controller in the Control Panel, it means that I always install the software to use the joystick?

  Thanx

  It s your choice what joystick you want to buy. Go to a computer store and take a look at all the joysticks and buy one of them.

  Normally you need a driver for the joystick, but the joystick should be bundled with an installation disk that contains the drivers.

  Good luck!

• Can I send by Satellite A300-y00 for the recovery procedure

  I had the problem in my Satellite A300-y00, which are viruses, trojan or more than threats.
  I would like to ask if it is possible to refer to Toshiba to reformat with a new new?
  I mean will they install the same software with everything as a new included in order to remove all the threats.

  It will cost more?

  Hello

  As I m not wrong not the A300 was equipped with HARD drive recovery option.
  This means that you can grab the laptop and set it to factory settings very easy and without use of the Recovery DVD!

  Then turn on the laptop, press the F8 key and choose the option called fix my computer.
  Then, a new screen should appear and you need to choose the last option called Toshiba Recovery or something like that.
  Then follow the instructions on the screen.

  The whole HARD drive must be formatted and new operating system with all the drivers must be installed

• Satellite 1135-S1553 without S-Video output Port - how to connect a TV

  I have a portable Satellite 1135-S1553, how to connect it to the TV without having the S-video output Port in my laptop?

  Are you sure that your computer laptop doesn t support port s-video OUTPUT to 100%?
  According to [this page | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_tourView.jsp?moid=434998&rpn=PS113U&ct=PT&so id = 660059] portable Saturday 1153-S1553 supports this port at the rear.

• Satellite A300-Y00 black screen but the fan from

  I bought a TOSHIBA satellite A300/Y00 in June 2008 – 16 months. Model number PSAGOA-02Y. After ten months he did not start suddenly. It sounds like the processor and the fan starts but the screen and the led underneath the screen was all black. I tried to connect it to an external monitor, but the screen was too black. I gave her to Toshiba for 2 weeks (!) who said it was the motherboard. They replaced for free that it was still under warranty.

  A few weeks ago the same thing happened again. I turned off it and for some reason at random, he started as usual a few hours later. I called Toshiba to say that, in my view, that computer will crash soon again. They said that they will be able to take it in for service, but if they could not find anything wrong with it that they would charge me $ x. I don't give him service. I even went to a local Toshiba support guy who said that he couldn't find anything wrong with my computer and that there nothing that could do.

  Now the same thing is happening again. This time I can't do it again. Of course their fantastic 3 months for the last motherboard warranty has expired. I tried to take out the battery and start it only to the power, but it does not help.

  I don't want to pay $500 for a new motherboard, and then drop it again. It is obvious that it is a hardware problem and I think that Toshiba should replace my computer free of charge.

  Anyone with similar problems? Any advice? Get pretty annoyed...

  Hello!

  Have you ever contacted again authorized service provider? If this is not the case, do please! You should talk about it again with technicians and then you will see what they can do for you.

  I can understand that it is irritated, but these things can happen and I think that the ASP will be best for you help you. To be honest, I have good experience with my ASP. The repair goes very fast and the technicians are very friendly and knowledgeable. It of always nice to talk a bit with them.

  I m not a technician, but maybe they can fix it as a gesture of good will or if you only have to pay the motherboard and not Exchange

  Welcome them

• How to partition Satellite A300 - 21 H with Vista?

  Hello
  I have a Toshiba Satellite A300 - 21 H with Vista and dual you want to boot with ubuntu linux. At present, there are three partitions, recovery vista 1.5 GB, 150 GB C and 150 GB E (with recovery of HARD drive inside). My ubuntu, I would like to partitions / and / Home (about 150 GB). Should I delete the partition E? I have my recovery DVD's...

  What is the best approach, I think that linux is only 4 partitions.

  > Should I delete the partition E?
  If you created the recovery DVDs, you can remove HDDRecovery and use the second partition for Linux. When you want to install once again just use recovery media created Vista.

  If you change the structure of the partition, no doubt, you will not be able to use saved image in this folder.

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them

• Satellite A300 - 06H 019 - special edition video updated

  Hi all

  I have a question on my laptop, there a HD3470 256 MB mxm II video card it's a 64-bit memory interface
  I want to level to a card 9600 m GT 512 MB mxm II is a 128 bit
  What I know for sure, is that the A300-o2c019 has a 128-bit of 3650 witch I guess mine can handle the 9600 m gt
  The 9600 m gt uses 20 watts and the 3650 35 watts so I said, but am not sure about the 3470 on how many watts it uses.

  So in the end is it safe to use the 9600 m gt in my Satellite A300 - 06 H 019?

  Thanks for reading

  Chris

  Before starting to discuss verification of GPU upgrade please follow document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Satellite L505 - it come with disc of Windows 7 64 bit or 32 bit?

  I had a computer Satellite L505 with * preinstalled * version Windows 7 64-bit and a 32-bit product recovery disc. I didn't create a backup of a 64-bit version and reinstalled the system since the provided 32-bit recovery disc erase my HD. However, I would like to reinstall the verision of 64-bit Windows 7. I know I can order a backup media on https://backupmedia.toshiba.eu/ but it says not version (64-bit or 32-bit) wich are mailed directly to me.

  If I check the description of the model on the Toshiba page, it says that it comes with the 64-bit version and includes the 32-bit recovery disc. This description still leaves me a question what backup media I'd get Toshiba. I have to be sure that I get the 64-bit WIndows 7 until I have order a.

  I'd appreciate a confimation. Thank you!

  Hey Buddy,

  I think everything is ok and there is no open question. The description on the Toshiba site says it all: the laptop comes with the 64-bit Windows 7 version, which means that this version is preinstalled on your computer. Additional, you get a version 32-bit on a recovery disc and that s all!

  So you didn't burn the 64-bit recovery disc, which means you must order a new one from Toshiba. I guess you will get versions then 32-bit and 64-bit.

• Satellite A300-1EG - dead with the graphic card pixel problems

  Hello

  Not after two months of use of a brand new Toshiba A300, I had a dead pixel.
  Its only I guess, but what intrigues me is that it could be somehow merged with disorders, that I got with my graphics card.
  I had trobule with S-video use, there was a bad image, without collors.
  Is there a chance that I can have my screen replaced?

  Im still under warranty.

  Thank you

  Hello

  Regarding the dead pixel:
  > Is there a chance that I can have my screen replaced?
  I doubt that the screen would be replaced only due to a dead pixel.

  Please check out this article from Toshiba. I found it in the page of knowledge base of Toshiba.

  + What is the maximum number and type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels? +
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  You will find details of the maximum acceptable number of holes per 1 million pixels.

• Satellite P300D - no image through S-video output

  Hello!

  I can't image through my S-video output to the TV. VGA and HDMI works fine, but my TV is old and I don't have that kind of input to TV.
  The laptop recognizes TV on cable, but I can't go from a primary and secondary display.

  (satellite P300D - 12L)

  Hi bgjerg,

  Usually you can pass to your TV by using the FN + F5 key combination.
  More if you use the S-video output, you can set parameters in the display driver. There, you can choose between NTSC and PAL. It s on your TV depending on what setting you need.

  Check this box!

• Satellite A300-202 - problems with alternating current

  Hello

  I bought a Satellite A300-202 a few months ago and I'm having intermittent problems with alternating current.

  Sometimes I plug the AC power and it does not start (the led are off and windows says that it is on battery) charge. Other times, he is in charge and suddenly stops.

  I suspected it might be the cord broken inside, but it seems to happen also when no one touches it. Usually, when it stops to load, I unplug the wall, wait a few seconds and plug in again, and it starts to load correctly never stop again.

  Someone at - it had a similar problem? I wonder if is it possible to just replace the parts to AC power so I won't have to send the laptop for repair.

  Thank you

  Pedro

  Hello

  I've never had a problem with my Toshiba Chargers but an old non - Toshiba power adapter died after 6 months of use. After the replacement, it works without any problem.

  I think you should check the update of the BIOS as mentioned by Akuma, but for me, it looks more like a problem with the AC adapter.
  So if the BIOS update help t doesn't, the adapter should be checked permanently.

• Satellite M30: black and white TV with S-video output

  I have a M30 bought in the United Kingdom currently I am in the United States
  When I try to connect my M30 to my TV via a RGB cable, it works very well but failed to get a similar result via S-video. The image is black and white and very fragile.

  Is it to do with the fact that the standards of television in the United Kingdom and the United States are different (PAL or NTSC) or is this something else?

  Can you recommend how can I change the output format of the S-video signal?

  Thanx

  MR. M.

  Hello

  The fact is that U.S. NTSC standard and it can be the reason for this, but if you use connection S-Video S-video port on the TV must be turned on. If not, the image can be produced in black and white.