Wireless printing fails, cable printing

Similar Questions

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• 8600 HP all-in-one more: 8600 wireless printer can accept dynamic address of the cable mode, / router?

  Got new Suddenlink cable modem/wireless router that uses dynamic addresses - only but the 8600 all-in-one printer uses static-how to to get wireless printing? The printer can be reconfigured to accept dynamic? How?

  Thank you

  Yes, it can, information in your printer manual. You can reset the network for DHCP settings. In addition, your router supports IP static. You just need to configure it. Info is in the router manual or call them.

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Help, please. Not detected HP Desktop F4500 wireless printer same w/a usb cable

  My wireless printer has a mind of its own. When I got it, it printed... wireless. My router freaked out & did not work, so I unplugged my router & used my dsl cable to my laptop to connect. I tried to plug the usb cable from my printer to my laptop so I can use it & it didn't work. I brought my printer at the show & restarted my laptop... it worked w / the USB for a day. I got a new router and now my printer is not working yet. RAWR! Help, please. I don't know what to do. It is not work w / or w/o a cable. I've restarted both, but nothing. Thank you all ;-D

  Unplug the USB cable from the laptop, then remove the icons of printer to the printer from your laptop too. Now click on the Menu start > all programs > HP > HP Deskjet F4500 > add a device. Now follow the instructions to reconfigure the printer to connect to your new network. You must connect the USB cable between the laptop and printer ONLY when you are prompted to do so and not before it.

• HP 4500 wireless printer: printer all-in-one cannot scan glass

  My hp 4500 wireless printer worked fine until it just stopped printing.  I reintstalled the original installation disk and printing has been repaired.  However, the desktop icon for the hp Solution Center, which allows scanning of computer files, has not been activated, and accordingly, I am unable to scan from glass.

  New driver from HP site could not install completely and still have the same problem.  I tried to reinstall the existing drive, and it is still able to print, but still can not sweep.  The desktop icon is always off.  Didn't test the fax.

  I have here an updated driver that contains the implementation complete for the 4500 Wireless: G510n-z

  My system is Windows 7 64 bit.

  Please answer.

  Hello @rudetom,

  I would like to see if I can help you get your Officejet 4500 Wireless software working again.

  Looks like pieces of old software is causing the installation to fail. I would like to clean at the far (unisntall) and try again.

  When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software. * If you are connected with a USB cable, be sure to unplug it.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available.

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper windows and then show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

  For more information, see device for Windows 7 Manager information.

  Once you have removed everything, I restart your computer and then try to download the new software again to HP Officejet 4500 Wireless - G510n full feature software and driver.

  If you still have problems, please let me know what kind of error you get and how your printer is connected to your computer. What is direct installation USB or wireless?

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• wanted: want to wireless printer

  Want connected to WI - Fi. Printer HP e609n connected to the Wi - Fi range. Envy doesn't recognize wireless for printer software. It's the detrmination after 2 hours on the phone with HP support printer. Printer works with cable. Failed to contact HP support. Everything I click on the support page sends me in a loop.

  Hi @bajaskier,

  Welcome to the HP Forums!

  I understand that your HP Officejet 6000 wireless printer won't connect wirelessly to your Windows 8.1. I'm happy to help you with this problem of connection!

  I would like to begin browsing through this guide, set up the printer to a wireless network in Windows for the HP Officejet 6000 printer.

  If you can print a Network Configuration Page, do you see something that failed on the report?

  Let's start with that, and we'll go from there!

• Connect a wireless printer anywhere, wired derivation convert, does not have radio, add WPA2 security.

  Update- good because when the wireless radio failed to convert a wired Ethernet printer to wireless technology, or if you want your printer to support greater security WPA2 wireless.

  Updated - connect to a hotel/motel/school dormitory may not work if the network uses Enterprise authentication requesting a user name and password on your computer.

  This article will try to explain how to connect your wireless devices, including printers, to a wireless network when you are away from home.  The problem when you're in a hotel, motel, room student or other areas is your computer connects fine, but your wireless printer, you have brought with you, has connection/security problems.  Other people/wireless devices can find the printer on an open network, connect you to the printer and start printing without reason just because 'they can do. "

  You'll need is a small wireless travel router.  TP-LINK TL-WR702N Wireless N Nano router or other router of trip is all you need.  The WR702N is available on eBay or Amazon for only $21.00, that's right, only $ 21.

  This device does not support the authentication of company systems because it cannot meet any username and password prompts these system as your computer can.  However, it will connect to a standard WPA SSID and your computer, but if you receive a browser for other questions page redirect, it won't work.

  It's a small powerful travel router which built in 5 modes of operation (more than your home router can do):

  1. AP mode
  2. Client mode
  3. Repeater mode
  4. Router mode
  5. Bridge mode

  The TP-WR702N information is found here:

  http://www.TP-link.com/en/products/details/?model=TL-WR702N#over

  To see the overview of applications see here first to understand:

  http://www.TP-link.com/en/products/details/?model=TL-WR702N#app

  I won't go into the details on how to configure these modes in the TP Link router Nano as the manual does a great job.  One thing you must remember is that you must assign a static IP address on your wired Ethernet connection of computers to access the Web interface internal of the Nano.  The Nano is configured with an Ethernet cable at any time.  It's security that the router that has DHCP disabled so if you connect to a network, you won't crash it with an IP address conflict.  The Nano is powered by a USB cable and comes with a USB AC adapter too.

  The IP address of the Nano is default 192.168.0.254.  Set your computers Ethernet Port, adapter not wireless, a static IP 192.168.0.1, 255.255.255.0 DNS address.  You have to find a way to do it yourself, but it is explained in the manual and on the web for the operating system of your computer.

  This leaves your wired Ethernet connection to a static IP address and your adapter wireless DHCP.  Don't forget to put your wired to DHCP if you need to use it later for a wired connection.  Connect the Ethernet cable from your computer to the router Nano.

  Set up your browser by going to 192.168.0.254 (Nano IP address) in the address bar and you'll get the username and password login screen.  The default username and password is admin/admin, you can change it if necessary.

  Set the Nano bridged mode:

  Other modes will be mentioned later but for now; Bridge mode will serve as this isolates and creates your own SSID private the hotel/motel/dorm room open wireless network SSID.  In Bridge Mode you entrance and connect to the Rangoon SSID (paraphrasing) AND set up your own small network with your own SSID and password.  Your SSID will be separated and protected through WPA2-AES security that you set up.   You will be able to go online normally fine, but all of your devices will now connect to your private SSID.

  Example:

  Hotel SSID: HILTON Hotel Paraphrase and password: GUEST

  Nano SSID: MYNETWORK Nano Paraphrase/password: HP5514

  With this information, the rest is easy.  You set your SSID private and password first, they you must find and connect to the SSID and password hotels.  Simply click on the SURVEY button and a list of all available networks will be displayed along with their MAC addresses.  Find the network SSID, you want to connect (bridge) too and click on "connect".  Information is entered automatically.  I suggest that you also edit your channel wireless on a fixed channel as the 1, 6 or 11, never 'auto '.

  Save your settings and you will be told to restart the router.  Follow the instructions and always restart the router after any changes take effect.  This Nano restarts in 20 seconds approximately.

  Now on your computer when you scan available networks, you will see MYNETWORK.  Connect your computer to the SSID and enter your HP5514 password and you're on!  Start surfing or something else.

  Now, what about your printer?  The printer must be set to DHCP and assuming that you have a printer wireless with front panel:

  1. Go to (Assistant) wireless configuration screen.
  2. Search for available networks.
  3. Select: MYNETWORK
  4. Enter your password: HP5514
  5. To connect!

  In about 15 seconds, you're connected!   Oh, guess what?  The Nano has a WAN/LAN port and in Bridge mode, it is a LAN port that is connected to your network too!  Then plug into a printer/computer Ethernet cable, if you wish.

  Your printer will work as usual with no change at all.  I set up in my house to test and it connected perfectly to my HP5514 wireless printer.  All the tools, diagnostics, printer functions, alerts of ink were normal.

  You're done!

  The bottom can be used anywhere to create a local private network so that you and others can use your printer.

  Now, what about the changes?  If at home, you can use the Nano in Repeater mode to connect to your own network and extend the reach of all devices.  Even as the Bridge mode, but you're on your network using your SSID and the word normal, so everyone can use the printer.

  Don't worry what you heard with speed of execution of a router in Repeater Mode.  Most routers House when running in wireless Repeater mode should be set to no encryption or WEP only.  Here max speed is 54 Mbps.  This Nano turns at full speed of 150 Mbps in these modes, using the highest security WPA2-AES (personal).

  Remember that the size is small, so it's good to perhaps more than 50 feet.  HD video streaming was impeccable and surf watch video at the same time was perfect.

  I hope this help you when business or vacation.  Some hotels charge for EACH device connection.  With the implementation above, it takes only a charge for multiple devices, such as cell phones, iPads, light fires, computers or anything else you want to connect.

  EDIT - do not forget that this Nano device has an Ethernet connection that once configured, you can use to connect a wired computer or wired Ethernet printer.  It is a good radio your printer wireless doesn't have to convert a wired Ethernet wireless printer or if you want your printer to support greater security WPA2 wireless.

  Have fun!

  Read here on how to connect your printer to a network asking for additional security and information (username and password).

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-to-connect-your-wireless-printer-to-a-network-requesting/TD-p/4468642

  Most likely, you won't be able to connect.

• DeskJet 1112: wireless printing

  I bought HP DeskJet 1112, which is advertised as a wireless printer. I don't know how to do wireless. I installed it as it is written, but the software in the CD provided and that in the HP site is 1110 series.  Whwn I unplug the cable USB of the PC does not see the printer. Maybe I am not doing correctly.  Is it really wireless?

  Thank you

  The specification for 1112 Deskjet says that it is * not * capable wireless, see here.

  HP ePrint connectivity capacity

  • NO.

  Mobile printing capability

  • NO.

  WiFi functionality

  • NO.

  Connectivity, standard

  • 1 USB 2.0 PORT

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.

• Mac Book Pro and HP Envy 110F wireless printing problems

  I got my Mac book Pro for Christmas 2013 and initially had no problem printing wireless to my HP Envy 110F, but for some reason, I keep getting problems with printing to the envy of 110. We don't have printing problems with our Ipad for this printer.

  I can connect the printer to my Mac book Pro by putting 192.168.1.72 IP address in a web browser, but I get on the symbol bit offline when I print the urge. Last night I reinstalled the printer to print wireless on my mac pro book using a printer cable, which then worked well, but today the same problem reappeared.

  I'm starting to think that the problem may have started with the latest version of the update of the operating system to the Mavericks 10.9.4.

  All thoughts welcome.

  Hi @UKCheshire

  Since you are able to print from the iPad to the wireless printer, I suspect you have to something. I think that the question has something to do with the communication between the printer and the computer and not between the printer and the router. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X.

  If the problem persists, do not give up hope, let me know and we will work through it together.

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Could not get either of my PC to see my wireless printer

  Wireless printing

  I have a HP Pavilion desktop computer, a g7-2118nr Pavilion laptop and an HP Photosmart D110 printer. Teo computers and the printer are connected to my wireless router. I can't believe one of them to recognize the printer. So nothing will be printed. It works very well with the Deaktop if I cable to connect the two. Ideas please?

  If you have installed the full driver package, click Start > all programs > HP > HP Photosmart D110 printer (or whatever your folder) and search for 'Connect a new printer' or 'printer and installation software' (which will have a selection of "Connect new printer" inside). Click on that and let it search for your network. If it does not, you will be asked to connect the printer temporarily by a USB cable. Do it and follow the prompts. The installation program will tell you when to disconnect the USB cable, and then it should work perfectly.

  SC Tom

• My advent AW10 WIRELESS printer does not print

  MY ADVENT AW10 wireless printer does not print, I reloaders disk but it makes no difference. Help!

  Hi brianshaer,

  1. the printer works when it is wired?
  2. what operating system do you use?
  3. do you get an error message?

  Method 1
  I suggest you try the steps from the following link and see if that helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-in/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-print

  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

  Method 2
  If the steps above fail, I suggest you try to print to the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Cannot print; have installed a lexmark wireless printer 9300 series

  Cannot print; have installed lexmark 9300 series wireless printer; Initially he printed the test page, but now all the print jobs are waiting in the Printers folder & cannot get anything to print or even delete.  HELP PLEASE!

  Hello

  · You receive an error message or error code when you try to print?

  I suggest you to follow the steps from the link below and check if it helps: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  You can also access the Lexmark support site: "Communication not available" or "Document failed to print" Error Message and the Print Job will hold in the print queue: http://support.lexmark.com/index?page=content&id=SO4473&locale=EN&userlocale=EN_US