Satellite A60 - avi2dvag error
I have laptop Satellite A60 series. It gives me an error with this file and my works is lost suddenly. Some physical memory dump begins. any suggestions what do I do?
Hello
For me, it looks like the graphics driver to malfunction.
Please download the most recent driver graphic of the Toshiba download page and reinstall the driver.
Tags: Toshiba
Similar Questions
-
Satellite A60-102: error with an autodesk autocad 2006
Hi all;
Autodesk autocad 2006, I installed on my computer laptop satellite SA60-102, but it did not run and it displays an error saying 'DBX CASE 0' with 'ok', although I installed it on my desktop pc and it worked very well.I need your help ASAP
Naim KobaissyHello
Connection to the website http://www.cadchat.com/forums/lofiversion/index.php/t2443.html
You may become Information for the (CASE of DBX 0) problem with AutoCAD 2006. It is a Site of cat Cad.By
-
Satellite A60 Power Saver error
Hi all, I have a Satellite A60 and I get the following error at startup. "" Power of Eve A fatal error has occurred that program will be terminated code ox2. Several times while it is connected my laptop turns off and to continue I need to connect again from the beginning up to. Can someone please help with a solution. Thank you, Mark.
Hi Mark
The only thing you can try is to remove the energy saver and try to install it again. It is also possible that it will not help as there are entries in the registry. If there is no problem for you the best way is to reinstall the unit with recovery CD. After that it works again.
In my opinion, it is not easy to repair some specific tools such as energy saving.
-
Satellite A60: Powersaver won't start no-error 0x7E
I tried to install the powesaver for my satellite A60. I downloaded the driver from the Toshiba website.
The installation went well until the end. The following error (fatal) is currently showed: 0x7E. The powersaver does not start.
Also it's unpossible remove the powersaver.Tanks, Brigitte
Hello
I found some similar problem with the same error powersaver questions.
Please check out some of these positions:http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=765&MessageID=1640#1640
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7334&MessageID=25354#25354
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6727&MessageID=23243#23243
Good bye
-
Satellite A60-174: system32\drivers\isapnp.sys error
Hello
After several nights and using Recovery CD e try my Satellite A60 will not work. Even though I cleaned it and cables everything is new.
I got this error: system32\drivers\isapnp.sysI installed the HDD in another laptop and works very well. If I bring the disk for Satellite A60 I still get this error.
OR Toshi stays to the debugger DLL when I try to install another version of win XP Pro.
I think that the RAM or something in the motherboard is broken. Can I change the RAM from the motherboard?
It would help if I add little ram additional RAM slot?
(I use only the RAM stock because it is on the motherboard.
any idea what may be this system32\drivers\isapnp.sys.It is said to start the laptop with Win XP cd original and try with a R.
Well, this back do NOT work in this laptop.
I can't come to the screen of Windows XP. The laptop will break the instalation before that!Konstantin
Hello
See this Microsoft Knowledge base article:
http://support.Microsoft.com/?kbid=315311I also read that if the new facility does not resolve the isapnp.sys question then maybe it is a failure of module memory.
Try to remove the module and test it with another.Check this similar subject announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11602&MessageID=52873 -
Satellite A60 USB Driver issue - 28 error code
I have a laptop satellite A60. I had a crash of the system due to problems of graphics card and had to reinstall windows xp pro etc...
Now, I unplugged my USB2.0 hub to go sit somewhere else in the House. The day after that when I plugged in the rear hub, it gave an error code 28, saying that the software required to install the device is not found... And the hub does not work. Now, it's the same story with my sm-buscontroller...
The hub has its own power suplly and I am running Windows XP Pro with SP2.
Hello
Code 28 means that no drivers are installed and you need to install the correct drivers.
Please choose the device (USB hub) and reinstall the driver of this source C:\windows\system32 -
Error on the screen and blue ati2dvag.dll - Satellite A60-122
Hello
I have problems with the ati device driver. I have ati mobility radeon 7000 igp and it keeps send me errors. Either the monitor turns blue, warning of the problem caused by ati2dvag.dll and said it caused a loop infinit or resolution of the screen turns into 16 bits and the mouse becomes very slow.
When I send the error report, tells using windows to look for a driver updated in windows update, but there is not.
I also noticed that the laptop overheats and sometimes, especially when I look at DVD turns off by itself. I don't know if these problems are related in some way, but they are certainly my only issues with my laptop.
Thank you
IsabelToshiba Satellite A60-122
Try to connect the external monitor, and please use the FN + F5 keyboard shortcut.
Maybe you'll be able to see something on the screen.
If this isn't the case, using ASP is therefore absolutely essential. -
Satellite A60 - recovery disc won't start plus-disque no bootable error
Hello
I set the boot sequence to boot from the cd, but the message reads: no bootable disk.
I tried to open it with ghost, but looking for a password.
Toshiba Satellite A60.
Hello
First you will not be able to extract the ghost image file because it s set as you could see.
I put t know why you can't boot from the recovery CD Toshiba. But reasons could be:
-The CD is defective (zero, not more readable)
-You used a bad CD
-The CD/DVD drive can not handle this CD because of the lens of the laser drive old and faulty.Then you should check first if you can start on other Microsoft Windows CD to see if the CD/DVD drive is ok.
If it is ok, then there is a problem with your CD! -
Satellite A60: ATI graphics driver issue - Blue error screen
Hello
I have a satellite A60 and I've had it for a year, and now all of a sudden, I have frequent crashes. The blue screen of death was told it is caused by a driver not working not properly, namely an ATI driver.
Hello
The blue screen of death is usually due to a software problem or malfunction of the equipment. In your case, I recommend reinstall the graphics driver.
See the page of the Toshiba driver for updates.
If it doesn t help and the blue screen appears again and it would be very interesting to know the details of the blue screen, for example stop: xxxxxxCheck it out.
-
Satellite A60 and energy saving issues
Hello
I am facing a problem that drives me crazy. After I formatted my laptop and install Windows XP, I'm never able to install Toshiba Power Saver or any kind of Toshiba Utilities. Setup turns on, but after that, it displays an error message (sometimes just sound no message) and it stops.
To be more precise:
I use a Satellite A60-302, with extra addition of 256 MB of RAM. I formatted the C: partition and installed Windows XP Professional (I tried 3 different versions: right XP, XP with integrated SP1, XP with SP2 integrated; just to be sure if the problem was caused by service packs). Then I inserted the CD provided, put in place the ATI card, etc. its pilots respecting order but when it comes to saving energy, the nightmare starts.
I removed the RAM I added and tried the whole installation by the original Setup process, but no change... My hard drives are well checked for any kind of virus, and the installation process was done with the ethernet cable connected to offshore to prevent any possible intrusion.
Funny, I remember setting up Win XP Pro on this machine before 3 months no problem at all. The only significant change since that day is the update of the BIOS from 1.60 to 1.80.
Looks like a "common modules" error but it is not "common modules", on the CD or on the internet.
Finally, I must say that I can't use my recovery CD because it's Windows XP Home Edition in Turkish, but I use Windows XP Professional English provided by my employer.
Any help? I'll be delightened if someone could help me.
Post edited by: sunfury
Hi sunfury,.
I imagine you're nettled. But there must be a solution to your problem.
You are right. There is no common Modules for this machine. Usually the common Modules, all Toshiba tools depend on. It is the main module.
In your case, it is very important to use a specific order of installation. Normally, you must use the order of Installation set by Toshiba. You can find it on
http://support.toshiba-tro.de/tools/satellite/SA60/win-XP/install_xp_na_en.zip.But there is also another solution. I usually install on this path:
-OS
-chipset + display driver
-audio driver
-fix for... (all)
-one other drivers (modem, LAN etc..)When you want to install the tools of Toshiba try in this order:
-Power Sawer
-Init GST
-TOSHIBA Hotkey Utility
-TOSHIBA Hotkey Utility for display
-Other utilities
-TOSHIBA ConsoleIf you want to install SP2, maybe it will be better to do it later. It is also possible that some of the tools after installation of SP2 will not function properly.
http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zipIf you still have problems made me know.
Good luck!
-
Satellite A60: Unable to connect to the internet via a modem - no dial-up
In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.
Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
The driver is asyncmac.sys = MS Access Remote network serial driver.I have:
-tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
-modem uninstalled / reinstalled
-update of Windows XP through windows update
-update of the bios / modem / network drivers from ToshibaNo luck, the RAS asynchronous card error is still there.
Any suggestion?
Thank you
Alessio - ItalyI think that this problem is Windows XP and map Asynchronous RAS, not the modem.
The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
http://forums.practicallynetworked.com/showthread.php?t=6781
I followed the instructions and run RArepair.exe.
It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager). -
Canoe install audio driver on my old Satellite A60
Hi all
I have an old laptop Satellite A60, and he had a problem so I formatted and reinstall windows, but I didn't have the original CD of windows came with this laptop so I used another CD that was provided by toshiba (I have another mobile satellite (I don't remember the exact model)). Everything worked fine, most of the toshiba utilities was already installed, but the graphics and audio cards drivers, missing (normal). I went to the toshiba website and download the audio drivers, installed, and when I clicked to restart the computer, after 2-3 seconds, I get a blue screen of death with the error STOP: 0x000008E and a TVS.sys file
So I opened the computer and the driver was still missing. A few times, the driver is there and windows will not open and I have to go into safe mode and uninstall the driver. It's really annoying. I have tried other older versions of realtek AC97 drivers but does not work either. I tried like versions of the original that I downloaded from the official website of toshiba and 3 drivers, nothing works... The graphics card has functioned well tho... but having no sound is annoying...
Does anyone have an idea what could be the problem?
Different models of laptops have different hardware platforms and each recovery image is created for some portable model. Maybe this other model has different chipset, GPU, WLAN card, sound card, and so on.
So I m really not ask you got BSOD at the beginning. There must be a conflict (registry entries) driver.What you can try is to install again and remove almost all the drivers installed and try to install the right drivers for the Toshiba download page in the hope that everything will be OK.
I m not 100% sure, but tvs.sys probably owned audio filter. -
Re: Satellite A60 - overheating problem
Hello
I have some difficulties to adjust temperature and fan on my Satellite A60.
The operating system is Debian and the fan operates at temperatures of 60-65 degrees Celsius (without any process started after the login).
I had installed utilities like toshutils, fancontrol, lm-sensors... but basically I have not found a solution for this:toshiba_acpi #modprobe
Error: No such deviceToshiba #modprobe
Error: No such deviceNow, I ask you advice, please.
If there are no alternative solutions, recompiling the kernel 2.6.24 (or other) is a solution to this problem? If the answer is 'Yes', how to prepare the package source?Now the system works, but not very well at that latitude this question isn't a good prelude to my summer job.
Best regards
HM,
already checked the debian/gentoo/ubuntu forums? Or maybe freshmeat.net where toshutils all appear in their projects?
Unfortunately I can't tell you why the modprobe won´t work but don't you compiled the kernel option ACPI from toshiba? It must be something that controls the trough of explicitly from functions ACPI kernel using the userlevel tools.
By the way: have you read newspapers after trying the modprobe of the listed modules you´ve? Please make the modprobe more 'verbose', there may be something usable...
Welcome them
-
Toshiba power saver crash on Satellite A60
Hello
I have a Satellite A60-297ITA bought with XP Home.
Now, I bought a XP Pro and I install reformat all the laptop.
Then I installed all the drivers downloaded from your site.
The Installation of pwrsav-sp-a60-xp-70302-en.zip seems to work very well, but on reboot, I get an error:
A fatal error has occurred. The program will end. Code: 0x7E.
What can I do?Hello nviau
As you know, it is not possible to create software and be sure that it works correctly in combination with other applications. The best example is the operating system you are using. It is usually many applications have an influence on other processes running, and it is possible that, in certain circumstances, occur a conflict or a malfunction.
It is not easy to solve this problem, and the best way to solve it is to reinstall the device using recovery DVDs. On this way the unit will be own pre-installed and all tools and utilities work correctly again. If you want to do it back up all your data.
Good bye
-
Satellite A60-106: cannot open Microsoft Office 2003
I have Satellite A60 - 106 laptop with windows XP Home pre-installed. After the recent failure of windows, I used the toshiba product recovery DVD. I managed to download other software like microsoft following works, note, Norton antivirus on CD. But Microsoft Student and teacher edition 2003 CD does not open in my CD/DVD drive.
It makes normal CD to access the noice after insertion, but is not accessible. By pressing "run" displays the error as not accessible D:\, i/o device error.
The same CD (microsoft 2003) opens with other computers.
So, where's the flaw and how to rectify?I tried all sorts of advice through the web.
Can someone help me please?
Hello
For me, it looks like a hardware failure. The error indicates that the drive is not able to read from the Microsoft CD-ROM.
There must be something wrong with the lens of the drive and therefore the lens cannot read the CD drive is not accessible!
Maybe after cleaning the lens you can use this CD.
Maybe you are looking for
-
I can't use the email application to send emails.
I was wondering if the port are bad or whatever, I've included a few screenshots, hoping that they will contribute.
-
two different players on one computer
My computer will only recognize the player of my wife, but not mine on windows media player
-
Original title: I will take a phone call from "Windows Care" telling me that my computer was sending Windows messages. He wanted to access my computer to solve the problem. Is anyone aware of this company? Does anyone got a call from 213-221-3528 "
-
SA is not to access the AD import
UM 4.04, E2k Updated Friday last to 4.04. With the help of DAD and account admin unit and it can access the AD accounts and shows a pass for all functions. However, when you try to import it will not discuss all accounts after the search. No errors i
-
I want to install the graphics driver ATI Radeon HD 4570 Win8.
Hello I want to install the graphics driver ATI Radeon HD 4570 for Win8, but he says In Device Manager, I found this: This means that win 8 already has the driver for it, but I want to install the driver that came with my laptop. Because I have troub