Satellite P755: Hardware buttons after upgrading Win10

Similar Questions

• Sattelite L50 - B - 1 P 1 after upgrade win10

  Hello I have a P L50-B-1 1 computer laptop and I have a few problems after upgrading windows 10
  1 video R7 driver missing so no present catalyst so I weak and box spring and frezess in games
  2 voice garbeld microphone when recording

  I know that the series is interrupted, but there should be some sort of fix for the problems I have atm experience.

  I don't want to go down to wind 8.1/7

  What are your exact specifications, processor, RAM and OS type 32-bit/64-bit

  According to what it is, you may be able to use the new Crimson AMD drivers instead. I have a L50D-C - 13 G and I abandoned the catalyst for Crimson drivers drivers and my machine is running great. I have a R6 of Carrizo A10 - 8700P with windows 8.1 and it works very well for me. The driver lists the compatible hardware, read it and see if your machine is supported.

  http://support.AMD.com/en-us/KB-Arti...tion_16.2.aspx

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• Satellite P50T-A-115 after upgrade Win8.1 does not play sound on HDMI

  A newly acquired by Satellite P50T-A-115, I upgraded to win 8.1, all suggested upodates and drivers are installed.

  I have no sound on my home theater system, playing from my laptop, while the video is good.
  The sound is the internal speaker of the laptop.

  There is no other choice than to my internal speakers in the control panel.
  I have seen similar questions to other laptops, but have found no useful suggestions.

  Did anyone get this working on a P50T-A-115?

  Please check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74149

  There was a similar discussion and the problem could be solved by the installation and update of drivers in the correct order and uninstall the Intel WiDi as suggested by Toshiba.

  Your comments would be appreciated.

• Satellite L300-215 - BSOD after upgrade to Windows 7

  Just upgraded 32 bit Vista to Windows 7 32 bit but keep getting BSOD (Blue Screen Of Death) when using the laptop. The events of the problem like log file below and it fails every time is same error code except BCP2 can change different Hex value.

  Have Toshiba upgrade disks used and all uninstalled programs that he asked me to do it before installing Windows. Model is L300-215 and laptop worked OK before upgrading to Windows 7. Have you tried the drivers audio and graphics of the site Web of Toshiba (old version of what was on the laptop after upgrade), but always the same question :-(

  Any help would be appreciated if someone else seen this error before?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 4th
  BCP1: 00000007
  BCP2: 000B458A
  BCP3: 00000001
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Hello

  When you get exactly this BSOD? Happens immediately or if you start a certain application?

  Have you checked for yellow exclamation marks Device Manager? Maybe a driver isn t working properly and you should update it.

  Also make sure that your BIOS is up to date. You can download the latest version on the Toshiba site.

  Last but not least blue screen often associated drivers or memory modules defective RAM. The latter you can check using Memtest86.

• Satellite C50D - no drive bootable after upgrade Win10

  Hi I need help I have upgraded to windows 10 on my c50d satellite an 11 q, but don't know what bad now I get media failed and then no bootable disk please don't restart I have no recovery disk and am at a complete loss as what to do... Thanks for reading the trace

  Are you sure you are trying to boot from the internal HARD drive?

  Recommend to check by pressing the F12 key while turning on the unit...
  The start menu should appear where you could choose the HARD drive as a boot device...

  In case you are not able to boot from the HARD disk (perhaps because the upgrade system went wrong), then you will need to reinstall the system using the recovery media...

  You said that you did not create this disc... Well, that was a big mistake, but anyway; You can order this support here:
  http://backupmedia.Toshiba.EU/

• Satellite L500-12 t: problem of FN buttons after upgrade to Win7 64 bit

  Hello

  I have L500-12 t and I have upgraded to WIN 7 64 bit.
  After the upgrade of the FN key does not and I cannot close on the wireless card.

  So I can't surf with the wireless.
  I have download all the drivers that I found on the toshiba site and it still does not.

  What can I do?
  * Thank you *.

  Hello

  I think that you didn t install the Toshiba software.
  You must install the VAP (value added package) and install the Flash Cards Support utility!

  Be aware of this

  Welcome them

• Satellite L650D HDMI audio driver problem after upgrade WIN10

  After the upgrade to Windows 10 audio HDMI stopped working.
  Tried reinstalling the Conexant Audio driver
  Any ideas how this problem could be solved?

  Recently, I saw something on the CATALYST of the interface driver. There is an option "INSTALL HDMI AUDIO Driver. I was surprised to see this option under Graphic-catalyst-Driver. But it is logical, the HDMI is a video like Audio (AV) connection.

  So please try to install the latest driver of your interface.
  Maybe it will work for you.

• S50 satellite - B - problem after upgrade Win10 touchpad

  I have a brand new S50-B-15F that I unboxed for the first time today. I have updated to OS to win 10, but the trackpad stops working after the initial upward boot (even if a USB mouse works fine). I've seen similar comments on this forum for another model of S50 (and referring I think to the pilot of the momentum) but not sure if this applies to my model. Could someone advise on the steps to solve this problem, keep it as simple as possible!

  good news... Thanks for the short comments...

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• Satellite M115 - no sound after upgrading Windows XP to Windows 7

  Hi all

  Recently upgraded my Satellite of Windows XP to Windows 7 Enterprise 32-bit. After installation, the high definition Audio Device appears in Device Manager.

  Initially, I had an unknown device listed, but that has been resolved by the installation of the pilot site supervisor password utility from Toshiba. Since then, I have experimented with a number of audio drivers without result. Does anyone have advice?

  I downloaded the Conextant 4.8.0.0 pilots, who are not out during installation by saying "Driver Installation Failed: could not find the device for this driver." So now, I'm sitting here without any noise. It's sad. Please help and I'll give you points.

  -Red

  Hello

  Remove all audio drivers, you have already installed, reboot the laptop and download an audio driver for the Toshiba driver page

  For European models, take a look here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/

• C850-A797 - Bluetooth driver satellite does not work after upgrade to win 10

  My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,

  I installed the battery Bluetooth for windows ver.9 but it also does not work.

  can someone help me with this please?

  C850 satellite is not listed as a book of 10 Windows compatible.
  This means that Win 10 drivers are not available for this unit.

  In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
  In the view of mark tab also the option Show hidden devices in order to get the big picture complete.

  Now after reboot, win 10 must search for removed devices and drivers missing.

  I hope this could solve your problem of BT.

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• Satellite L30 - frequent BSoD after upgrade of RAM.

  This problem is almost identical to [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=144540𣒜], but given that the response was too general and did not help, I want to provide more details about my problem and hope for a better answer.

  My L35 (i.e. American L30) came with Vista Home Basic and only 512M of RAM. It was slow, but smooth otherwise. The problems started after I upgraded the RAM to 2 GB occasionally a BSoD will appear, and the computer restarts after a second or two.
  Most of the time, instances of BSoD are not taken at random; usually, it happens when you watch a film or multimedia and online during the wake her up after suspend.
  Also, it happens much more frequently if an external monitor is attached. He does, connect an external monitor and watch a movie will result in BSoD with 100% certainty. My laptop has shared video memory, maybe it's a question here.

  The problem prevailed after that I installed Windows 7.
  Memtest86 + showed no problems with my memory
  Memtest86 covers all aspects of the use of the RAM?

  Is it possible that some problems may be overlooked by memtest86?
  Are there other tests of memory, that I could use, specifically to test the shared video memory?

  Not every hardware problem can be detected software.
  You have tested the RAM with Memtest86 +? Try using Memtest86 (no +).

  In the worst case, you must replace the RAM. Ask the dealer for a new computer. I m sure they will help you.

• Satellite L550: BIOS settings after upgrade of security suite

  I have two of my machines restarted two nights there after an upgrade to my security suite.

  Now my office restarted without a hitch and the upgrade went through without incident.
  However my L550 rebooted to a screen called "Phoenix SecureCore Tiano Setup" and I notice in the BIOS system Toshiba 1.70.

  Now knowing what to do, I ran across the screens that lists the components that were in the machine and after that just after the installation itself.
  Now the machine reboot ok and it seems to work more quickly - I have no beef with that, but I would have thought that Toshiba would have warned me that it was about to happen.

  I'm a bit experienced user and vaguely knowing what can be done with the BIOS settings and not knowing how to do these were my insides run at a gallop.

  What is the go with that?
  I now have to Phoenix BIOS instead of Toshiba and it's this kind of thing is going to happen in the future as a warning would be really appreciated by people like me!

  Hello

  Support L550 Phoenix BIOS but its modified by Toshiba.
  It s nothing unusual each laptop manufacturer to set the BIOS for the purposes of the laptop.
  To be honest I n t have any experience with the Phoenix SecureCore Tiano and cannot say anything about the modified BIOS options. However, each BIOS can be set to the default settings.
  So in all cases, you are able to load the default options in the BIOS.

  I'm not sure what button you press to get the default settings (I guess that F10) but this info is always mentioned at the bottom of the BIOS screen.