Satellite C50D - A - 13N - Windows question sleep mode 8.1 alarm

Similar Questions

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

• Satellite x 200 and strange question sleep

  Hello

  I have a strange problem with this laptop.
  I have windows Vista and everytime I put it in sleep mode (the lid) everything stops, but I have observed that, after 30 minutes, the laptop restarts and stays like that until the battery goes dead.

  Thank you

  Hello

  Is wake on LAN in the BIOS disabled option?

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• Satellite Pro A300 Wireless resumed after sleep mode problem

  OK, so I have this little 'itch' which becomes little boring sometimes. When I take my computer in sleep mode, it takes a good 30-40 seconds my Wi - Fi is reactivated. I mean, that's when my computer wakes from sleep mode and I'm in my browser, I get an internet connection for a good 30-40 seconds. I was wondering if there is some setting I've accidentally changed which makes my laptop to do this? Because I remember my laptop no this when I got it.

  Hey,.

  I agree with the user above. You should try the update the WLAN driver. Perhaps the current driver isn't working properly so an update should help you get rid of it. More recent and pre-tested WLAN driver that you can download on the official Portal of Toshiba WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  What operating system you are using?
  On Vista and Windows 7, you can disable in the settings of the WLAN energy saving feature Windows power management.

  Check this box!

• Satellite P30 Pro: Will not properly sleep mode

  Hello

  I do not normally use the standby feature, but it hibernates.
  Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
  Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.

  The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
  I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!

  Any help?
  Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.

  Thank you
  Mobo

  PS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)

  Hello

  If I understand you right, the laptop is on standby and it s is always connected to the local network.

  Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.

  Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.

• Satellite L670 - screen remains black after sleep mode

  I recently bought a L670. When I close the laptop, it goes into sleep mode. No problem with that. But when I opened the laptop again the screen remains black.
  I see on the drive activity light that the laptop come out of sleep mode correctly, but the screen remains black.

  I don't have this problem when the sleep mode is only a few minutes. Then the screen comes up correctly.
  But for example after an hour of sleep mode... no screen.

  I'm doing something wrong?

  Thanks in advance for your feedback.

  Hello

  I recommend the update to the BIOS and the display driver.
  It helped to solve a similar problem on my old laptop.
  Maybe it helps in your case.

  Good luck

• Windows 7 sleep mode is set for 30 minutes, but turns off after 30 seconds or so when I'm online

  My mother's computer sleep mode is set for 30 minutes, but it keeps complaining that when she's online, the screen keeps blacking out all 30 seconds or more and she has to move the mouse to retrieve.  Any suggestions on how to fix this?  She uses firefox as browser.

  Cindy

  Also, check the screen saver settings.

  Right-click on the empty desk

  Select Customize

  Select the screen saver at the bottom right

  Set it to None and uncheck the box "on resume, display the logon screen"

  Does this solve the problem?

• Satellite L300 automatically wake up from sleep mode

  Hello

  I have Toshiba Satellite L300.
  One day I found that when I close the laptop it goes in standby mode (as it should), but after a few minutes it is turn on even if it is still closed.

  After several minutes, that it's going to sleep again and then again are put on...
  Before there was not such a problem!

  What is the problem with my satellite?

  Hmm that's strange
  Maybe wake up on LAN or another wake-up call option affects this stand in mode?

  Try to disable this option in the BIOS and in device-> properties-> Advanced tab LAN Manager.

  Have you also checked the settlement by Vista power management settings?
  Do it!

  + How to manage Windows Vista power management features? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

• Satellite C50D - A - 13 G - question about memory GPU

  Finishing bought the new laptop, TOSHIBA C50D - A - 13 G, but I have a little problem.
  It says in the description
  (Graphics card: AMD APU A6-5200 with graphic AMD Radeon HD 8400 card)
  Graphics card memory: up to 4090 MB)
  but I do not have how to allocate this memory, I tried the BIOS, but the option to allocate memory is not listed there.

  Help, please

  In the specification is clearly described:
  > amount memory: up to 4 090 MB shared memory with 8 GB of installed system memory and up to 8 186 MB with 16 GB of memory system (with the operating system pre-installed 64-bit Windows®).
  With other words: with more RAM your GPU will use more memory.
  It works automatically and you can not change anything.

  So if you want to have more memory GPU you need to upgrade RAM.

• Re: Satellite C50D-A-13N - Optical Disk Drive eject malfunction of button

  Hello

  A bit of history; I took this laptop on behalf of my manager at work for the birthday of his son (tomorrow) and offered to set up for him. Unfortunately, the eject button on the DVD drive (and right click > eject in my computer) flashes the light and I can hear the spring trigger, but didn't actually eject the disc.

  However, it erases the memory disk in my computer (changes in office 2013 to the DVD player). I know because the paper clip trick works; I am able to insert a paper clip into the slot for manual release. As a result, I have proven that it can read the disks, it cannot simply eject.

  Here are the things I've tried various bandages around the web:
  -Tried to eject when booting
  -Uninstalled driver CD/DVD, auto-réinstaller at startup
  -Remove any software related to disk
  -Searched high and low for a pilot updated DVD without success.

  I came to the conclusion that the problem is hardware related instead of something to do with the software, everything is recognized fine, it's just the eject button that fail to work as expected.

  Then, because this kid's birthday is tomorrow, what I can do which does not send off for repair the machine?

  Thank you in advance!

  Hello

  If I understand the question; the eject button does not work properly, but you can eject the disc, insert the paper clip into the small hole near the eject button.
  Is this correct?

  Since there is no special software, which controls the eject button, looks like the related problem of material issue and I think that the only option to solve this problem is the replacement of CD/DVD drive.

• Satellite C50D-- Changed mode of function keys - can't change it back

  I have a Toshiba Satellite C50D-A, with Windows 8.1 who bought earlier this year.

  Recently, my function keys mode changed somehow and I can't seem to restore. When I bought the computer that the Fn button should NOT be pressed to use the special function keys (brightness, volume, etc.), however, now I have to press the Fn button to use all the special functions and since I have yet to use the F1 - F12 keys on a regular basis, it is quite unrealistic and all simply boring.

  I've already stepped into the Toshiba system settings set the keyboard special purpose and gone back and forth between the two functions several times still nothing helps.

  I return all system settings by default (as special function keys were my fault) and that didn't work either.

  I'm sorry is very long, but I'm at my home and I would like to solve this problem as soon as possible.

  Thank you in advance for all replies :)

  > now, I have to press the Fn button to use all the special functions

  This means that the special function mode is disabled.
  You can enable it in the BIOS or in the Toshiba System (HWSetup) settings

  To access the BIOS, you will need to press F2 when starting the unit.

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.

• "Sleep" mode Windows 7

  Computer analogue mode past 'sleep', says sleep and finally stops the computer.  You must restart the computer twice before, it will allow you to boot into windows 7.  How do I cut this feature?

  Hello

  How to keep Windows 7 to enter the mode 'sleep'
  http://www.ehow.com/how_5759560_keep-Windows-entering-sleep-mode.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  How to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Re: No Signal from Satellite C50D - A - 139 HDMI out port

  Hello

  I connected toshiba Satellite C50D-A-139 (windows 7) through the port (using an hdmi cable) HDMI to plasma tv, but the TV screen only appears "he don't no signal.

  I don't know that HDMI cable works, locks, that it works with Playstation 3. I tried to click on button of winows + p""command Fn + F4", but there is no result. nothing happened.

  I also right click 'the mouse' and choose 'screen resolution', but there is also a single screen (laptop screen) to choose. I tried to click on "detect" but nothing happened.

  Please, give me some advice...

  According to specification for laptop, your laptop didn't come with preinstalled operating system. I checked the Toshiba download page and your laptop is fully supported for Win7, so I just hope that you have installed all necessary drivers and tools and utilities.

  A few questions for you:
  Are all the drivers, especially the chipset and display driver installed correctly?
  FN keys work in general (Flash cards shown when you press the FN key)?
  You have activated the right port on your TV?