Satellite L300 - 11 h Fn my key combinations do not work!

Similar Questions

• Satellite P100-221: FN key combinations do not work properly

  Hello

  I have the satellite p100-221 with pre-installed Win XP MCE. After a week of using my computer, a problem with the function keys blue appeared. FN - f1, fn - f2 and all the other fn keys combinations do not work properly. They seem to work, I can change the brightness, switch the touchpad on and out and so on, but no icon on the Info screen appears. While pressing the combination of function keys, the icons on the screen shows the time. How can I solve this problem? Is it software or hardware related?

  Thanks for any help.

  Hello

  I put t think that this question is related to the material.
  I recommend the update of the Hotkey utility.
  On the page of the Toshiba driver I found two different versions:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Your device is Satellite P100-221, then I guess the extra number must be PSPA6E.
  Do not forget that you are using the correct drivers for this device.

• Satellite L650: With the FN key combinations do not work in W7x64

  Hello

  System
  

  Satellite L650-1KU

  Part number
  

  PSK1LE-01700MRU

  
  I have install Windows by myself - this laptop don't have any operating system from the factory.
  Installed Windows 7 x 64, all drivers and utilities site driver Toshiba for windows 7 x 64 available for my laptop model.

  I have no any unknown device in the Windows Device Manager, all the installed drivers and all hardware components woks fine i.e. camera wifi or bluetooth or web.
  But I still can't use some combinations of keyboard with the key Fn. not all, only five combinations do not work: modes of energy Fn + F2 Fn + F4 hibernation, Fn + 1, 2 zoom and devices wirelles Fn + F8.
  Search, I found only mentions on Fn + 1, zoom 2 - this funtion providing some util named Toshiba Zoom but no any Toshiba download page don't Zoom for my model of laptop and W7.

  Looks like it must have installed some additional tools provider for the manipulation of this combination, but I can't find any soft or extra info on the driver download page.
  Maybe there are a few utils which must be placed in lists of drivers/software for 32-bit windows and it will be very good for 64 bits one?

  All the combinations that works great as volume + Fn + Fn + 4 3 or mute Fn + ESC does not show any popus time of pressing, just functions without any indication.

  Dear users and support, can you help me what should I install utils extra to support the Fn + F2 modes of energy combinations, Fn + F4 Fn + 1, 2 zoom hibernate and Fn + F8 wirelles devices?

  Post edited by: Gimli_r

  Akuma is right. For the feature keys FN, you install Toshiba Value added Package. This package contains several different applications.

• Re: FN + F8 on Tecra A2 key combination does not work

  Hello

  I recently installed a new copy of Windows XP SP2 on my Tecra A2 (pta20e).
  I installed all the drivers drivers Toshiba page and everything works fine except my FN + F8 combo wireless.
  The FN keys work with other FN keys and wireless network is it.

  I can't turn it on. I welcomed the key FN in the BIOS settings I was hoping would fix, but it didn't. I also read other discussions on this problem without success so I m stuck.

  Help, please.

  Hello

  I think there must be a problem with your installation if FN + F8 key combination doesn't work...
  What drivers/tools that you have installed in what order?

  Normally, you need to install common Modules of Toshiba and controls tool. You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/

  By the way: common Modules must be installed in the first place. If you have already installed, try reinstalling it.

• Satellite A40 - 231 - Fn + F6 and Fn + F7 key combination does not work

  I have toke my cell phone to a technician for formatting.
  However, when I tried to adjust the brightness of the display by pressing Fn + F6 or F7, it does not work.

  This function does not work on my laptop.

  Advice please?

  Thank you
  JAMA

  Hello

  Go to the page of European driver of Toshiba.
  He chooses;
  Archives of the series Satellite Satellite has Satellite A40 Win XP

  Now, you will get all the Win XP drivers for this laptop.
  You must install the common Module in first, then the energy saver.

  Check it!

• Satellite L300 - after what Win8 load DVD drive does not work

  I've just loaded Windows 8 on my Satellite L300. The DVD no longer works with a 39 error message, it indicates that the driver is corrupted. Also attached external DVD is not recognized. I can't find a driver to reload.

  All of the suggestions.
  Concerning

  See this article:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?PF=true&soID=3516888

  If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator is installed on the HARD disk, there could be a problem between Win 8 and software mentioned
  So to uninstall these tools, then restart your PC using the power--> reboot option in Windows 8. Your CD/DVD should be available now.

• CTRL + Shift + number key combination does not work

  I can use Ctrl + Shift + [A - Z] very well, but Ctrl + Shift + [0-9] (main keyboard, not the numeric keypad) does nothing. I checked for access keys but don't see active at the level of Windows.

  Clown fish was the culprit. It must be turned off completely. Just by disabling shortcut keys don't seem to work.

• Screen lock key combination does not work in the Sierra

  Hello! After the upgrade to Sierra, I can switch over my screen using the command-Shift-Eject button combo.

  I have a Macbook that is anchored to the bottom of my desk, and security, we need to lock before leaving our office.

  Thanks for your help!

  Gerryx

  Nevermind, it seems that now you just have to do a little slower front so that it works.

  So still works, just hold one at a time from below upwards, a second about each, and then some more time to eject.

• Qosmio X 300-key Fn does not work

  Hello!

  My work does'nt-Fn button.
  I use Windows 7 Professional 64 bit and I downloaded & installed the value added package for Windows 7 64-bit.
  But my Fn key still does not work.

  So I uninstalled all drivers Toshiba again and reinstalled them.
  Nothing seems to work.

  What can I do?

  EDIT:
  I tried to find the Flash Utility card drivers for Windows 7 64 bit. But I can't find them anywhere!

  Post edited by: wuumbs

  > I tried to find map Flash Utility drivers for Windows 7 64 bit. But I can't find them anywhere!

  Of my knowledge Support Flash Card utility is not related to a specific model laptop.
  On my Satellite a series of laptop I installed Support utility of the Flash card that I found in the section L500 and it worked.

  Try this too maybe you control also the series which is more recent than L500.

• Reset password screen is coming and key board does not work

  Hello

  When I wake up in the morning and tried to start my mac pro 13 book he has not begun and this window appeared on the screen saying reset the password but unfortunately I can't type password as key board does not work... What to do now...

  

  Try to boot inSafe Mode and see if the problem persists?

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first.)

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• Keys ' fn + ' do not work - Hp Probook s 4730. No "action keys mode" on my Bios.

  I have a Hp Probook s 4730 with 64-bit Windows 7 and Bios F.29. There are no blessed "mode keys" within this version of the BIOS, which is available on the HP website to download latest version . Yes, I looked several times for the keys to action or anything like him, but he does not really exist. My keys "fn + ' do not work!

  I see two possibilities here.

  (1) the most likely issue is that "support for action" is disabled in the BIOS.  Here is a document that shows exactly where the 'action key support' option should be located in the BIOS of your laptop.  So when you go to this section of your BIOS is not listed?

  (2) you have not installed "Support HP Hotkey'.  This is what contains the drivers for the function key (Fn) support.  You can download the drivers here.  After you download the drivers that you want to remove the drivers in the section "Keyboard" in the Device Manager and restart the laptop.  After the restart, re - install the drivers and try to use your function keys once more.  Finally, please post the result.

• Re: Satellite Pro L450 - FN + F8 key combination does not

  Hello everyone

  Please help me WiFi my laptop Fn + F8 power button does not.

  can someone help me with this...

  Hello

  FN + F8 key combination will be used to turn the WLAN feature so before we start a long discussion, what operating system is installed and the card wireless network does appear in Device Manager correctly?

  If all other FN keys work, I would try to update the portal WLAN Toshiba WLAN driver:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite L300 - cannot enter Windows and recovery disk will not stand

  Good evening

  I have a Satellite L300. A month ago, I bought and install an upgrade to Windows 7 (I had Vista). Last night, my laptop was working fine and this morning when I opened it I got this error:

  BOOTMGR is corrupt. the system cannot start.

  I did some research and tried to boot from the recovery disc. Laptop computer the disc I get the windows is looding files screen and then a company Microsoft is displayed with a bar above it and then I get a blue screen that says:

  PROCESS1_INITIALIZATION_FAILED vista

  Now what can I do to reformat my computer and reinstall if I can't load the recovery disc!

  I tried to put my DVD of Vista I have for my other PC, but I have another error black screen...

  Can someone tell me what I can do now?

  Is it because I have a recovery CD for Windows Vista and not 7?

  Okay, so I read several post here and the only thing I can't think is the hard drive... but it had already changed a few months ago by Toshiba... now my laptop is not less guarantee more with Toshiba, but I have an extended warranty with my VISA... If anyone has any idea here, I'll try to bring it where they change HARD drive the last time...

• Satellite L300 has only a black screen and will not load.

  Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
  See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

  Can someone help

  Thank you
  Tony.

  Hello

  You mean that you are not able to access the BIOS?
  Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

  If nothing will not help to remove the battery and disconnect the portable AC.
  Wait for about 1 hour then reconnect both sides and try to turn on the laptop.