Satellite L50 - B - ethernet stopped working

Similar Questions

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Satellite L550D - WIFI connection stopped working

  Hello!

  Satellite L550D, WIN7, Realtek PCIe FE Family controller

  My wifi stopped working suddenly.
  Although my router works fine for 2 reasons
  > I am currently connected with an ethernet cable to the router
  > I have 2 Android tablets that are WIFI connected to the router

  I read a few threads.
  I understand that I must:
  1. uninstall/reinstall 'Toshiba Value Added Package.
  2 uninstall/reinstall "Support of Flash memory card utility"
  3. uninstall/reinstall "Realtek Wlan adapter"

  Please tell me more.
  1. my Ccleaner found 'Toshiba value added package "; I can uninstall it. Once discharged, how will I re - install the new version of PVAT?
  2. How will be the uninstall/reinstall "Support of Flash memory card utility"?
  3. How do I uninstall/reinstall "card utility technical support Flash?

  I'm sorry. It is obvious to you. I am only a user of PC; and it's not obvious to me.

  Thank you.
  Concerning

  Flamboyant

  Hello

  Before you begin to uninstall or reinstall some Toshiba firmware, I would like to know what Satellite L550D-xxx you exactly.

  The point is that different L550D models were equipped with a different wireless network cards.
  Not quite sure if your have a Realtek Wlan card. It looks like a Realtek LAN card.

  However, you must first check if the wireless network card is recognized correctly in the Device Manager.
  In the Manager of peripheral devices, network cards, you should see LAN and WLan card.
  In the case where the card WLan display correctly (no yellow exclamation) WLan driver installation is not necessary.

  In this case, you should go to the next step: check if you can enable / disable the wireless network adapter using the FN + F8 key combination.
  Where this is not possible, check if other keys FN function.
  Where other keys FN don t work, you must reinstall the software mentioned (Toshiba Value Package added, Flash cards).

  This can be done in the control panel-> programs & features
  After that the two software can be removed, clean the system using CCLeaner.
  Now, you can check the EU Toshiba driver page http://www.toshiba.eu/innovation/download_drivers_bios.jsp to download the software deleted.
  Installation is easy; Unzip the package and run the installation exe file

  Then you should be able to use the FN + F8
  After that the WiFi network has been successfully activated, go to the network & sharing Center-> manage wireless (left) and click Add to configure the new wireless network

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro L500 - Webcam stopped working

  The Web camera integrated on my Satellite Pro L500 stopped working with the following message:
  C:\Program Files (x 86) \Toshiba\Toshiba Web Camera Application\TWebCamera.exe

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.
  The event log points to microsoft.vc80.openMP.

  Could someone tell me please how to fix the web camera. I use it very rarely, so I don't know exactly when it has stopped working.
  Thank you.

  Hey,.

  What do you think about reinstalling the webcam software? Maybe it will work

  Please see the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just search your laptop model and the available downloads. If you find it, download the new Camera Assistant Software but before you install it, first remove the old version and restart your computer.

• Satellite C855 - speakers suddenly stopped working

  I have a Satellite C855-1J2 running Windows 7 Edition Home Premium SP1. I turned on December 21, 2012 and installed five applications - the latest versions of Firefox, CeltX, Notepad ++, Open Office and Microsoft Security Essentials (I removed McAfee). I have the latest Windows. Since then I have not installed other applications.

  Three days later, my laptop was working fine until, suddenly, that the speakers stopped working. I can identify the specific incident that caused it. I connected a pair of perfectly ordinary headphones using the standard headphone jack, power the laptop off, after that I was done listening but headphones plugged on the left.

  When I turned on the laptop back the next day, no sound came in headphones.
  When I unplugged them, no sound came from the speakers.
  I rebooted my machine and the speakers worked fine.

  However, I am now in a situation where whenever I turn on my laptop, the speakers do not work and they will work again when I restart then. A little investigation of this problem shows the following...

  Whenever I turn on my laptop and go to control panel-> hardware and sound-> manage Audio devices I see two items:

  (1) ' - high definition Audio Device - speakers not plugged"with a speaker greyed out icon with a red arrow.

  (2) "audio digital (S/PDIF) - high definition Audio Device - default device" with a colored external amplifier icon (it looks a bit like a DVD player) with a green check mark. There is an icon of audio level next to him that shows sound whenever the sound is played on my laptop, but no sound is audible, either through my speakers or headphones.

  Whenever I then reboot my laptop and go to control panel-> hardware and sound-> manage Audio devices I can see an article:
  "Speakers - Realtek High Definition Audio - Default Device" with a colorful speaker and a green arrow icon. The sound works perfectly well.

  I already looked online and the Toshiba forums for a solution to this, but while I found lots of people with similar problems of speaker with Toshiba Satellite laptops, I have not found a solution (and when I say something, I mean something a little more useful that "have you tried completely reinstalling your operating system') so this thread.

  Even if a reboot is currently to solve my problem, I obviously shouldn't have to restart my machine at all in order to get something as simple as his, so my questions are:
  (1) what is the cause of this problem - in other words, why what is happening?
  (2) what is the Toshiba solution to this problem?

  Thank you very much.

  Hello

  It seems to me that the issue you described above that the speakers would not be chosen as device by default, but the Audio Digital (S/PDIF).
  Somehow the audio driver cannot detect the first initialization of the system speakers.

  I don't know why this happened but I have two proposals:

  (* 1) * uninstall the audio driver from the system. Download the driver from his most recent of the Toshiba page and install it after restarting the laptop first.

  (* 2) * if installing the audio driver is not enough, the last resort would be the recovery of the system.

  (> 2) what is the Toshiba solution to this problem?
  If you want to get a recommendation of Toshiba, I would give advice to connect with people. It is the community of users.

• Re: Satellite P100 PSPAAE - sound stopped working

  I'm on Vista Home Premium using a Satellite P100 PSPAAE. My sound doesn't work anymore, I think after an automatic update.

  I downloaded and installed the latest driver from Toshiba support but no joy, and make site back does not set it.

  MS load an older version, when I have auto update.

  Which driver should I I have installed cause I'm totally confused now. Is there a trick to install?

  I wouldn't mud autour trying to find the right software. Instead of buying everything and tell them that the sound has stopped working. They will fix it for you.

  I went through it and it turned out to be my hard drive. Could be a different default for you, but of course it took the sadness on me when I arrived at the place to fix it for me.

  Good luck.

• Satellite M60-132 - USB stops working until you restart

  My problem looks like this:

  All USB ports die after a few minutes (time may vary, but is shortened recently) after the start. They give no error - the USB mouse stops responding, the USB drive gives stops giving "delayed write failure" or sth like that. They are all visible and OK in device (Windows XP) Manager, no problem not being reported here. They have just stop working. I tried to reinstall Windows. It is not dependent on the OS actually. For example, I can boot from a live CD of SuSe Linux and ports will also die after a few minutes - they do on any OS tested.

  Now, I have discovered (GOOGLE usb ports stops working until the reboot) that several Satellite M60 users report this problem with their old cell phones. Exactly the same thing - ports die after a certain time of start and remain that way until you restart. In one case the user writes that he bought a cardbus PCMCIA USB controller and the problem continues - the ports of the controller when dying as well as embedded.

  My idea is to try even when the PCMCIA - maybe it will work in my case (another chip etc - you have never know). And anothr one must try to connect a USB hub to the Firewire port available. There are USB to Firewire Converter cards - could work like that?

  Anyone know any solution to my problem or have an opinion on my ideas? I am looking to buy a new laptop, which I can't really afford right now...

  Hello

  To be honest I've ever read on these problems on the Satellite M60, but it can happen from time to time, because it of also a fairly old laptop.

  My friend also uses a PCMCIA card that has USB ports on his old notebook. He is quite satisfied with this solution because it don t need to each time the USB ports. Just sometimes if he's copying files on USB.
  These cards are cheap, you can get it for a few s Euro and you can buy this card where you want, for example Amazon.co.uk.

  I never heard firewire to USB ports, which is new to me and I n t have experience with this.

  Welcome them

• Help! Satellite 5100 - 503 has stopped working!

  Hello!
  I have a Satellite 5100 503 and was really satisfied until yesterday.
  Now it has stopped working.
  What I did: closed the laptop after work (everything is ok) and it only stems for a while. When I opened the laptop again to continue working, nothing happened.
  Only the small frontdisplay showed me a spinning CD (no CD inserted) and battery light. After pressing the button on the sur-signe appeared, but nothing happened again. By pressing the button again (a few seconds), do go away on-sign. No display, no fan, no noise of hard disk in any case (ono/stop). Insert an audio CD and works by pessing the play button! Soundsystem works well.

  Does anyone have an idea what could be the problem?
  questions? more info needed? Thanks for asking!

  Help, please
  Günther

  Hello Guenther,

  have you tried to remove the battery for about 5 to 10 minutes! It seems that the laptop is unable to start the file hibernation to start windows. You can also try to push the button to start for 5 seconds.

  Theo Cu

• Satellite 1130-Z24, system stopped working altogether

  Hello

  My system stopped working altogether, since it was abandoned, from short distance however. When it is connected to an electrical outlet, the light work, so I suspect power are trying it, and I think I've damaged the motherboard or the power, but I hope that something simple. Someone at - it all manual showing how to disassemble the satellite 1130, or any other suggestions.

  Kind Rgrds

  Chris

  Hello Chris

  There is unfortunately no official document how dismount/mount your Satellite. In my opinion the best solution is to contact the Service of your country partner.

  I'm sure they can help you. Who knows what part of the equipment is damaged.

  Good luck!

• Satellite A50-110 suddenly stopped working

  Toshiba Satellite SA50-110 psa50e

  I have a Toshiba laptop, and suddenly it stopped working,

  I mean when it is, I only see a black screen with the letters

  N
  password = *.

  I don t know who did it, but there is nothing written in the manual, I tried the restore cd that came with the laptop.
  Nothing works at all; I even tried some backdoor passwords

  I opened the laptop but didn t find any type of battery, there is only one big battery.
  How looks like the bios battery?

  Hello

  Are you sure that it is a BIOS password?
  There are two possible passwords: password HARD drive and the BIOS password
  You are able to access the BIOS? You can access the BIOS by pressing the ESC key.

  Anyway, if this is a BIOS password then you will not be able to remove it without the help of ASP.
  The BIOS password can be removed like on the desktop PC! The procedure is different

  It s really strange that the laptop request a password if you didn t put, but as I said above, only the ASP could remove this password.

  Welcome them

• The combinations of keys FN on my Satellite L Windows 7 stopped working

  The combinations of keys FN on my Satellite L650 - 1 Hz, Windows 7 Home stopped working. Can someone tell me how to make them work again? And ideally, why they stopped?

  Try to restart flash cards. Start > all programs > Toshiba > utilities > restart Flash Cards

  If this will not help, try reinstalling additional package from Toshiba.
  Remove the preinstalled version and install the latest version of http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Please post comments.

• Because I installed a Satellite L300 printing software stopped working

  Hello!

  I'm new here so not sure if I'm posting in the right place. Mods, please do not hesitate to go to the relevant section, thank you.

  OK, I have a Toshiba Satellite L300 laptop and since I installed a printing software Wednesday evening, my laptop suddenly stopped working!

  Since Thursday night, I tried to make it work, but I am faced with this message:

  When I load up, it goes to Windows error recovery:

  "windows does not start.a recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.if power was interrupted during startup, choose start windows normally"

  then it gives two options: Launch Startup Repair (recommended)
  Start windows normally
  ==========
  -then I click on (recommended) launch Startup Repair
  -then a scren called load' system recovery options «...» It is said: select an operating system to repair, click next.only windows vista listed operating systems and can be repaired

  If you do not see your operating system listed, click load drivers to load the drivers for your hard disks...

  but nothing comes up so I click load drivers and it gives me just loads of records at random... and I don't have any idea those to load
  ========
  5 years report an abuse
  Additional details
  so I click "next".
  ========
  Then, I have 5 options:
  -Startup Repair
  -system restore
  -windows complete pc restore
  -windows memory diagnostic tool
  -command prompt
  ==========
  Startup Repair says that manually, it can't solve any problems

  -simply said system restore your computer is located in a limited State, and this action can not be changed... but there is no option to do so

  -restoration of windows complete pc says I need to insert a backup disk which I do not have

  diagnostic tool memory Windows says that windows blocks it
  ============
  but on restoring system it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
  but I don't no where... I typed in the command prompt, but don't understand how to use it
  =========
  I also tried to click Start windows normally, but it won't work

  If the problem is the software installed, start Notepad in safe mode and try to start restoring the system from there.
  Please let me know what options are available. Can roll you back OS a few days back?
  Are some that are listed restore points?

• Satellite L850 - USB Port stopped working

  Hello guys,.

  first sorry for my bad English, im from Germany.

  My new clearly L850 satellite has had some problems with sound-Port USB.
  I think it's the Usb3.0 Port on the left.
  While I'm workin with an external keyboard, the USB Port has stopped working and cannot identify the keyboard.
  All other devices that I put there, are out of order, but when I put an external hard Powerdevice with separate data for laptop, that he is there something ist connectet, but can't identify it.

  I have try all troubleshooting close it, like install new drivers, disable ports and restart and any kind of it.

  So maybe you have another tip for me?
  Or do I have to bring my laptop to the store for warranty?
  A Windows 8 64 bit on it, maybe it will help.

  Best regards, neothic

  Have you tried reinstalling the driver USB 3.0? Please try and check the functionality. If this will not help I recommend you do the ultimate test: back up all your data and reinstall Win8 using recovery media. Test it with clean OS preinstalled and factory settings.

  In the worst cases, you should contact the nearest Toshiba service provider and ask for help.