Satellite L70-B-119 - creation of recovery on USB

Hello

Going to buy the laptop Satellite L70-B-119
I will need to create the recovery disk
Can I use usb 2 or usb 3 formatted in fat 32
What size usb GB do need me for this machine
an alternative to this will be the satellite L50-B-1NL
It would be the same size usb

Concerning
[email protected]

I do not have these models of laptops, but on my Satellite U940 with Win8 I used the 16 GB USB key.

When you start the creator tool Toshiba Recovery you will see information on recovery image and USB key, you can use. In my recovery image view is between 12 and 14 GB 16 GB USB key will be right for you.

Tags: Toshiba

Similar Questions

  • Question on Satellite L70-B-119 function key

    Hello
    I have a Satellite L70-B-119 and recently after a trip abroad my function keys have been restored to use standard instead of the function which they have been defined in the. I tried to change it in the Control Panel, but nothing seems to work.

    Any help or suggestions please?

    Thank you

    To be honest I don't know what you're doing, man, but what I know is that you can switch between the standard and special mode.
    I send you a screenshot where you can change it.

    If I misunderstood your question please be nice and explain exactly what you mean.

  • Satellite T110-12 t - creation of recovery media

    I recently bought one handed to nine Toshiba Satellite T110-12 t and am trying to create a recovery on 2 x DVD media. It is now approahing 2 hours and the gas indicator is still about 50% of the first disc!

    Someone can you please advise me if this is normal or should I give up and start again? What is your experience of time?

    Hi OfficerDibble,

    Usually create the recovery media takes less than an hour.

    I put t know what s going bad on your laptop, but it could be related to low quality mediums you use. I have good experiences with the DVD-R media (NOT of DVD + R) of Verbatim and TDK. It still works fine and I recommend these high quality media.

    As far as I know Satellite T110 also offers an option to create files on USB recovery. Have you already tried that?

  • creation of recovery on USB flash drive image occupy space drive (C).

    Hi friends, I have a computer hp laptop with window 8 preinstalled. Today, I created a USB stick 32 GB recovery image. In the image of disk recovery pen occupy about 21 GB, but the strange thing is that this process also occupy my equal to 21 GB of disk space (C). Before creating recovery USB key image, my free memory from the disk (C) was 60 GB free but after creating it, drive (C) reduced to 40 GB memory. Is this normal or has done, I made a mistake. If it is not normal that how I can release these 20 and 21 GB on my drive (C).

    Process that I followed to create recovery image- as indicated by the hp guide
    HP Recovery Manager > under the heading- (I liked to take the measure of security), I chose "recovery media creation
    and follow the instructions on the screen... and successfully created the recovery USB Flash key. But my drive (C) breaks down. I don't understand why this is happening because I provided the window 8 with 32 GB USB key to create the recovery image then why there are also equal space on drive (C).
    Please help me friends how free up my space of 21 GB drive (C).       Thank you...

    Hi John, first of all thanks for reading my problem and give me the solution. I created the recovery hp by using hp recovery manager disk, but now my problem is sloved. Here's how. Searching on the net about my problem, I get a link to my solutions. Multiple method received there but my problem get solved by the first method only. There, he is responsible for download Piriform CCleaner, install the same. Restart the computer. Open the ccleaner > there you will get the "Run cleaner" option and follow the instructions of onscrenn. And everything about the reader is done.

    THANKS to PIRIFORM Ccleaner.
  • Pavilion 17-G127DS: creation of recovery on USB

    Can anyone tell me approximately how long it takes to create a recovery disc (actually on USB)?  I started it, and it seems that it is 99% for two hours.

    It must perform any verification on its own.  It was all I had to do so that he can perform the restore.

    Of course, it's Windows, so who knows?

    It should finish alone, however, although perhaps after he convinced you he stop doing something useful.  None.

  • L70-B-119 and satellite recovery disks

    Hello

    To the purchase of computer SATELLITE phone L70 - B - 119 ffrom Argos - Does it come with greetings DVD backup recovery CD - ARGOS DO NOT WANT to OPEN THE BOX WITHOUT PURCHASE
    concerning
    Toshiba L70 - B - 119 Core i3 17 inch 8 GB 1 TB laptop

    Toshiba laptop offers with preinstalled OS but recovery installations discs are not part of the package. Recovery image is saved on the HARD drive and you must create bootable recovery (DVD or USB) media only with pre-installed software.

    Toshiba has designed the small Toshiba Recovery Media Creator called tool. This tool creates media bootable recovery you can use for recovery image installation.

    I can't say for sure, but I think that Toshiba offers not recovery with new products installation disc for 6 years.

  • Satellite P50T-A-119 - screen does not work and recovery never ends

    Hello

    I have a Satellite P50t-A-119
    The built-in screen no longer works:

    The Toshiba leading innovation splash screen * never * appears on the * built-in screen *.

    On a * connected external VGA-display * I see the following type of screens (if the machine was forced to stop, it can detect before if connected externally powered, another screen image any at all):
    -BIOS (after F2)
    -Boot (after F12)
    -all screens simple to begin repairs (with a blue background).

    I already tried all possible types of recovery (the recovery on the HARD drive partition, with 3 sets of recovery DVD), repair, refresh, never successful auto repair.

    When I start a recovery from DVD (with the external screen), it wonder in order all DVD, copy the files, etc., request to restart the computer. Then after the Toshiba, Leading innovation splash screen appeared and shot a little, I * don't have an external display black-lightning *.
    When I start a recovery from the HARD disk, the Toshiba leading innovation appears and for a long time increases %-complete. After a while (every 45 minutes approximately at 60%), I have the same situation: only an external black lightning.

    This situation is already after I sent the machine (with the same symptoms) to Toshiba service center. They have reinstalled the recovery image (which I think was still okay) and charged me the equivalent of EUR 100, saying: there is no guarantee. When I got the machine I could actually begin as out of the box, after the updates first 83 (initiated by the preconfigured McAfee) and 2 reboots of the laptop is already more (hangs up, without the screen, etc.).

    So my questions:
    -make anyone had similar problems? And a solution ;-)
    -Doesn't he know about the procedures used by the service center to reinstall the recovery image (I'd like to be sure that it s warranty/defective material before I send it again)?
    -A way to check the material?

    Any help is greatly appreciated.
    LeMeutz

    Hello

    Sorry to hear that you have all these problems with your laptop.
    At first, I must say that I've never had such a problem and can not say with certainty what can be wrong there.

    In my opinion, the main problem is the screen. It's OK that you try to use the external screen and try to solve this problem, but I think that recovery image installation is not solution for this. You wrote that your machine has been already verified by Toshiba service but I n t understand what was the problem with the display. Is everything is OK with the screen now or not?

    Back to the recovery image:
    This is a user forum, and I think that no one here will be able to explain the policy of service exact Toshiba but, in my opinion, if you have long guaranteed valid, service provider is required to help you without taking any money except in special situations such as the removal of the BIOS password. So I don't understand why they took 100 euros for the recovery image installation.

    I think you should contact the new service and explain the situation. Do some photos as proof of what exactly happens and tell them you want to have good rework the device. You paid for the new product, you have the guarantee and book must work. If there is problem, service should make the diagnosis, what is the problem and fix it.

    Later when get back, creating you recovery media first. It can be DVD or USB. After having done this disabling automatic Windows update and when you will be informed about updates check the list and install important updates only. Do not install updates such display or WLAN driver.

    Sorry, but I can't say much.

  • Need help with installing Win7 on Satellite L70-A-12W

    I bought Satellite L70-A-12W with preinstalled victory 8.1 two days ago... I have no recovery of win7, but I have Win7 64 Bit DVD new.
    I would like to install win 7. I follow the instructions concerning the closing down, on Bios (I have version 1.3) safety boot is disabled and the boot mode is MSC mode.

    I did a recovery on USB media if something with is wrong. Earn 8.1 I installed Paragon Partition Manager 14 (free version) and see the Partition Table. It UriPattern like this:
    1 partition - system - 1-GB NTFS (Partition of Service);
    2. partition (no name) - 100 MB - it's the gray color.
    3 partition (local partition) - 128 MB;
    4 partition C: (win 8.1) - Go 920 - NTFS drive.
    5. partition - recovery - 10.1 GB - NTFS (Partition OEM Service).

    I would like to keep evrything what is, if possible, and instead og Win8.1 install Win 7 ultimate 64-bit (which I have). And after than that, resize this partition of 100 GB and make a second partition private for my data - partition D: - for example.

    I did things in the BIOS and win7 DVD and got error massage: Windows cannot be installed to this disk. The selected disk is of the GPT Style partition...

    I found a solution to clean the disc in the BACK, but I'm not sure that I have with this procedure will delete oll data disc. I'll guarantee loos e if I do this... If all other partitions will remain instead of C--> I can always make backup returns with media recovery with win 8.1 and hopes to keep the warranty.

    Now, I don't know what I have to do...

    I would just have win 7 on my laptop with minimal change to the partition table and all the partitions instead of C (where now is win 8.1).

    Could you please help me...

    Hello

    The question is: why you want to keep the present partitions on the HARD disk.
    Using two systems Win 8 and Win 7 on this laptop?

    The fact is that if you want to use only Windows 7, it s not appropriate to keep the old partitions on the HARD disk.

    Secondly, you already have the Toshiba Recovery flash memory stick.
    This recovery media allows you to return to the factory settings.

    This means that recover the laptop using this memory flash USB stick recovery would again create the same partitions and install the Win 8.1 System.

    Finally and above all Windows 7 supports 4 primary partitions as primary partitions are applicable to the tables of partition MBR and partition table MBR allow four primary partitions.

    After you create the primary partition 4th Windows system will accept only the volumes 'Dynamics' (logical drives). You must create an extended partition containing many logical partitions.

    However, if you use a table of GPT partition that is supported by the 64-bit Windows versions, you can configure up to 128 partitions and you need t differ between "primary" and "extended" partitions

    In addition, the GPT partition table also requires the UEFI BIOS.

    More details here:
    http://support.Microsoft.com/kb/2581408

  • Satellite L70-A-139 - SSD upgrade

    Hello

    I have a Satellite L70-A-139, and I want to spend my HARD for one SSD drive. I already opened the back to see, and there is a label that saids "only 7mm.

    The ssd I want to buy is an EVO of 840 SSD 250 GB.
    But that one is 6.8 mm in height, the it will give installation problems?

    Thank you

    I don't think so. Remove the two HARD drive mounting screws and disconnect the mounting of the HARD drive to the connector on the system board.

    While the hard disk onto a flat surface and remove the HARD drive bracket.

    To build again SSD shouldn't be complicated.

    I hope that you have created a recovery media. If this is not the case, do. This recovery media, which you can use to install the original version of Windows that you got with your machine.

  • Satellite L70-A-154 and WIN7

    Hello
    I plan to buy a [Satellite L70-A-154 | http://www.toshiba.be/fr/laptops/satellite/l70a/satellite-l70-a-154/], but it is possible and easy to install Windows 7 Pro?
    Thanks :)

    Hello

    I ve checked the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and I must say that this model of laptop is supported for Win7 64 bit and you can find drivers, tools and utilities there.

    Win7 installation should not be problematic.
    Please note: when you purchase your beginning of laptop preinstalled original OS and CREATE a RECOVERY MEDIA before you start to install Win7.

    It is very important.

    If you need assistance with installing Win7 let us know.

  • Extra RAM for Satellite L70-B-14Z

    Hello
    I cannot find anywhere how to adapt the increase ram for my new Satellite L70-B-14z, am I to guess that this model should be returned to the Toshiba authorized service center?

    We can just confirm that this model be OK to win 10 updated.

    I'll take delivery of this unit this week.

    Any help and advice will be great

    Tony

    According to specification for laptop, your laptop can be upgraded up to 16 GB. Unfortunately your laptop isn't the cover of RAM in the bottom corner so the whole bottom cover needs to be removed and it must be done by the authorized service provider.

    What about Win10? Win 10 support is not officially started, and now Toshiba offers no additional drivers for the upgrade. Anyway, you can download and install Win10 and test your machine, how it works.

    Before doing this, create a recovery (DVD or USB) media. This recovery media, you can use if you want to install the original version of Windows that you have with your machine and that he put your laptop to factory settings.

  • Re: Satellite L70 - B - game crashes when the battery removed

    I have a portable Satellite L70 b - 130 and I have the following problem:
    If I remove the battery from the laptop and turn it on, when I start the game it crashes... If the battery is connected and I enter the game, it works

    Hello

    Does the system crash or just this game here?

    You have the same problem as other games and other applications running?

    Are you using the same parameters of the power station with or without battery?

  • Satellite M70-181 to perform the recovery of proceeds of DVD USB drive

    Hello

    I am trying to recreate the image on my Satellite M70 181 using the product recovery DVD.
    Should be easy, you might say, but the internal DVD player no longer works.
    I don't want to buy a new laptop this quite old, so I borrowed an external USB drive.

    After that I inserted the product recovery DVD the notebook starts from there, autoexec creates a RAMDRIVE and copy the files from there.
    "Recover.bat", the external DVD player analysis must be accessible via the X: drive. However, there are has some missing files on the DVD to mount the external DVD drive: there is no file % RAMDRV%\TOOLS\USB20. DEV, nor a file % RAMDRV%\TOOLS\USB11. DEV.
    Failure of the attempt to mount the external hard drive, recover.bat starts a loop saying 'Please insert Recovery CD #1!'.

    What can I do now? Help, please.

    Thanks in advance

    ULi

    Hello

    As much I know this model of laptop can't boot from USB CD/DVD drive and CD recovery.
    You can boot from the USB FDD drive and a bootable floppy drive but I doubt that this is not possible with a Toshiba restore disk.

    I think that you could use this recovery disk as part of internal ODD.

  • Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

    Hi all

    I have a Satellite L70-A-139 youcef.
    And at the back of the laptop, there is a cover that is fixed with a screw.

    Wil I void the warranty when I unscrew and take a look?
    I want to upgrade my HDD to SSD.
    The motherboard supports Sata III: D.

    Thank you!

    No, the mandate must still be valid.
    There is a removable cover at the bottom of the unit as shown here:
    [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

    Then you should be able to upgrade the RAM and HARD drive.
    I think this info should be mentioned in the user manual too.

  • Satellite L70-A-139 - HD4600 Intel driver updates

    Hi all

    A week ago I bought a Satellite L70-A-139 (PSKNEE-02J02UBT) and its all ready and value.
    Everything is up to date except the HD Intel display drivers.

    Today, I checked on the Intel site and their drivers are very recent than mine.

    My drivers: 10.18.10.3345
    Lasted(non-beta) pilots: 10.18.10.3412

    When I let windows search for a newer driver he know that my driver is up to date.
    When I check the gas station of Mohammed, that I'm up-to-date.

    So when I download the drivers on the site of intel and I try to install, I get this error message:

    "The driver you want to install is not verified for this computer. Ask manufacturing for the drivers.
    The installation will be interrupted. "(It is translated from Dutch)

    Then when I go to the site of Mohammed, the driver for my Satellite L70 is: 10.18.10.3308
    How can I have a more updated version, then the version lasted? Why can't update?

    It's continue because the beta-pilot gives support for thief and Titanfall (games)
    As the integrated card is more friendly energy, I want to play on it. (When I am mobile)

    I found a way around this error message, but I first want to know what modifedd youcef to drivers?
    So are these importand?

    Thank you

    So general, there is great difference between the driver support to screen for desktop and mobile machines. Manufacturers of laptops offers these drivers and suitable display drivers do not allow maximum performance because of problems or damage of GPU overheating.

    Here are the reasons why the GPU manufacturers do not support the drivers directly and this is the reason why you cannot use the GPU support page original drivers.
    Can imagine you the situation when you install the driver from the Intel site beginning to use it and a few days later GPU will burn out. Who should be responsible for your damages? You could say I have warranty valid but Toshiba will say sorry you used the failure to load driver.

    I mean, be careful with that. Computer laptop is brand new and you should think about security.

Maybe you are looking for

  • Connectivity Bluetooth on computer problem hp laptop pavilion g

    HP Pavilion laptop computer g6 with home premium windows 7 (64 bit) OS. Problem with bluetooth recognizing microsoft bluetooth keyboard (model 6000) and paved digital microsoft bluetooth. Driver Bluetooth is atheros 802.11b/g/n wifi adapter AR9485. M

  • Color HP LaserJet Pro 200 printer M251n Imaging drum

    I am about to enter the market for color laser printer and reflected on the CP1025 in option, but I'm leaning toward the M251n. It is purely for domestic use - no commercial! My curiosity is the imaging drum? for the CP1025 replacement is offered lif

  • How can I activate the power icon?

    When I installed Windows 7, last weekend, there was a power icon in the system tray that I inadvertently disabled.  How can I get that back?  There is no entry for power when I click on Customize on the systray, so I can't enable it through the user

  • Find the devices tab, then click on 'add a device '.

    I just set up my desire to 4500 and received a page telling me to create an account on hp connected, select the "Devices" tab and click on 'Add a device' then enter the claim code on the printer (which only lasts 24 hours!). I can't find the tab "Dev

  • Corta is con el alto performance message

    Mientras estoy utilisando el ordinador to corta solo norton y poco antes envia me a message in Viola performance, etc... Return a reiniciarlo ago veces me pide una Restauración sistema o arranqua usually