Satellite L750 - BIOS check error and now the screen is blank

Similar Questions

• My daughter dropped her ipad and now the screen is yellow - help!

  My daughter has recently dropped its ipad and now the screen is yellow - help!

  Screen most likely is damaged or it has hardware problem.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  If it does not help take your device at the Apple Store for further diagnosis. Good luck.

• My Air iPad screen has locked and now the screen is black can not disable either help

  HHelp my iPad locked up Air, tried to turn it off but nothing happened and now the screen is black, what should I do?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

• Random buttons and now the screen is tense! Help!

  Help, please!  One of my friends thought he was being funny keys at random, multiple at once, when I told him not to do so.  He pushed the buttons especially on the right side and part of the middle.  I don't know if it was a specific button or a little push at the same time that caused my screen to go wide.  Now, the screen looks stretched.  There is nothing in the settings, I found that it will change back and I don't know exactly what buttons were pushed to get there.  I really need help.  I'm horrible with computers and nothing on the web has been able to help me, YET!  I hope that someone out there knows the answer or is willing to help me understand.

  Wednesday, January 21, 2015 23:12:23 + 0000, DesperateForComputerHelp wrote:

  Help, please!  One of my friends thought he was being funny keys at random, multiple at once, when I told him not to do so.  He pushed the buttons especially on the right side and part of the middle.  I don't know if it was a specific button or a little push at the same time that caused my screen to go wide.  Now, the screen looks stretched.  There is nothing in the settings, I found that it will change back and I don't know exactly what buttons were pushed to get there.  I really need help.  I'm horrible with computers and nothing on the web has been able to help me, YET!  I hope that someone out there knows the answer or is willing to help me understand.

  Right-click on the desktop and choose screen resolution. Choose it
  the default for your screen, as resolution its documentation says you.

  And don't let ever your 'friend' near your computer again.

• Re: Satellite L750-11w - horizontal lines appear on the screen

  I seem to have a problem with my screen... for example when I play cs (100 fps)
  When I move my mouse some horizontal lines apear... they ar not colored apear just like someone cut my screen... Another example is when I move my window meessenger or any other window if I slowly move across the screen it apears as it is made of parts? ...

  This is annoyng me... If my description is not enough good small an enswer to please tell me and I'll try to eplain it better or make a demo...
  the laptop has a geforce gt 525 m gpu and the sistem has 8 GB ddr3 1333 mhz, if this can help

  I didn.t overthrow what whether at this point think I didn.t drop it I didn.t hit it... This can be... I just noticet this a couple of days... .this and the fact that it starts a little slower than befor... windows but the start thing is form office 2010

  Hello

  Connect the external monitor and check if the same lines would be visible on 2nd screen.
  If these lines are not visible, then it means that the internal display may be defective.
  Otherwise, it might be a graphics card problem if line would appear on two screens.

• I have mistakenly left dropped my laptop and now the screen is showing black streeks, what can I do

  I mistakenly let down my laptop and there now black streeks two big places that become long and more.  Help, please

  Hello MOTHERANGEL,

  What you describe (especially the part about the bigger) resembles the screen LCD has been damaged. Black spots appear when the liquid crystal begins to spread out of cracks, over time the task will grow and grow.

  If you have some HP ADP (protection against accidental damage), you should contact HP for repair / replacement. Otherwise, you will need to repair the screen or get it repaired.

• I pushed buttons and now the screen one tinted sepia?

  original title: I pushed buttons and now it's all one tinted sepia?

  Hi, I was at my computer, typing, and I was trying to hold down the left button. I tried to type a letter near the shift on this side bar and I pushed buttons, and then it turned a sepia tint. I don't know what I pushed, I could have pushed the CTRL ALT FN or the WINDOWS KEY, but I'm not sure. I can't get the color back, but the computer works fine. Thank you.

  I would just add,

  No doubt, you can access your graphics card,

  Right-click on your desktop and select properties of the graph,

  Most of the sections have Restore / restore the default values listed.

  I would color enhancement would be a good place to start.

  

• I dropped my laptop and now the screen is yellow tint

  Hello

  Recently, I dropped my laptop and turned it on to find that the screen is tinged with yellow.
  Toshiba will be able to replace my screen?

  Of course they can do. I can only imagine that you wait a few days because they have to order new parts.

  If you need addresses or numbers of phone for authorized providers in your country, you can visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck

• my mother was dusting his keyboard while the computer was on and now the screen is turned 90 degrees sideways and doesn't know how to say back to normal. Any suggestions?

  She does not know the combo of keys that it to get the screen to turn 90 degrees.  How do correct us the orientation of the screen?

  This phenomenon of rotation screen sometimes inadvertently some keystrokes (the cat walked on my keyboard).  In your case, MOM dusted off the keyboard.

  See if you press on the keys Ctrl-Alt top/arrow down, arrow rotates screen 90 degrees at a time.

  If this does not work, we will need to know your system brand and model and see if we can look at the rotating screen for you shortcut keys.

• IdeaPad 500 connected to TV - now the screen is blank

  Hello - we have a 500-15ACZ Lenovo Ideapad laptop. My son connected the laptop to a TV with an HDMI cable. The TV and the computer screen showed the same thing.

  It has disconnected and closed the laptop screen to carry it out in another room. When he opened this back to the top of the computer screen was empty. He tried to restart/reboot the laptop, but it is still a blank screen. Is there a combo Fn + key that modifies the display? I can't find documentation on it anywhere...

  The power light is on and you hear the operation of the hard drive - we can see anything. Can someone tell me what Miss them us? I'm sure it's something easy... Thanks in advance.

  Processor: AMD A10 - 8700P processor (AMD A10 - 8700P): memory: 8 GB 1600 DDR3L: operating system: Windows 10 family 64(EN:English): hard drive: 1 TB 5400: optical drive: recordable DVD: Wireless: Bluetooth Version 4.0; Lenovo Wireless AC: camera: camera HD 720 p: monitor: 15.6 1920 x 1080:

  Thanks, CyberSimian, for your response - which has not been around.

  We went back to the TV. Turn off the laptop, plugged into the TV and started. BOTH screens were display. We have unplugged the TV and the computer screen remained.

  STRANGE. But works again!

• sister baby happened to my computer and now my screen size is very small, please help.

  my little sister messed with my computer toshiba laptop and now the screen size is like 1/3 down. could someone please help? I have windows vista.

  Hello
   
  In addition to suggestions of Rick Rogers, a simple reboot should do the trick.
   
  You can also change the resolution and check.
   
  Change the screen resolution
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
  Let us know the status of the issue.
  
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please

  I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please, PS is not the first time I used these cartridges, but this is the first time I had no problem

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.