Satellite L750 - scuffed or scratch the LCD screen

Similar Questions

• Satellite M60: grey spots on the LCD screen

  It seems that I have a problem with my Satellite M60. I noticed a few more dark spots on the LCD screen. Looks like the screen is dirty (grey size spots about 5-6 pixels), but it seems to be not in the surface of the screen, but on the inside (the surface is perfectly clean) and, certainly, is not the problem of dead pixels or subpixels.

  Is it possible that there is little dust inside of screen? Is it possible to clean it somehow? Such a strange thing is covered by the standard warranty?

  Hi Fox

  Possible it s not a BIOS issue. Of course, I read the other case, but perhaps it s not the same question.

  But do not forget that you are using the good BIOS!
  A lot of users here uses a bad BIOS or bad BIOS procedure.
  In addition, the BIOS version performed from 14/09/06. That is why it s not very old updated.

• Satellite A300 Question on replacing the LCD screen

  I had a minor accident with my A300, which ultimately ended in me the screen cracking.
  (Yes, I know, what a fool. Believe me, it was a complete accident.)

  In any case, the after-sales service is closed until January 5, but I was wondering if anyone might know how a replacement screen would be me back?

  Will it cost me more than $80 just to have the 'thing' rated and side on, and I need to know about how I look, as I recently had my end of maternity payments, so we are a middle-income.

  Time to talk Abou...

  Change the LCD is a little tricky. You have to remove a lot of and remove the screws much.

  This is a forum user to Yes, so I think nobody with experience here's how. I think the best is you go in an ASP.

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• Satellite A100: Cannot switch to the internal screen

  I apologize in advance if the answer to this question is easy - I have major concern.

  I am an instructor and yesterday was to use a projector to clients to connect my laptop to a session. All was well at first with the laptop screen and projector showing the image, but one of the participants decided to help me and I lost the picture on my laptop (even if not connected to a projector)

  When I turn on the laptop everthing shows on screen (Toshiba etc.) until I get into Windows, then it shows just the ripple background with no icons, however if connected to a projector is displayed.

  I tried fn F5, but is not offer me options normal and I can't reset it.

  Thanks in advance for any help provided

  I put t know what the problem is here, but using the FN + F5 key combination, you should be able to get the LCD screen only. If it works please check display properties. Perhaps it is - someone has activated the extended view option and the value of LCD as second.

  Check this possibility.

• Vertical lines on the LCD screen of the Qosmio G20

  Hi all

  My Toshiba laptop shows a few vertical lines on the right side of the screen and the number of lines that appear are increasing day after day
  I have connected to an externel disply and Born no problem with that so I'm quiet sure that this is the problem with the lcd screen.

  My laptop is not so much in a guarantee period is this screnn is reapairable or not

  Please help me.

  Please see the attached images

  [http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink | http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink]

  regarding
  AERTS

  Why did you create a second thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=139420

  It s easier than a single thread and, therefore, you must follow your first topic!

• Using the "back button" update for the LCD screen on the 60 d

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  pixeltaker wrote:

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  You must go to the menu and move the quick mode to Live Mode.  In fast mode, when you press on the "back" button, the mirror flips down (click) and the camera tries to focus.  He has not yet made the photo.  To take a photo, you must listen to the AF confirm beep, then press the shutter button.  Quick mode is in fact the "snail", in my opinion .  Read more about this on page 160-168 of this manual.

  

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• The LCD screen no longer works and no housing or other lights are displayed since the last update.

  The LCD went blank since the last update from microsoft, probably for windows 8.

  I am running wireless through Windows 7, 64 bit.

  Everyone knows this?

  Looks like the LCD screen is out. It might be the screen, or possibly a link inside the printer.

  However, it seems that the printer is able to be used under the actions of the façade. We can print, scan, and even perform a scan-to-print copy.

  However, if you want to take advantage of the features of back cover then you will want to consider a different printer because it sounds like this is to have an electrical problem in the display. Think to call the HP Technical Support on the upgrade program to get a new unit reconditioned at a discounted rate.

• Is it possible to turn on the LCD screen?

  How to turn on the LCD screen by programming? Is there an API?

  Try Backlight.enable (true);

  However, the maximum time to stay on East is 255 sec, so you should run a timer if you need on longer (and look at your battery :-))

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• "ecmprod-index1' on the LCD screen? PE2950

  I have a strange message scroll on the LCD screen.  It is said:

  ecmprod-index1

  Can someone tell me what this means?

  Hello

  aimnano

  I have a strange message scroll on the LCD screen.  It is said:

  ecmprod-index1

  Can someone tell me what this means?

  Who does not resemble an error message. Looks like a custom message. IDRAC has an option to set custom LCD messages.

  Thank you