Satellite L755 - start with recovery CD stops

Similar Questions

• Re: Satellite L755 - the first recovery disk is damaged

  Hello world...

  I just bought this laptop (Toshiba Satellite L755) and I had to get it back by 4... recovery disks, but I discovered the first recovery disc is damaged and I know not just why... I read the manual and disks 4 recovery successfully without any problems, I did... so please tell me what's I'm going to do about it?

  The other 3 drives works well, I won't need that first data drive where and how can I get them?

  Sorry, but your question is really strange.
  All we know is that you want to install the recovery image and this first disc does not.

  What type of solution you expect now?

  You can boot OS preinstalled?
  Pre-installed OS Toshiba original one?
  Can you maybe create these discs again?

  I put t really know what to say on this subject. If you are unable to create new disks, created doesn t work but you want to have original Toshiba recovery image pre-installed on your laptop, I'm afraid, you buy the Toshiba restore disk m.

  Another question: can you start HARD drive recovery facility as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm?

• Satellite C655D - problem with recovery

  Hello
  I have the Satellite C655D-S5515 with no additional DVD.
  I want it back or fabric.
  When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
  How can I make laptop recovery?

  At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

  In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

  If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

  Good luck

• Satellite L755 - creator Toshiba Recovery disk cannot be used

  I L755 series PSK2YE for 40 days, and I have a problem with the part recovery disk creator. According to me, it lacks something I simply don't have the TRDCLcher.exe in the menu. I uninstalled probably by mistake or so.

  I still have the recovery disk on D: partition.

  Is there a possible way to get this file back then I do drive recovery?

  Kind regards
  Alec

  Hello

  This means that you can start t the creator of disc recovery or what happened exactly?

  Recovery disc creator can t be reinstalled because it s only preinstalled on your laptop. I think that in this case, your only chance is to leave the drive recovery HARD option and reset Windows to the factory settings. With the box settings, you can use the recovery disk creator.

• Satellite A200 starts with the message "missing operating system".

  IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

  I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

  Can you make suggestions?

  Hello

  Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

• C855-1VT satellite - cannot start media recovery disk

  Hello

  I have the laptop above that was dumped on its edge causing the hard drive to the jam and fail.
  This means no access to the system recovery, so I ordered arvato shop Toshibas Recovery Media recovery media.

  I installed a new HARD drive has slipped into the recovery disc and boom, no bootable media insert system disk.

  I tried the disc on other laptops, same thing, with no bootable media, but back to arvato who kindly sent me disks replacement... you guessed it... exactly the same thing so I put in my windows 7 install cd and it read the disc properly.

  Arvato said they asked toshiba to check the image which they did and found no errors, but the stock of arvato could be faulty, I thought. in any case, they offered a refund which doesn't really help.

  I may be missing something so this post hoping tosh guru of you might be able to help :)

  Thanks in advance,

  Night...

  Hello

  Maybe the image is OK, but the CD/DVD drive cannot read the disc of Arvato.
  What you could do is to copy this recovery disk to another disk using another computer.
  Then you could try to start the device using the new disc copied.
  May be worth a try.

  In addition, you can try after workaround:
  Go to BIOS and check secure boot settings and the boot mode.
  What are the settings appear in the BIOS?

  I m application because you said you could boot from Win 7 disk, in this case secure boot must be disabled and the boot mode must be set between UEFI and MSC mode.

  In case you want to install Win 8 secure boot must be enabled a UEFI should be used

• Satellite U940 starts with error message after BIOS update

  Hello, I have apologizie for my English, I know that's not the best...

  I made a mistake very stupit, and now I can't use my new U940 satellite - 103.
  I updated the BIOS from version 1.2 to version 1.3.

  Unfortunately, I did not have any recovery media (I'm stupid, yes!).
  When I turn on the ultrabook, he said:
  "Your PC need to be repaired.
  error 0 x 0000001
  Does anyone know what I can do, please?
  THX

  Hmm you see a Toshiba screen when starting?
  Are you abele to access the BIOS?

  If this isn't the case, I guess something was wrong during the update and you will need to request the service in your country to fix.

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• Where to start with recovery after disaster

  We start making a disaster recovery plan for the data center.  We have a small failry installation using vSphere 4.1 Enterprise with 6 hosts (blades) and about 30 vms, Windows, Linux, and Netware running on an IBM BladeCenter S.  The BladeCenter S shared storage in the chassis, and we also have a storage DS3300 iSCSI array.  In the event that something happens to this building we want to be able to bring our most important vms (~ 12 of them, the others will be restored from backup but not immediately) upwards to another place which is connected to this construction over a fiber of 1 GB connection.  We do not necessarily expect to provide the same level of service, just that our basic services are available.

  I understand this is a major project that can be answered in a forum, but I don't know where to start, if someone could point me in the right direction or give me some ideas, I would be happy.

  You need to take a look at the Site Recovery Manager. SRM is unfortunately not the whole solution, you also need the level of the SAN for this replication.

  If you storage does not support it or it's too expensive - you have the option to upgrade to vSphere 5 and use the replication host + RS.

• Satellite A200-1TW with keys (play, stop, pause) with the other player

  Hey all,.

  I was wondering, is it possible to change the buttons on the top of the keyboard? Because I now use a nice, built-in media player in the vista sidebar. However, as next song and pause/play buttons do not work on this one. And there is no option in the game itself, so is there another way?

  Thanks in advance :)

  I agree with Akuma.
  Can't set keys like play, pause, and stop in the Toshiba Software
  I m using WinAmp and this application supports these buttons because I could activate this option in the settings of WinAmp

  If your player does not support these settings then you will not be able to use these buttons with your favorite software

• Cannot retrieve the Satellite C855D-15W with recovery DVDs

  Because of the issue, had to do a factory reset.
  Laptop came with preinstalled Win 8.

  Order recovery of Arvato media.

  In vain several times tried to recover the laptop using the discs. Same problem occurs: -.

  complete partition initialization
  * "Copying files please wait" 1.5 to 2 hours "
  * "An error has occurred.
  error: 0002
  Copy image error
  Please press OK to shut down the computer.

  Now the HARD drive is completely removed.
  Suspect the recovery media and asked for replacement.

  Any help / settings would be appreciated.

  Thank you
  concerning
  Piping Plover

  Hello

  In my opinion, there are two reasons that can explain why the recovery procedure fails.

  (1) failure of HARD drive
  (2) failure of the recovery disc

  I think you should first check if the disk HARD isn t the troublemaker.
  Go to BIOS (F2) and check if the HARD drive is listed on the first page of the BIOS.
  In case it is, the HARD drive may be OK

  In this case, the recovery disc may be defective.
  In this case, you should get in contact with the provider/supplier (Arvato) disk for the new medium.

• satellite 2410: problem with recovery CD

  I had problems with laptop computer virus and decided to use the recovery cd

  At the end of installation, I get the message extraction failed and that there are currently no operating system on the laptop.

  How can I fix this problem?

  Hello

  check the BIOS settings? Turn on the laptop and immediately press the ESC key, load default settings and change the CONFIGURATION of the DEVICE to 'Installation of the OS' and try again!

  Second step: is your CD ok? Is there anywhere a scratch?

  Hans Bye

• Re: Satellite A200 - start with BSOD

  Hello.

  I have a Satellite A200 which I had for about 18 months. I recently installed a burning software and as soon as it was completed a blue screen was displayed telling me the computer had been shut down to prevent damage.

  It then restarts automatically and I try to log on, but after about 15 seconds, it goes the same blue screen and reboots again. I tried booting in safe mode but that doesn t help.

  I m not really competent computer so I m not sure how to proceed.

  If you have any advice really id appreciate it.

  I think that if you can also boot into safe mode, you need to reinstall Windows. He s strange if your computer only shows BSOD after installing the burning software, but however, I think that there is no other way.
  Do you have what burning software installed?
  Maybe it s a virus and is not a problem of the burning software.

  So to use the recovery disk and reinstall Windows. The HARD disk is reformatted completely then backup your data first if you can put the HARD drive in an external enclosure.

• Re: Satellite L850 - starting with "no boot device - please reboot"

  I tried to correct this L850 - portable 1LK which keeps crashing and so on. But while going through the options in advance in the troubleshooting section (Windows 8). I tried, I think its called Toshiba Recovery tool and click on the option to erase data, assuming that he would remove all corrupted data, so I could reinstall from factory settings.

  But now when I boot it just says "no boot device - please reboot" and when I restart it does the same thing. I tried to open the recovery partition, but there are a lot of different buttons that supposedly bring it I don't know if I support on the right. Any help?

  On this virtual path, it is not easy to say what the problem is here. In my opinion, you should try to reinstall recovery image once more.
  For assistance with this please check http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.